This is technological advancement from Servotech that we have produced Sine Wave home UPS & Inverter that works on the worlds most advanced technology DSP (Digital Signal Processing The Main advantage is that it has an Active Power Factor Control Topological pulse charger. This creates minimum water loss & increasing the battery life immensely. For those areas where power goes off frequently, the system has been provided selectable charging as high as 15 amp. to give optimal charging time for batteries. It can also charge the battery from 100V to 290V input. Salient Features:- » Provides pure sine wave output. » Instant switchover for the computer to run uninterrupted during power cuts » Provides extra long back-up for computer » Space saver-ideal for modern day households » User friendly display » Saves 40% electricity bill as compared to square wave inverter » Incorporates smart overload sensing and short-circuit protection with auto reset.
1.Super wide input voltage range:90V-280V 2.Four-steps AVR 3.Powerful charging current:500W up to 15A,1KW-4KW,up to 25A 4.Protection against short-circuit 5.Special overload protection,when it is overload,it will lock the unit automatically, when it restores,it will start the unit automatically again 6.when the mains come,it will start the unit automatically 7.Function that it will change its frequency instantly it is able to drive inductive loads,such as air-conditioner,refrigerator, motor,and so on 8.With RS232,it can realize software control function. 372*122*195CM 7.8KG.
Home ups for domestic use. It available in 50 0va, 900va, 1000va, 2000va Emergency fan is for single users Car ups is available in 75watt, 100watt, 150watt, 200watt Single pieces packing
Home ups Tpzi (square wave) waveform Single pcb design 110% overload protection 300% short-circuit protection Over 92% efficiency Suitable for all type of appliances Almost noiseless operation
01. Nominal power Capacity: Volts-Amps/Watts(VA/W): 1000VA/700W 2000VA/1400W 3000VA/2100W . 02. Input Nominal Voltage: 110/115/120Vac or 220/230/240Vac Voltage Range:60-138VAC or 115-300VAC Frequency Range:50Hz: 46-54Hz(Default), 60Hz:56-460Hz Power Factor: í¦0.95 í¦0.97 . 03. Output Voltage: 110/115/120Vac or 220/230/240Vac Frequency Synchronized: 46-54Hz or 50Hzí+ 0.2Hz(Line mode)50Hzí+ 0.2Hz(Battery mode) Wave-form: Sine Wave Distortion: í_3% (Full linear load) í_4% (Full linear load) Overload Capability: 108%-150% for 30sec: í¦150% for 200ms Crest Ratio 3: 01 . 04. Battery Type: Sealed Lead-Acid, Maintenance free Capacity: 12V/7AH*3pcs 12V/7AH*8pcs Back-up time: (Full /half load) 5mins/14mins 9mins/21mins 5mins/17.5mins Recharge time: 5hours to 90% of full capacity after full load discharge . 05. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa . 06. LED indicators Status Battery level, Battery mode, Line mode, Inverter, Bypass, Overload, fault. 07. Audible Alarm: Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously. 08. Acoustic Noise: At 1 meter distance 45dBA 50dBA. 09. Communications DB-9 Connector: RS232 Serial interface; Power monitoring and unattended systems shutdown via kavass2002 Intelligent Slot SNMP: Power management from SNMP manager . 10. Network Surge Protection: RJ45 I/O port available for 10base -T network or Fax/Modem . 11. Environment Operating Temperature: 0-40 Operating Humidity: 20-95% non-condensing . 12. Applications Servers Data-center, Critical network, Sensitive electronic equipment, Telecom. 1KVA500*240*335mm 2KVA3KVA 590*335*480mm Cartons, foam and wooden.
1. Nominal Power Capacity: Volt-Amps/Watts(VA/W) 6000VA/4200W 10000VA/7000W . 2. Input Nominal Voltage (Single): 220Vac Voltage Range: 176-300Vac Frequency Range: 46.5-55Hz Power Factor: í¦0.95 í¦0.97. 3. Output Voltage Range: 220Ví+ 2% Frequency Synchronized: 46.5-55Hz or 50Hzí+ 0.2Hz(Line mode)50Hz0.2Hz(Battery mode) Wave-form: Sinewave Distortion: í_3%(full linear load) í_4%(full linear load) Overload Capability: 108%-150% inverter mode for 10 minutes í¦130% by pass mode for 1 minute. 4. Crest Ratio: 3: 01 5. Battery Type: Sealecd Lead -Acid, Maintenance Free Capacity: 12V/7AH*20PCS 12V/7AH*40PCS 6. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa 7. Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously 8. Acoustic Noise: At 1 meter distance 45dBA 50dBA 9. Communications: DB-9 Connector RS232 Serial Interface; Power monitoring and unattended systems shutdown via software 10. Applications: Servers Data-Center, Critical network, Sensitive electronics equipment, Telecom. 705*435*950mm Foams,cartons and Palet.
International specifications
Shenzhen ZLPOWER Electronics Co., Ltd is a leading manufacturer and exporter focus on UPS (uninterruptible power supply) and Inverter, battery: 1. High frequency online UPS: 1kva-20kva 2. Rack mount UPS: 1kva-10kva 3. Line interactive UPS & Offline UPS 3. Array UPS 4. Home UPS/ Power Inverter: 500va-2kva 5. Lead-acid battery/ UPS battery: 1.2ah-200ah 6. Battery Cabinet 192*460*348mm
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.