Brief introduction Rock wool is a kind of vitreous fiber that gets from slag, basalt, limestone and dolomite through fusion and fiber forming technique. It has good thermal and sound insulation property and widely used in building industry, chemical field, textile industry and many other fields. Equipment introduction Melting system This production line could adopt tank furnace or cupola furnace according to different production condition. They could ensure reliable melting performance and continuous operation. Fiber forming system The main equipment in this system is the four-roller centrifuge. It could transform the high temperature lava into thin fiber with the centrifugal force produced by the high rotating rollers. Wool collecting system This system could collect fiber under the negative pressure of the air-intake fan and allocate the raw blanket stably and equably to form multi-layer blanket. Wool allocating machine It could allocate and convey the raw blanket from the pendulum and also act as the transition part to connect each production process. Compression pleating machine It will prepress the blanket and then send it into curing oven. It could improve the strength and tearing force of rock wool and also reduce the burden of the curing oven. Curing oven It could cure and shape the rock wool to form rock wool board or blanket with certain density and width. Cooling conveyor Its function is to make the product cool and convey the product to the next process. Cutting system It could proceed longitudinal and crossing cutting to make required products. Packing machine The packing machine is used to pack the rock wool board with one layer of shrinkage film, in order to facilitate the transportation and loading. PE film, Container
Brief introduction Glass wool is a kind of insulation materials which is made of natural ores, such as quartzite, dolomite, feldspar, limestone and so on. With the features of low density, fireproof, thermal insulation, the glass wool has found a wide utilization in the fields of petrochemical industry, architecture, etc. The capacity of the glass wool production line is 2000-20000 tons per year. The raw material is cullet, feldspar, dolomite, calcined soda, borax, limestone, others. The fuel could natural gas or heavy oil, etc. Production process The glass wool production line is a complete set of machinery. The raw materials added with auxiliary agents such as calcined soda and borax are melted into glass fluid in the tank furnace. The lava is drawn, blown or thrown into very thin fibers under centrifugal force of the spinner. The forming fiber will be collected to be original blanket by wool collecting machine. The original felt is sent into the curing oven to be solidified and shaped by the conveyor. After curing, the products will go through the cooling section. It will be cut by slitting cutter and cross cutter according to the setting length. Finally, it will become the final products such as board, blanket. We could provide a series of service including the project consultancy, technical support, installation and commission, employees training, system maintenance, technology upgrade, etc. we warmly welcome you to visit our company. Equipment introduction Melting system This production line adopts tank furnace which is made up of different refractory materials and uses natural gas as fuel. Fiber forming system Centrifuge could produce glass wool fiber from vitreous fluid. It is the key equipment of the whole production line and decides the quality of the final product. Glass wool collector Glass wool collector could collect fibers into crude felt which is then sent to curing oven via the transition conveyor. Curing oven Curing oven could heat and shape glass wool layers containing binder as per the density, size required for products. It could make binder and fibers polymerize into one, producing glass wool blanket and board. Conveying and cutting machines The conveying machine could convey the cured glass wool products to the cutting system and cool the products at the same time. The cutting system could proceed longitudinal and crossing cutting to make required products. Blanket / felt-rolling machine It could roll the glass wool blanket into rolls and facilitate the packing of product. PE film, Container
Brief introduction Ceramic Fiber, also called aluminum silicate fiber, it is a kind of light weight refractory fiber. It possesses the performances and advantages of high temperature resistance, light, excellent thermal stability, low heat conductivity, small thermal capacitance and mechanical vibration resistance etc. The ceramic fiber needled blanket is the main products of ceramic fiber, it has higher tensile strength and other excellent features. As refractory material, it has found an increasingly wide utilization in the fields of in metallurgy, cement, glass industry, etc. Production process The complete ceramic fiber production line adopts electrical resistance furnace to melt the raw material (such as calcined kaolin clay, alumina, silica, zirconia, etc) into lava. Then the three-roller centrifuge will attenuate the molten fluid into fibers under the centrifugal force of the high speed rotational rollers to the lava. The crude blankets are formed in the collecting chamber and then carried out from the setting chamber. After going through the allocating conveyor, the crude blankets enter into the sintering furnace to be cured. Then the double-layer needling machine will needle the