Autoclave Pressure cooker type, Mirror Finish, Non-Electric (External Fuel Heated), Capacity 40 Ltrs Specifications: It uses steam to sterilize medical equipment, surgical dressings, glass, utensils, etc. rapidly and efficiently. Made of heavy duty seamless aluminum sheet. Long lasting. The lid is equipped with both a safety valve and steam release valve. A pressure gauge allow precise pressure tracking and safety. Mirror Finish. External Fuel Heated. Perfect for hospitals, public health centers, health stations, clinics, and research institutes. Size (D x H) : 350mm X 330mm + 90mm Lid. (14x16). Approximate Capacity (Ltrs.) : 40 Liters. With lid. Finish : Mirror Finish. Suitable for two Sterilizing / Dressing Drum (11x9) & (11x4.5) (Drum Not Included Drum Cost is Extra). Supplied with inner & outer stand. OPERATING INSTRUCTION / INSTRUCTION MANUAL : PASTED ON THE AUTOCLAVE. All aluminum deep-drawn seamless construction Mirror Finish. External Fuel Heated Supplied with inner & outer stand. All autoclaves are constructed from heavy gauge aluminum. It generates steam under pressure and temperature between 120C to 135C. Made from seamless Aluminium, top-loading autoclaves. Seamless construction ensures a bacteria-free environment, 25-30 minutes sterilizing cycle at 121c. With two stages overpressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve. With heat-resistant handles and steam release/control valve. Pressure Gauge: Color-coded pressure gauge showing internal chamber conditions during the cycle. The sterilization zone in green color is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121c to 127c. Dial size- 2.5?,Dial show measurement in 2 units (i) kg/cm² (ii) lb/inch². Full scale dial of pressure gauge is 0-30 lb/ inch or 0-2 kg/ cm. Caution zone in red color.
Autoclave The innovative, efficient design of elaine autoclave offers such feature and benefits that make sterilization of any of your instruments easier and more effective then ever. Elaine autoclave complies with en-13060 standard. It can sterilize any kind of hollow, porous, wrapped or unwrapped instruments. At present, the fractionated vacuum is the most advanced and safe system for the elimination of air pockets. Thanks to the different phase of vacuum alternated to the compression phase, the air pockets both in the sterilization chamber and in the hollow and porous tools are expelled and the validity of the sterilization cycle is so guaranteed. On completion of the selected sterilizing program, also, elaine automatic, pulsed, vacuum assisted drying phase to ensure instruments perfectly dry. Wood case
The Vertical Autoclave is an indispensable medical equipment used in hospitals for sterilization of surgical instruments, laboratory glassware, and medical waste. With its vertical chamber design, it maximizes space efficiency while ensuring thorough sterilization. This autoclave operates with steam under pressure, effectively eradicating harmful microorganisms. It boasts precise digital controls and safety features, such as automatic pressure and temperature monitoring. Its durable construction and corrosion-resistant materials ensure longevity. Hospitals rely on vertical autoclaves for their crucial role in infection control, maintaining aseptic conditions, and ensuring the safety and health of patients and healthcare professionals, making it a vital asset in hospital settings.
Material Stainless Steel Shape Cylinder Voltage 220V Pressure High Pressure Surface Finishing Polished Operating Mode Automatic Usage Industrial Use Specialities High Tensile, High Quality, Corrosion Resistance
Carbon Fiber Industrial Composite Autoclave Our industrial autoclave range includes a specialized pressure vessel designed exclusively for the production of composite materials. This carbon fiber autoclave, a top-selling item, is a pivotal tool in the manufacturing of composites. Composites, also known as composition materials, are created by combining two or more materials with distinct physical or chemical properties. This combination results in a material with unique characteristics that differ from its individual components. For the production of composites, the autoclave machine for carbon fiber by ETSA, one of leading autoclave machine manufacturers, stands as one of the most effective and widely used techniques. In this process, a two-sided mold set is assembled, forming both surfaces of the panel. This mold set is then placed within the industrial autoclave, where it is exposed to both the required elevated pressure and temperature. Manufacturers rely on these carbon fiber autoclave for sale to process and cure their composites. The high pressure and heat generated within the autoclave are crucial for achieving the desired fiber content in the final product. This ensures the production of composites with optimal properties and performance.
