Termisolve B PRO is unique and effective anti termite chemical. Many anti termite chemicals contain poisons. Termisolve B-PRO contains solvents and inorganic boric salts along with traditional herbal extracts which are known as anti termite since a long time. In a nutshell it is a combination of modern chemistry and proven knowledge of our ancestors. Salient features: Termisolve B PRO is applied as a treatment to the surroundings of existing buildings to prevent and correct termite problems. Termisolve B PRO is ideal for pre and post constructed buildings Anti termite treatment of structures Anti termite treatment for timber structures and wood. Termisolve B PRO is ideal barrier between termites and the building. Termisolve B PRO can be used by following ways. Treatment at the foundation level. Treatment to top surface at plinth level. Treatment of soil at wall and floor junction. 10,20,50,05,200 Liters packing.
Product overview This product is combined naphthalene high efficiency water reducing elements with several types of accelerating and anti-freezing components. It is mainly applied in pumping concrete manufactured in winter constructions. This product meets GB8076 and JC473 first-class standard. Benefits Efficiently decrease the freezing point of free water in concrete Accelerate the hydration of concrete in cold weather; enhance the early stage strength of concrete and anti-freezing ability Improve the flow ability workability and pumpability of concrete Small rate of slump loss, no segregation, no bleeding Improve the strength of concrete in every state and increase the duration after hardening. Improve impermeability, anti-freezing ability and durability Low level of alkalis, no corrosion to the steel structures Areas of Application All types of pumping concrete and commercial concrete in winter constructions. Commercial concrete and large-scale concrete structures, such as highway, railway, bridge, harbor, industrial and civil facility projects Applicable condition: NOF®-D1: rated temperature ¡Ý -15¡æ; outdoor temperature ¡Ý -20¡æ NOF®-D2: rated temperature ¡Ý -10¡æ; outdoor temperature ¡Ý -15. Method and cautions Dosage (total cementitious materials): Powder 2.0~3.0%, Liquid 2.0~3.0% Powder admixture can be added with binding materials, liquid with mixing water. Increase mixing time properly. Hot water helps to improve its performance. In winter constructions, no ice, snow or freezing elements in aggregate materials. Raw materials should be pre-heated if possible. After pouring, cover plastic film and enhance thermal insulation curing. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. The feasibility of combination with other admixtures needs to be conformed by mixture tests. This powder product is packed into plastic knitting bags, 50 kg/bag; the liquid product is packed into plastic barrel, 200~250kg/BBL or transported by tankers. During storage, it needs to be prevented from moist, broken packed and high temperature. The effective duration is one year. Expired product needs to be determined by tests. This product is not inflammable or explosive and need to be well kept.
Product overview This product is combined several types of anti-freezing organic and inorganic anti-freezing components with accelerating components. It is mainly applied in fresh concrete and precast concrete units in winter constructions. This product meets JC473 standard. Benefits Efficiently decrease the freezing point of free water Accelerate the hydration of concrete in cold temperature; enhance the early stage strength of concrete and anti-freezing ability. Characteristics of accelerating, enhancement, water reducing and air-entraining Can function as early strength admixture Improve the physical mechanic ability and duration index of concrete. Low level of alkalis, no corrosion to the steel structures. Areas of Application All types of pumping concrete and commercial concrete in winter. Commercial concrete and large-scale concrete structures, such as highway, railway, bridge, harbor, industrial and civil facility projects Can be combined with water reducers to manufacture plasticizing and pumping concrete. Applicable condition: NOF®-D3: rated temperature ¡Ý -15¡æ; outdoor temperature ¡Ý -20¡æ NOF®-D4: rated temperature ¡Ý -10¡æ; outdoor temperature ¡Ý -15¡æ Method and cautions Dosage (total cementitious materials): Powder 2.0~3.0%, Liquid 2.0~3.0% Powder admixture can be added with binding materials, liquid with mixing water. Increase mixing time properly. Hot water helps to improve its performance. In winter constructions, no ice, snow or freezing elements in aggregate materials. Raw materials should be pre-heated if possible. After pouring, cover plastic film and enhance thermal insulation curing. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. The feasibility of combination with other admixtures needs to be conformed by mixture tests. This powder product is packed into plastic knitting bags, 50 kg/bag; the liquid product is packed into plastic barrel, 250kg/BBL or transported by tankers. During storage, it needs to be prevented from moist, broken packed and high temperature. The effective duration is one year. Expired product needs to be determined by tests. This product is not inflammable or explosive and need to be well kept.
