Supplier: Phosphoric acid, soda ash
Services: Shipping
Buyer: Phosphoric acid , soda ash
Cruise vessels stainless steel marine ship anchor sea anchor boat accessories Welcome to check specialized in casting processing with various surface treatment. We produce marine supply, glass hardware, machined parts, mechanical products, pumps, valves and other customized casting part. Casting materials mainly include stainless steel, carbon steel, alloy steel. Just send us your CAD or 3D drawing to get the one-stop tailor made service. Architectural hardware: glass fitting, glass hardware, staircase, handrail, glass fence, pool fence, railing, glass railing, balcony railing, balustrade, glass spigot, glass clamp, glass standoff, glass spider, pipe fitting, hinge, etc. Marine hardware: marine supply, marine hardware, marine accessory, boat accessories, boat accessory, marine accessories, marine fittings, includes anchor, cleat, bollard, drinking cup holder, fishing rod holder, hinge, base, hasp, lift handle, lock, ladder, fuel filler, air vent, deck plate, drain cover, row lock, etc. Investment casting: casting, castings, casting part, casting parts, sand casting, aluminium casting, steel casting, precision casting, carbon steel casting, lost wax casting, stainless steel casting, etc. Like wall mount bottle opener, and other kitchen tool.
Supplier: Pdo threads, plla thread, pcl thread, hyaluronic acid filler, micro cannula
Services: Trade , shipping
Supplier: Dermal filler, hyaluronic acid, gel, meso pen, cosmetics, cross linked dermal filler, hyaluronic acid power
Services: Shippment
Buyer: Dermal filler, hyaluronic acid, gel, meso pen, cosmetics, cross linked dermal filler, hyaluronic acid power
Supplier: Raw Materials Like Favipiravir (CAS No.:259793-96-9), Oseltamivir phosphate (CAS No.: 204255-11-8), Meta Xylenol (CAS No.:88-04-0), 3-Amino-3-Azabicyclo(3,3,0)octane HCl (CAS No.:58108-05-7), Triclosan (CAS No.: 3380-34-5), GS-441524/Remdesivir (CAS:1191237-69-0), L-5-Methyltetrahydrofolicacid (CAS No.:31690-09-2 ), Hyaluronic Acid 99% (CAS No.: 9004-61-9), Florfenicol 98% CAS No.: 73231-34-2, Tilmicosin 99% CAS No.: 137330-13-3
Services: Shipment
Material:304 316 316L stainless steel,FeCrAl,Monel ,nickel ect. Size:1000500mm 1000600mm 10001000mm 12001000mm 15001200mm Feature: 1. Large capacity of pollutants, high filtration, slow pressure rise, long replacement period; 2. High porosity and excellent permeability, low pressure loss, large flow; 3. Corrosion-resistant, high temperature: acid, alkali, organic solvents, drugs and other corrosion, 4. Easy processing, molding, welding; Application: Stainless steel sintered felt has excellent filtration performance, is the ideal high temperature, corrosion resistance, high precision filter material. Widely used in polymer polymer filtration, petrochemical, electronic high temperature gas dust, oil refining process filtration, viscose filtration, ultrafiltration filter, vacuum pump protection filter, filter support, catalyst carrier, car airbags, Aircraft ships and other fuel filtration, hydraulic system filtration.
