Laser cutting (84561000)
Yq-n1390 co2 laser cutting machine features and advantages 1. Import hiwin linear square guide and high quality belts 2. High quality square tube welding frame with heat treatment, stable and durable, long life span 3. Speedy offline control system, support usb output directly, english interface, easy to operate 4. Three phase stepper motors and drivers (servo optional), which make sure machine work high speed and high precision 5. Support autocad, coreldraw output directly 6. Separate design availiable---machine can be dismantled to three parts, which is easy to put into narrow workplace. 7. Material can have a material pass thru unlimitedly 8. Closed design, make sure all smokes can be absorbed outside. Yq-n1390 laser cutting machine technical parameter Laser model: yq-n1390 Working area: 1300x900mm Laser type: hermetic and detached co2 glass laser tube Laser power : 60 / 80 / 100/ 130w/150w/260w Cooling way :water cooling and protection system Laser energy control : 0~100% set by software Location accuracy: ±0.01mm Engraving speed: 1000mm/s Cutting speed: 500mm/s Control system: speedy dsp , support u-disk output directly Supporting format: cdr, bmp, plt, dxf, ai, dst Software support: support autocad, coreldraw, photoshop, etc. Operating environment: windows98/2000/xp/win7/8, vista Working voltage: ac220v/50hz or ac110v/60hz Min.Shaping character: letter: 1mm*1mm Running environment: temperature:0-45°, humidity: 5%-95% Gross power:
Fucntions of fiber laser cutting machine 1. high quality Excellent laser beam quality: Smaller laser dot and high work efficiency. 2. China Plate Laser Cutting Machine High cutting speed: cutting speed is 2-3 times than same power CO2 laser cutting machine. 3. High efficiency for photoelectric conversion: Compare with Acrylic CO2 Laser Cutting Machine, fiber laser cutting machine have three times photoelectric conversion efficiency. 4. Low cost, save energy and protect environment. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine. 5. Continuous laser welding machine Low maintenance: fiber line transmission no need reflect lens, save maintenance cost; 6. Easy operations: fiber optical transmission, no adjustment of optical path. Advantages of fiber laser cutting machine 1. Adopted to import fiber laser generator, with long using life up to 100000 hours and high cutting speed up to 80m/min; 2. Hand-held Laser Cleaning Machine make sure the cutting high precision especially comparing with the single driver system. 3. laser head with auto focusing height follower, which can ensure the constant same distance between the head and cutting material.
Fiber Laser Cutting Machine With Rotary And Exchange Table MTF3015JR pipe laser cutting machine custom CNC Fiber Laser Cutting Machine Features Tube welding ot integrated casting machine body: higher stability for higher precision Raycus fiber lasers,high and stable function,lifespan is over 100000 hours Perfect cooling system, lubrication system and dust removal system:make sure the machine can operate stably,efficiently and durably. A specialized CAD / CAM automatic programming software and automatic nesting software: it is possible to maximally save raw materials. High Efficiency for photoelectric conversion: Compare with CO2 laser cutting machine, fiber laser cutting machine have three times photoelectric conversion efficiency. Low Cost: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine. Low Maintenance: fiber line transmission no need reflect lens, save maintenance cost; Easy Operations: fiber line transmission, no adjustment of optical path. Tube choose : 3m or 6m tube you can choose. laser cutting machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. Our tube laser cutting has many advantages such as high efficiency for photoelectric conversion, low cost, low maintenance and easy operations. MYST supply laser cutting machine, which include sheet & tube laser cutting machine and sheet metal fiber laser cutting machine. If your job is complicated, you can contact us and we will provide you with the best solution!
General type 40W60W80W MYJG CO2 laser power supply myjg-40/60/80watt laser power source 1. Product Features: It has green color control signal terminal board 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5V analog signal or PWM signal. 4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified. 3. Specification: Item MYJG-40 MYJG-60 MYJG-80 MYJG-100 MYJG-130 MYJG-150 30KV 35KV 45KV 50KV 50KV 50KV 20mA 23mA 30mA 30mA 35mA 38mA Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Efficiency 91% Over Current Protection 130% of Max. Current Open Circuit Protection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH)171mmx161mmx91mm Note Power supply warranty:12 months. Delivery time:2 working days after payment received. Package:Carton,foam and wooden box. Shipping method:DHL,UPS,Fedex or TNT Payment method: T/T,PAYPAL,Western Union Application:General type power supply and widely used on 40W-150W CO2 laser engraving machine.or cutting machine
BR-60W CO2 POWER SUPPLIES Feature 1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power. 2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.� It is very good function for both machine factory and machine users 3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case. 4.This LCD screen CO2� power supply� has� high efficiency and� quick� response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.� 5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not. 6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time. 6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube. Specification lnput� Input voltage AC220V�±10%� (AC110V specified while order) AC frequency 47~440HZ Maximum input power 490W Maximum input current 2.2A Output Maximum output voltage 25KV Maximum output current 28mA (depending� on the laser tubes of different manufacturers) Efficiency More than 90%� (Full load) Response speed Not more than 1ms Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) Environmental Requested Working temperature -10â??~50â?? Storage of temperature -20â??~75â?? Relative Humidity Maximum 85%RH (non-condensing) Altitude 100,000 feet of work 200,000 feet of storage,dose not work Cooling methods Forced air cooling (fan cooling) Dimensions (LxWxH) 210mmx145mmx102mm
Fiber Laser Cutting Machine With Rotary Exchange Table and Cover MTF3015GR custom Laser cutting machine manufacturer CNC Fiber Laser Cutting Machine Features Cover : more environmental safety for operator Tube choose : 3meter or 6meter tube you can choose Tube welding ot integrated casting machine body: higher stability for higher precision Raycus fiber lasers,high and stable function,lifespan is over 100000 hours Perfect cooling system, lubrication system and dust removal system:make sure the machine can operate stably,efficiently and durably. A specialized CAD / CAM automatic programming software and automatic nesting software: it is possible to maximally save raw materials. High Efficiency for photoelectric conversion:Compare with CO2 laser cutting machine, fiber laser cutting machine have three times photoelectric conversion efficiency. Low Cost: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine. Low Maintenance: fiber line transmission no need reflect lens, save maintenance cost; Easy Operations: fiber line transmission, no adjustment of optical path. Tube choose : 3meter or 6meter tube you can choose. Sheet & Tube Laser Cutting Machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. MYST supply laser cutting machine, which include sheet & tube laser cutting machine and sheet metal fiber laser cutting machine. If your job is complicated, you can contact us and we will provide you with the best solution! For more information on small laser cutter, please click here to browse our website.
6040 co2 laser engraving machine 40w 4060 co2 laser engraver Features This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry. Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube Features: 1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube. 2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal. 4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst. 5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 40KV Max. Output Current 28mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open circuitProtection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) � Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 270x160x80mm
Dy-10/dy-13/dy-20 80/100/150w laser power supply for reci 1200/1400/1650/1850mm co2 tube Dy-10:80w co2 laser power supply for reci s2 80-90w co2 tube Dy-13:100w co2 laser power supply for reci s4 1000w co2 tube Dy-20:150w co2 laser power supply for reci s6 or s8 130-150w co2 tube 1. Product features: 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with co2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to high or low level signal. The ttl level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5v analog signal or pwm signal. 4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function canprotec power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 3. Specification: Model nody-10dy-13dy-20 Output laser power80-90w100w130-150w Input ac voltageac220v or ac110v
