Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
These are used in oil and gas drilling industries and other industries also. Types - Oxygen Scavenger Biocide (Amine) Biocide (Aldehyte) Zinc Carbonate For price and specification, please contact us
We are exporter of Arabic Gum Or (Acacia Gum). Organic Gum Arabic (Acacia) is an emulsifier for flavor oils and essential oils, making them stable in water-based compounds. A 30/70 ratio of gum to water is recommended as the best starting point for a Gum Arabic solution. It can be mixed at a 6/1 ratio of gum to oil. It can be used in cosmetics, baking, and as a fiber supplement. Organic Gum Arabic (Acacia) is vegan, kosher, and gluten-free. The Sudanese Organic Gum Arabic Acacia Senegal Heshab is the best in quality all over the world.
We deals in the following Chemicals :- Flitrate Reducer for Oil & Mud Base Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Introduction to the product CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system. Method of use The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.
During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade. Guar has now assumed a larger role among the domesticated plants due to its unique functional properties. India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds. Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average. Composition is: Hydrocolloid: 23% Fats: 40% Proteins: 34% The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.
Roasted Guar Korma has been developed as a product free of antinutritive factors with balanced Amino Acid Profile. Suitable for Poultry, Swine, Ruminant and Aquaculture. Processed with heat and steam, inactivates harmful trypsin inhibitor which indirectly enhances protein and Amino acids digestibility in the product resulting in increased productivity of livestock and poultry. This process also reduces gummy substance by hydrolysing glactomannan and heat breaks cell walls resulting in higher digestibility of Guar Korma. The anti-nutritive trypsin inhibitor is present in both Soybean and Guar seed, but gets inactive when processed into Soybean meal and Guar meal respectively. We have two qualities of Roasted Guar Korma namely ULTRA and PREMIUM In Roasted Guar Korma ULTRA, the minimum protein content is 48 % and in Roasted Guar Korma PREMIUM, the minimum protein content is 55 %. The other nutritional and Amino Acid values of ULTRA and PREMIUM Roasted Guar Korma are listed below:- • Higher percentage of Crude Protein (CP) • Free From Aflatoxins • Higher Digestibility Index, due to the removal of anti-nutritive factors • More desirable and balanced Amino acid Profile • Higher Energy content and fat percentage • Lower percentage of less digestible Fibre • Higher Palatability, complete elimination of characteristic bean odour and taste. • Low content of Total Volatile Nitrogen (TVN) • Free flowing, uniform fine particle size with good fat and water binding ability NUTRITIONAL VALUES ULTRA PREMIUM Protein 48% – 50% 55% – 60% Metabolize Energy 2550 KCal/Kg 2700 KCal/Kg Moisture Less Than 8% Less Than 6% Fiber 6% – 8% 4% – 5% Fat 5.00% 5.00% Ash/ Sand Silica Less Than 2% Less Than 1% Calcium 0.55% 0.55% Phosphorus 0.68% 0.68% Available Phosphorus 0.19% 0.19% Urease Activity Less Than 1% Less Than 1% Pepsin Digestibility 85.00% 85.00% Trypsin Inhibitor Less Than 1 Less Than 1 Aflatoxins NIL NIL Salmonella NIL NIL E.Coli NIL NIL