blanket to make the fiber layer tightly interweave with each other. Then after longitudinal and cross cutting, rolling, the crude blankets will become the needled blanket. Equipment Introduction Melting system The electric resistance furnace could use the current generated between the electric resistances to melt the raw materials. Fiber forming system The fiber forming machine is three-roller centrifuge. The high temperature melting fluid will be dispersed and stretched into thin fibers by the centrifugal force of high speed roller. Wool collector The wool collector is used to collect the fibers into crude blanket. The fibers are evenly drawn on the mesh belt under the function of negative pressure air and become crude blanket. Needling machine Needling blanket is developed from the non-woven needling technique. The needle hooks move up and down and draw the fibers to make the fiber layer tightly interweave with each other. This process could improve the tensile strength and the wind erosion resistance performance of the blanket. Sintering furnace It could burn off the lubricant in the blanket and make fiber microcrystalline processing to achieve the heat shaping of the blanket and reach the required thickness and dimension. Cutting and rolling system This system is used to finish the cutting and rolling of the blankets. The blankets will be cut into pieces or strips and rolled into rolls according to the proceeding requirement. PE film, Container
Supplier: Rock wool product, glass wool product , ceramic fiber product and alumina cement
Buyer:
Supplier: Refractory insulating material, calcium silicate board, ceramic fiber products, rock wool products, glass wool products
Services:
For thermal and acoustic insulation, available with or without AI.foil. Idea for under deck Insulation, over the false ceiling and for Ducting. Size: Rolls in standard width of 1.2 m Density: 16, 24, 32 & 48Kg/m3 Thickness : 25, 50mm Aslo R.P.Tissue and Rigid Boards etc., Glass wool Insulation is one of the most widely used forms of insulations world-wide because of its thermal and acoustic properties, light weight, high tensile strength and exceptional resilience. Glass wool is one of the most dominant types of insulations preferred in applications with service temperatures ranging upto 250C. Glass wool consist of fine, long, inorganic fibers bonded together by high temperature binder. These fibers (each of approx. 6 - 7 microns diameter) are distributed to trap millions of tiny pockets of air in it thereby creating it an excellent thermal and acoustic insulation. The light weight of Glass wool also offers significant advantages during transport and installation. In addition, Glass wool is chemically inert and has no impurities such as iron shots, sulphur and chloride. The product is non corrosive to metal and does not support mold grow. It is manufactured from renewable raw materials and is environmental friendly in every stage. Glass wool is formed into products with various thickness and densities. It comes in the form of rolls and slabs with or without Aluminum foil Paper. Types of facings: Aluminum Foil, Black Glass Tissue, Glass Cloth. Product Range: Density 12 Kg/Cubic m to 100 Kg/Cubic m and thickness 12mm to 100mm
For thermal and acoustic insulation, available with or without AI.foil. Idea for under deck Insulation, over the false ceiling and for Ducting. Size: Rolls in standard width of 1.2 m Density: 16, 24, 32 & 48Kg/m3 Thickness : 25, 50mm Aslo R.P.Tissue and Rigid Boards etc., Glass wool Insulation is one of the most widely used forms of insulations world-wide because of its thermal and acoustic properties, light weight, high tensile strength and exceptional resilience. Glass wool is one of the most dominant types of insulations preferred in applications with service temperatures ranging upto 250C. Glass wool consist of fine, long, inorganic fibers bonded together by high temperature binder. These fibers (each of approx. 6 - 7 microns diameter) are distributed to trap millions of tiny pockets of air in it thereby creating it an excellent thermal and acoustic insulation. The light weight of Glass wool also offers significant advantages during transport and installation. In addition, Glass wool is chemically inert and has no impurities such as iron shots, sulphur and chloride. The product is non corrosive to metal and does not support mold grow. It is manufactured from renewable raw materials and is environmental friendly in every stage. Glass wool is formed into products with various thickness and densities. It comes in the form of rolls and slabs with or without Aluminum foil Paper. Types of facings: Aluminum Foil, Black Glass Tissue, Glass Cloth. Product Range: Density 12 Kg/Cubic m to 100 Kg/Cubic m and thickness 12mm to 100mm
1.Descripation Owing to glass wool's good permformances, e.G., thin and long inner fiber, low thermalconductivity, it can stop air flowing and heat transforming .Meanwhile, it can quickly reduce the transportation of sound to make effect of insulation and sound absorpition.Certrifugal glass wool blanket was the best material used for the insulation and sound absorption of steel structures.It mainly includes bare blanket and blanket with foil-clad covered.They are widely used in industrial plants, warehouses, public facilities, exhibition centers, cold stores and a variety of indoor playrounds, Slag inclusion content%¡ü0.3gb/t 5480.5 Plastic bags
Rocks glass made in Mexican handblown glass in solid amber color
