Welding Machine
Supplier: Welding rod, welding electrodes, welding wire, flux cored welding wire
Product Description Buy Product - 3.15 mm x 450 mm Buy E6013 Welding Rod At Royal Welding Wires The E6013 welding rod is a professional-grade welding rod designed for use in welds up to 2 inches in diameter. It is made of high-quality, alloys that are guaranteed to provide consistent and accurate welds.
1. Welding Wire for flux welding OE SD3 1NI 1/2 MO - (Air Liquide)-(2,4mm) - 316260kg 2. Welding Wire OK ARISTROD 13.08 - (ESAB) - (1mm) - 93060kg 3. Welding Wire OK AUTROD 12.66 - (ESAB) - (1mm) - 143265kg 4. Welding Wire (Hollow) with flux filling OK TUBROD 15.19 - (ESAB) - (1,2mm) - 3180kg 5. Welding Wire for flux welding OE TIBOR 33 - (Air Liquide) - (3,2mm) - 13108kg 6. Welding Electrode P 65 MR - (Air Liquide) - (3,2mm) - 270kg 7. Flux OP 132 - (Oerlikon) - 539425kg 8. Abrasive Grit - (Winoa) - 82725kg
1. Specification conformance Aws a5.20 e71t-1 gb/t10045-2001 e501t-1 / jis z3313 / yfw c50dr 2.Description Aws a5.20e71t-1 is a kind of ti type flux cored wire for co2 welding , it has high cladding efficiency, good welding technical performance in all-position welding, apply for low carbon steel and 500mpa grade strength steel welding, such as ships, pressure vessels, mechanical equipments and bridges. 3. Chemical composition of deposited metal (%) C161;¨¹0.18, mn161;¨¹1.75, si161;¨¹0.90, p161;¨¹0.03, s161;¨¹0.03, cr161;¨¹0.20, ni161;¨¹0.50, mo161;¨¹0.30, v161;¨¹0.08, cu161;¨¹0.35 4.Mechanical properties of deposited metal Yield point480 mpa, tensilestrength400 mpa, Elongation22%, test temp -20161;227;c, impact energy 27 j 5. Available diameter 0.8mm/0.9mm/1.0mm/1.2mm/1.4mm/1.6mm
Detailed product description of flux cored welding wire: Features: flux cored welding wire is available for both mild steel and stainless steel gas metal arc welding. A flux cored welding wire is a tubular wire with a metallic powder flux inside. The primary advantage to flux cored welding wire over gmaw or stick welding is higher deposition rates, deeper penetration, improved bead appearance and is more cost effective Packing: 15kg/vacuum aluminum foil bag Certificates: abs ccs dnv lr gl kr nk, iso9001:2000, and so on; Specification: 1.0mm, 1.2mm, 1.6mm. Packing:5kg, 10kg, 15kg or 20kg packed in plastic spool;5kg, 15kg in iron wire spool; 250kg and 350kg in drum. Packing: black good plastic spool, precisely winding, with water-proof paper, wrapped by plastic film and silica gel, and then a white neutral carton box, at last by pallet;
The flux-cored welding wire is intended to inert-gas shielded fusion welding of titanium and its alloys and includes a metal coating or tubular casting of titanium or its alloys and a powder flux core containing (per cent by weight): Baf2 -- 5 to 10, Fluoride of a rare-earth element -- 18 to 20, Caf2 -- 40 to 50, Srf2 -- the rest, The ratio of the weight content of the powder flux to the total weight content of titanium in the wire being from 0.3: 1 to 1: 1.
Nova supply and distribute Flux cored welding wire commonly used for steel structure construction, shipyard, offshore facilities, bridge construction, and automobile manufacturing.
Flux-cored welding wire is suitable to work in all positions with stable arc less splash, less welding smoke, shaped good appearance, high welding efficiency, inherent quality stable and reliable, good mechanical property of deposited metal. Suitable for welding key structure steel made of low carbon steel and low-allow steel, specially suitable for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery
