Pet.Coke dry powder combustion system. Water content ¡â2.0% Finess:200mesh¡ã100% Ii) Pet.Coke powder consumption:28t/d Iii) Requirements for compressed air:0.7mpa, 10m©ø/min Dry compressed air:0.7mpa, flow rate 10m©ø/min(stable pressure and flow rate) Iv)15 kw power:service power 15kw
Borosilicate glass process equipments Our products are as follows: - Glass components 1.Spherical vessels up to 300 ltr. 2.Cylindrical vessel up to 400 ltr. 3.Pipe component up to 600 dn. 4.Heat exchanger coil type up to 600dn 5.Shell & tube type heat exchanger up to 600 dn. 6.Glass valve up to 150 dn 7.Jacketed glass reactors upto 100 ltr capacity Standard assemblies 1.Distillation assemblies over glr (glass line reactor) 2.Standard units viz. Reaction, fractional distillation & reaction distillation units.Upto 300 ltr. Capacity Designs with supply 1.Absorption systems for gases e.G. Hcl, cl2, so2, hbr, nh3, h2s etc. 2.Anhydrous hcl gas generator. 3.Shell & tube heat exchanger 4.Sodium hypochlorite production unit. 5.Sulphuric acid dilution unit. 6.Solvent recovery / continuous distillation unit. 7.Rotary evaporator. Know how with plant 1.Bromine recovery. 2.Nitric acid concentration. 3.Sulphuric acid concentration. Pollution abatement packages with saleable by products 1. Emission/dischargeby product 2. - hcl (gas)commercial hydrochloric acid 3. - cl2 (gas)sodium hypo chlorite solution 4. - so2 (gas)sodium sulfite/ sodium bisulfite solution 5. - inorganic bromidesliquid bromine 6. - hbr (gas)commercial hydrobromic acid 7. -h2s (gas) sodium sulfide/ sodium bisulfide solution 8. - bromine (vapour)liquid bromine Full range of ptfe teflon product & laboratory glassware. We now looking forward to get an opportunity to serve your esteemed organization & country and awaiting your valued inquiries. Assure you of our best of services at all times.
Tempered Glass Quality Testing Equipment Function: Determining the resistance of glazing material to impact by the penetration method. Principle: The specimen is supported vertically in a steel frame and an impact shot bag is released from a pre-determined height to strike the specimen at the centre. The height is progressively increased until fracture occurs. Related Standards: AS/NZS 2208 Safety glazing materials in buildings Appendix D: Impact Test GB 15763.3 Safety glazing materials in building Part 3: Laminated glass Appendix C: Test device for the impact performance of shot bag ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.1: Impact Test Apparatus: 1) Impact testing frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 2) Impact shot bag: Weight: 45kg ±0.1kg 46kg ±0.1kg Height: 330mm ± 13mm Max diameter: 250mm Leather thickness: 1.5mm Lead sand size: 2.5mm Customized: 25kg /48kg
Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Impact Shot Bag: Reinforced leather bag filled with chiller lead shot
Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Impact Shot Bag: Reinforced leather bag filled with chiller lead shot
As per ISI and BS Standard Standard lot size
The distance between the foot line of l-shaped wall and top surface of sidewall is short, which allows thinner batch feeding so that the batch can be melted more easily. It can also reduce fire and batch running at the charge end and hence energy can be saved and environment improved.With its high reliability and long service life span, the l-shaped suspended back wall serves as one of the essential measures for prolonging the whole furnace life. Main technical index: 1. Modulus width of suspended wall: 300mm; 2. Width of brick structure: 380mm; 3. Length of nose zone (doghouse): 1700-2300mm; 4. Service life: more than 10 years.
Tempered Glass Impact Strength Test Equipment Function: Determining the resistance of glazing material to impact by the penetration method. Principle: The specimen is supported vertically in a steel frame and an impact shot bag is released from a pre-determined height to strike the specimen at the centre. The height is progressively increased until fracture occurs. Related Standards: AS/NZS 2208 Safety glazing materials in buildings â?? Appendix D: Impact Test GB 15763.3 Safety glazing materials in building Part 3: Laminated glass â?? Appendix C: Test device for the impact performance of shot bag ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.1: Impact Test Apparatus: 1) Impact testing frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 2) Impact shot bag: Weight: 45kg�±0.1kg 46kg�±0.1kg Height: 330mm �± 13mm Max diameter: 250mm Leather thickness: 1.5mm Lead sand size: 2.5mm Customized: 25kg /48kg
The top roller installed at the both sides of the tin bath can effectively control the width and thickness of the gross glass ribbon. The main technical index: 1. The thickness of glass sheet:1.0-25mm 2. The horizontal oscillative angle of head: 3. The accuracy of head's oscillative angle: 4. The speed of rotating coil of head: 10-1500m/h 5. The accuracy of coil-speed of head: 0.01% 6. The radial direction run-out should be no more than 0.2mm 7. The accuracy of head's pressed-depth: 0.1mm 8. The biggest depth for head (inside the bath): 2000mm 9. The longest distance of machine frame for lifting up and down: 100mm 10. The accuracy of machine frame for lifting up and down: 0.1mm 11. All the above index can be customer-designed.
Used in float glass and ultra clear patterned glass production line, it includes the shell of the annealing lehr, transmission, hot air circulation system, electric heating system and control system. The main technical index: 1. Suitable for gross ribbon width: 2000mm-5400mm; 2. Suitable for gross ribbon thickness: 1.5mm-20mm; 3. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365mm.
