Finger joint panel First of all we would like to introduce ourselves, we are one of the biggest manufacturers, specializing in wooden flooring and wooden panel in Vietnam. Our products are now mainly exported to Japan, Taiwan, Korea... We would like to make a good business with you by offering our products such as floorings, decking, decking tile and wooden panel are made from Laos pine, Vietnam Pine, Acacia, Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk, Oak, Beech, ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door Jamb ( scantling), engineered wood flooring. 1.Wooden flooring: Size: 14/15/18 mm x 90/120/150 mm x 300/450/600/750/900/1050/1200/1500/1820mm A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks. B v Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel. C v Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired. The quality of ABC Grade: KD: 12% Less than 2 mm bending over 1000mm running meter Cupping is not allowed. Tolerance on length: +/- 1 mm Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less ) Wood species: Pyinkado, Narra Padauk, Takkyan, Hinoki, Oak, Laos Pine Packing: Nylon, Carton and Pallet 2.Acacia decking tile Size: 24x500x500 mm ( T x W x L) Size of Lamella : 12x50x500 mm ( T x W x L) Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails. 8-12% kiln dried Quality: 1.Surface quality: - A side is the front v view of the product. B side is the side view of the product. C side is the bottom side view of the product. - Sapwood is not allowed on the A and B side . - Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm. - All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with product¦s color. - No rotten, decay, blue stain, no bowing. Processing quality: - Allowed tolerance for lamellas in width and thickness: +/-0.1mm. - Product¦s surface must be treated with sandpaper, to be clean and clear and polished with oil. - All lamellas must be bevel v edge with radius of 2 mm. Packing: Nylon, Carton and Pallet 3.Decking Size: 20/30x105x2700/3000mm Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner. KD : 25% Wood species: Bangkirai ( Yellow Balau ), Laos Pine Packing: Nylon, Carton and Pallet 4.Pine Finger Joint Panel Size: 18/24/33/36/38x300/610/915/1220x2300/2440/3640/4200 KD: 12% Grade A: No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired. Wood species: Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet 5. Window scantling ( 3 layers ) Size : 72mm x 86mm x 5900/6000mm KD : 12% Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm Wood species : Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet Packing: Nylon, Carton and Pallet
Acacia Finger Joint Panels for making table tops in the kitchen, restaurants, bars, furniture and cabinets,.... The surface is smooth with rustic natural appearance, suitable for any space. Besides, it can be coated with various options of colors to improve the aesthetics of the loook such as honey, espresso, spice,. Acacia Finger Joint Panels are made from solid hardwood which makes the products durable, strong and easy to work. Specifications: Thickness: 15,18,20,25,38 or customize Dimensions: 1220 x 2440 mm or customize Humidity: 10% International standard glue: KR560 - D4 Tolerance: 0.2mm thickness, 2mm width; 5mm length
Professional supplier of Oak FJ Finger jointed panel, Oak EG Edged glued panel, Beech FJ Finger jointed panel, Beech EG Edged glued panel, Rubberwood FJ Finger Jointed panel, Rubberwood EG Edged Glued panel, Pine Finger Jointed Panel, Pine EG Edged Glued panel Get more information
Specification of product: 1. Size: Length is up to 8000mm, Width is up to 1500mm, thickness can be 12mm, 15mm, 18mm, 20mm, 22mm, 27mm and the customized size; 2. Raw material: Oak; 3. Glue: D3,D4. Feature of product: 1. The oak finger jointed board is the Eco jointed board that is the formaldehyde free glulam timber beam. Both faces are sanded well and can be faced with melamine paper or wood veneers. 2. Panels are made from Solid 20-40mm or Customized size wide lamels. Lentgh of Staves are Random Aprox 200-500mm. Grade can be from A to C. 3. Finger Joints: Quality of joints between lamels will totally exclude breakout, gaps, holes and excess glue on A face. 4. The Eco glulam timber beam is stronger ,straighter, more uniform and stable.the bending and bonding strength are 3 timers stronger than solid wood; 5. The board can easily be sawed, sliced, chiseled eye, mortise, fixed nail and so on; 6. It is the ideal materials to replace the solid beam, which can avoid the natural defects of solid lumber such as dead knots and scars split and crossed to enhance its strength, the quality and form. Usage of product: Furniture, construction components, crossbeam, framing, truck board, furniture, flooring, wood stud and packing.
Breakfast bar: 4100 x 650 x 40mm Splashbacks: 3030 x 1210 x 6mm Upstand: 3000 x 100 x 20mm Packing: a strong shrink wrap, corners reinforced, very safe packaging.