Composite autoclaves are specialized pressure vessels designed to cure composite materials under precisely controlled conditions. With continuous advancements in efficiency, control, and speed, composite autoclaves for sale remain a cornerstone technology for innovation in the world of composite materials. Composite Autoclave Types Carbon Fiber Industrial Composite Autoclave Autoclave for Composite Curing Laboratory Composite Autoclave The Advantages of Composite Autoclaves in Industrial Applications Composite Autoclaves: Elevating Industrial Manufacturing with High-Performance Curing Composite materials have become game-changers in numerous industries due to their exceptional strength-to-weight ratio, design flexibility, and superior performance characteristics. However, unlocking the full potential of these materials relies heavily on the curing process. This is where composite autoclaves step in, offering a multitude of advantages over traditional curing methods in industrial applications. Superior Quality and Performance: Precise Pressure Control: Unlike ovens with limited pressure capabilities, composite autoclaves from ETSA, one of professional composite autoclave suppliers and composite autoclave manufacturers, can apply significantly higher and precisely controlled pressure. This ensures optimal compaction of laminate layers within the composite, eliminating air pockets (voids) and achieving complete resin flow and fiber wetting. These factors are paramount for achieving the desired mechanical properties, strength, and overall performance of the final composite part. Uniform Heating Throughout: Composite autoclaves for sale guarantee consistent and uniform heat distribution across the entire composite structure, regardless of its size or complexity. This even heat distribution is crucial for attaining consistent material properties throughout the part, eliminating inconsistencies and potential weak points. Environmental protection and energy saving: The autoclave molding process does not use harmful substances such as solvents and paints, which has the advantages of environmental protection and energy saving. The Key Uses of Composite Autoclaves Curing High-Performance Composites: These small composite autoclaves are essential for curing advanced composite materials like carbon fiber and Kevlar. The high pressure ensures optimal compaction of the laminate layers, eliminating air pockets and achieving complete resin flow for maximum strength and performance.
FUGE dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. Installed with double safety protection devices on our dewaxing autoclave, FUGE boilerclave works at reliable and safe condition. Features: Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency. Easy operationï¼?Easy to operate in automatic and manual mode. Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions. Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance. Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis. Green Optional Heat Recovery Unit to save cost
Leaching Autoclave The Ceramic Core Leaching Autoclave is designed for removing the silica-based ceramic cores. We have delivered many sets of core leaching autoclave to the aerospace turbine blades manufacturers all over the world. Except for the ceramic core leaching autoclave, we also can customize the core leaching autoclave for aluminum core. The core leaching autoclave is widely used in high end precision castings manufacturing, and turns to be the most important core equipment during the investment casting. Key features Efficiency : FUGE core leaching autoclave completes core leaching within several hours Safety : FUGE core leaching autoclave has no caustic liquid and air leaking to ensure the safety of environment and operator during its running . Stability : FUGE core leaching autoclave uses international brand key parts to ensure the reliable and stable running. Saving cost: FUGE core leaching autoclave use caustic and water circulating system aims to save costs. APC: FUGE core leaching autoclave is easy to operate and maintain through Siemens PLC control system and FUGE Advanced control technology. Telecommunication: FUGE core leaching autoclave has remote monitoring system facilitates the diagnosis and maintenance of the autoclave . Parameter list No. Name Specification 1 Model FG-TXF600 FG-TXF750 FG-TXF1065 2 Diameter 600mm 750 mm 1065mm 3 Depth 1200mm 1200 mm 1800mm 4 Effective working diameter 520mm 700 mm 990mm 5 Effective working depth 1000mm 1000 mm 1400mm 6 Maximum design pressure 10 bar 10bar 10bar 7 Normal working pressure 6 bar 6 bar 6 bar 8 Control system Siemens PLC Siemens PLC Siemens PLC
Dewaxing Autoclave Dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. We also installed double safety protection devices on our dewaxing autoclave. Dewaxing autoclave key features Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency. Easy operation Easy to operate in automatic and manual mode. Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions. Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance. Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis. Green Optional Heat Recovery Unit to save cost. Parameter list 1 MODEL FG-TLF1000 FG-TLF1200 FG-TLF1400 2 Design pressure 1.0 1.0 1.0 3 Design temperature 183.2 183.2 183.2 4 Working pressure 0.9 0.9 0.9 5 Working temperature 179 179 179 6 Pressure Balance Time 5s(at the pressure of 0.6 ) 5s(at the pressure of 0.6 ) 5s(at the pressure of 0.6 ) 7 Inner Dimension 10001200 12001500 1400 1600