PTFE GASKET IDEAL GASKET SOLUTION FOR HIGHER BOLT LOADS EQUIPMENT. PTFE Gasket is made of synthetic fluoropolymer of tetrafluoroethylene. It has highly resistant to chemicals, solvents, caustics and acids, except for alkali metals and fluorine gas. In addition, PTFE also has a very low surface energy and conforms to FDA regulations. PTFE gasket provides excellent sealing performance in corrosive environments. It can be used as flange gasket in the chemical industry, machine and equipment industry and piping. COMMON SPECIFICATIONS Item Thickness (mm) Inner Diameter (mm) Outer Diameter (mm) PG-01 0.820 22 47.5 PG-02 34 66.5 PG-03 43 76 PG-04 49 85.5 PG-05 61 104.5 PG-06 73 124 PG-07 273 339.5 PG-08 324 409.5 PG-09 407 514 PG-10 508 606.5 FEATURES Excellent sealing at high temperatures and pressures. Non-corrosive, non-wetting, non-contaminating and odourless. Excellent electrical and thermal insulation in virgin PTFE form. Excellent chemical and mechanical resistance. Very low gas leakage (complies with German Fugitive Emission Regulation TA-Luft). Minimized cold-flow and creep behaviour. Ideal for aggressive chemicals. Long service life. Easy to handle and cut. MATERIALS TYPES Virgin Teflon gaskets. Virgin Teflon gaskets are produced directly from pure material. They are used in the majority of general applications due to the most cost-effective type of PTFE material and possessing the greatest physical and electrical insulation properties. Filled Teflon gaskets. Filled Teflon gaskets are made from virgin PTFE material with an added substance to improve their sealing properties. The gaskets materials exhibit strong physical characteristics, the strength can be altered depending on the type of filler that is used to enhance the material. Expanded Teflon gaskets. Expanded Teflon gaskets are produced through virgin PTFE being expanded in a manner that creats uniform tension strength across the material. This process results in a PTFE material that carries no structural weakness and more flexible. They also exhibit the unique chemical resistant properties of virgin PTFE due to the fact that no additives are added. Three white virgin teflon gaskets on a ivory color background. Virgin teflon gaskets Some filled teflon gaskets with different sizes on a black background. Filled teflon gaskets Some expanded gaskets on a gray background. Expanded teflon gaskets
Features: 1, This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material 2, The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3, Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface 4, Excellent flexibility, can bear the bonding layer stretch that caused by temperature 5, Good anti-infiltration function 6, No need to wet the brick wall, effectively improve the efficiency. Surface Treatment: 1, The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. 2, For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction. Operation process: 1, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2 2, Push the ceramic tile or heavy type ceramic tile above it 3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material 4, Can be used for the old ceramic tile re-tread. Cautions: 1, Never mix the dry slurry with water and use again 2, For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation 3, For the painting surface, make sure the initial bond strength and no flake 4, Operating under 5¡æ~40¡æ situation 5, Clean the surface by little wet sponge or cloth before it dry 6, Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler. Technical Reference: Coverage area(amount) Technical reference using 3*3mm tooth scraper about 1.7kg/m2 1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust) using 6*6mm tooth scraper about 3.0kg/m2 2, cool time: about 10min (cool time: the longest cool time that the adhesive can last ) using 10*10mm tooth scraper about 4.5kg/m2 3, dry time: 24h (according to the weather) 4, water resistance: excellent; non-toxic, prevent fire the smoother the surface, the less amount 5, when dry, anti-weak acid, anti-strong alkali and oil resistance 6, cut degree: £¾1.2MPa (14days later). Store Method: Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Features: 1. This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material 2. The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3. Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface 4. Excellent flexibility, can bear the bonding layer stretch that caused by temperature 5. Good anti-infiltration function 6. No need to wet the brick wall, effectively improve the efficiency. Surface Treatment: 1. The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. 2. For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction. Operation Process: 1. Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2 2. Push the ceramic tile or heavy type ceramic tile above it 3. For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Cautions: 1. Never mix the dry slurry with water and use again 2. For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation 3.For the painting surface, make sure the initial bond strength and no flake 4.Operating under 5¡æ~40¡æ situation 5.Clean the surface by little wet sponge or cloth before it dry 6.Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler. Technical Reference: Coverage area(amount). using 3*3mm tooth scraper about 1.7kg/m2. using 6*6mm tooth scraper about 3.0kg/m2. using 10*10mm tooth scraper about 4.5kg/m2. Technical reference: 1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust) 2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last ) 3, Dry time: 24h (according to the weather) 4, Water resistance: excellent; non-toxic, prevent firethe smoother the surface, the less amount 5, When dry, anti-weak acid, anti-strong alkali and oil resistance 6, Cut degree: £¾1.2MPa (14days later). Store Method:Store in cool and dry place, unopened product can be saved for one year. 25kg/bag.