We have pine, teak, wenge, oak, beech, zebrano, black walnut, birch, teak, spruce, larch, ash, alder, cherry, chestnut, cedar, maple, mahogany, meranti, merbau, poplar, fir, rubberwood, bamboo, hemlock, elm, ebony, fir etc. Dimensions:1000-5000x620/650/720/960/1200x18/20/30/40mm Stave/lamella width: 20, 40mm, 30-90mm Length of stave: min. 200mm Moisture content/kd: 8 to 12% Standing: grain 180# Glue: d3/d4 Quality:a/a, a/b, b/b, b/c grade Finger joints: quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on top face.Finger jointed blocks, edge glued laminates without biscuits.The finger joints are not visible from the top. Quantity:min order 0.5m3. Each panel will be individually strong shrink-wrapped, and packed on strong pallets.
Weights & Dimensions ASIAN MARKET Length (inch): 96/ 141.7 Width (inch): 48/ 11.8/ 21.6 Thickness (inch): 0.31/ 0.39/ 0.47/ 0.59/ 0.71/ 0.95/ 1.18/ 1.29 / 1.49 EUROPE MARKET Length (millimeter): 3650/ 4500/ 5100/ 5900 Width (millimeter): 650/ 710/ 810/ 1210 Thickness (millimeter): 18/ 22/ 30/ 33/ 40/ 44/ 50/ 56/ 60/ 70 Length (inch): 143.7/ 177.1/ 200.7/ 232.2 Width (inch): 25.5/ 27.9/ 31.8/ 47.6 Thickness (inch): 0.70/ 0.86/ 1.18/ 1.29/ 1.57/ 1.73/ 1.96/ 2.20/ 2.36/ 2.75 Specifications Wood species: Rubberwood Finger Joint Board. Moisture: 8 12 %. Wood Stave (length): 150-400 millimeters. Wood Stave (width): 20-80 millimeters. Length & Width tolerance: 0/+3 millimeters. Thickness tolerance: +/- 0.2 millimeters. Glue: D4. Surface finish: sanding 240-320 grit. Both sides of the wood board. Quality: AA, AB, AC, BC, CC, or customizable. Packing & Delivery o Quantity: 21 22 cbm/20ft o Packing: as normal export standard o Trade terms: FOB, CIF o Payment terms: by TT or at sight irrevocable L/C o Time of starting shipment: 25 - 35 days after receiving L/C or TT o Min order: 1 container x 20ft o Supplying capacity: 200 x 40ft containers About us SSR was founded in 2009, based on the multinational development of production of import and export trade. Realizing the potential in export-import markets of domestic and foreign wood, SSR has expanded the business market and diversed its products to meet customer needs worldwide. Currently, SSR has been building a network of distributor in more than 18 countries worldwide and is constantly expanding. Our products: wood finger jointed laminated board, solid wood panels, table top, plywood, MDF, finished furniture according customer's request, etc.,
FINGER JOINT- EDGE GLUED CLEAR WOOD PANELS - Radiata Pine wood - Thickness 18 and 30 mm - Widths up to 1000 mm - Lengths up to 4 m - Squareness - 120 or 150 grit Sand Paper finished - FSC certified - FOB Ports: Coronel; Lirqun; San Vicente; Talcahuano. Chile. Southamerica
Product: Beech and oak glued edge panels û finger joined, humidity 8+2%, sanding 120 grit, glue D3, width of one lamella 36-45, quality A/A, A/B, A/C, B/B, B/C, C/C Quality:A û side:common standard colour matching, heartwood and sapwood is not allowed, occasionally small healthy eyeknots are allowed. B û side:discoloration and healthy heartwood and sapwood is allowed, small healthy knots are allowed C - side:discoloration and healthy heartwood and black heartwood, sapwood is allowed without limitation, small knots are allowed Dimensions:thickness:from 18 mm up to 55 mm Width:up to 1240 mm Length:up to 6000 mm Packing:according customers requirement Advantages:fixed high quality standard short delivery terms tradition and know-how in wood production strategic location in the middle of Europe wide dimension scale flexibility and customers service 400 x 650 x 4000 mm, 10 pcs., 1,04 m3, 725 Kg
Oak, wenge, iroko, zebrano, black walnut, beech, birch, pine, teak, spruce, larch, fir, ebony, elm, ash, sapele, alder, cherry, chestnut, cedar, maple, mahogany, meranti, merbau, hemlock, poplar, rubberwood, bamboo, etc. Dimensions:1000-5000x620/650/720/960/1200x18/20/30/40mm Stave/lamella width: 20, 40mm, 30-90mm Length of stave: min. 200mm Moisture content/kd: 8 to 12% Standing: grain 180# Glue: d3/d4 Quality:a/a, a/b, b/b, b/c grade Finger joints: quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on top face.Finger jointed blocks, edge glued laminates without biscuits.The finger joints are not visible from the top. Quantity:min order 0.5m3. Each panel will be individually strong shrink-wrapped, and packed on strong pallets.