China (Guangzhou) Intl Exhibition for Steel Construction & Metal Building Materials (Steel Build 2016) Date: May 13th-15th, 2016 Venue: Poly World Trade Expo Center(PWTC) China Market, With Boundless Business Opportunities! In recent years, Green Building becomes the focus of environmental protection. As an important representative of green buildings, steel structure is bound to be placed on the top priority in the development of the society. Therefore, China must be the market you never ignore and Steel Build 2016 is a must-come event for companies who are going to step into this expanding market in future decades. About Steel Build As one of the important thematic exhibitions of China (Guangzhou) Int¡¡¡¨º¡¨¨l Housing Industry Expo, Steel Build 2015 has successfully held in Guangzhou, China with the support of China Council for the Promotion of International Economic and other well-known organizations and media. Steel Build 2015 and concurrent events of China (Guangzhou) Int¡¡¡¨º¡¨¨l Housing Industry Expo(CIHIE) has successfully gathered 700 exhibitors in total. Nearly 100 worldwide famous exhibitors including FRAMECAD, CHINATOTAL, VERTEX CAD/PDM, METAL-EXPO, Lai Gang Integrated Building (Qingdao) Development Co., Ltd., Qiguang Group, etc, were attracted to demonstrate their latest steel products and technology. And 850 high quality buyers from 75 countries attended the show and most of them felt it a fruitful trip and were willing to attend the show next year. With 4-years rich experience, Steel Build 2016, ceremoniously staged in Poly World Trade Expo Center from May 13th to 15th, 2016, is devoted to creating a perfect platform for worldwide industry related merchants and purchasers to promote communications and cooperation. In addition, as a major exhibition of China (Guangzhou) Int& ¨¨l Housing Industry Expo(CIHIE), more related exhibits and products like prefab/modular houses, mobile cabins, waterproofing products, etc can be found during the same period. Concurrent Event--Special exhibitions of China (Guangzhou) Int¡¡¡¨º¡¨¨l Housing Industry Expo(CIHIE) The 6th China Prefab House, Modular Building, Mobile House & Space Fair The 8th Guangzhou International Wooden House&Wooden Structure Fair The 6th China International Roof,Facade & Waterproofing Exhibition The 6th China Rooftile & Technology Exhibition China Guangzhou International Floor Fair Exhibition Scope Steel frame buildings, Space frames Structural Steel Fastening & Fixing Systems Protection-Drywalls, gypsum board, Fire stops, Fireproof Sprays/ Coats, etc Insulations Keel/curtain wall/façade and roofing systems Pre-Engineered Building Systems (PEB) Structural Steel Machinery & Tools Software Solutions for steel structures Steel Tubes/ Pipes/ Structural Hollow Sections Sheet Metal Materials Metal Decking/Floorings Metal Profiles For more detailed information about Steel Build 2016, please kindly refer to http://www.steelbuildexpo.com/ or email us at grand.wa@grahw.com.
Description YL-09 NP is naphthalene-based non-chloride set-accelerating water-reducing admixture, it significantly accelerates setting time, and reduces the quantity of mixing water necessary to produce concrete of a given consistency, while providing greater economy for a given strength. It increases strengths and significantly improves permeability, workability and finishing characteristics. It complies with GB 8076-2008, GB50119-2003 and ASTM C494, Type E. Uses This product is designed for the constructions requiring earlier strength for normal concrete, steel-reinforced concrete, and pre-stress concrete under normal temperature, low temperature (-5 to 30 degree C). Widely used in pre-cast & deposit concrete, armored concrete, pre-stressed reinforced concrete and fly-ash-cement concrete. Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. Suitable for self-cured concrete and its formulations. It has remarkable effects of water reduction and enhancement, especially at the early stage. The modulus and site utilization can be improved. Advantages Accelerating setting time across a wide range of temperatures. Increasing early and ultimate compressive and flexural strengths. Water reducing 10-15% with low dosage of 1.5-2.5% After application, all physical properties of concrete can be improved to a certain extent. 10%-15% of cement will be reserved when it is applied as a condition of blending in which collapsibility and strength are fixed forehand. Specifications Item Norm Item Norm Appearance Gray powder PH value 7-9 Fineness (0.315mm remains) % ¹12% Chlorine content Non Moisture ¡¨¹10% Fluidity of cement 160mm Technical Data Sheet Item Actual results Criteria Water-reducing rate (%) Y12 Y8 Bleeding rate ratio (%) 90 Air content (%) ¡¨¹2.5 4.0 Setting time difference (min) Initial setting -30+30 -90+90 Final setting -30¡«+30 -90+90 Compressive strength ratio (%)Y 1 day 145 135 3 days 140 130 7 days 120 110 28 days 110 100 Shrinkage ratio (%) 28 days ¡¨¹120 135 Corrosion reinforcing steel bar Non Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Supplier: Pre- fabricated buildings, construction materials
The products: the concrete hollow core board can be used as the floor in the buildings. They are stout with many steels inside. With smooth surface, solid construction, high strength and precise dimension, the hollow core slab meets all the national specification requirements. The machine: the precast cncrete slab machine produced in haitian is the best concrete components with top technique in china. There is the vibration set inside the machine which can help form slabs faster. The precast concrete slab forming machine is well designed, easy to control, maintain and repair. The company: haitian is a professional producer of precast concrete slab forming machine. Our company can design and manufacture various kinds of concrete structures molding equipment according to customers' demand. Configuration of tw120*1200: Pre-cast concrete core slab extrusion forming machine Type: tw120x1200 Thickness of slab: 120mm Width of slab: 1200mm Molding speed: ,161;,221;1.2m/min Number of holes: 10 Hole diameter: ,166;,181;87 Main power: 11kw Vibration power: 2kw Overall size: 2190x776x892mm Weight: 2.25t Seaworthy package.
Sand Washing Machine is also called Sand Washer, Washing Machine, Wash Equipment, Sand Gravel Washer , Sand Cleaning Machine, Sand Washing Equipment, Sand Cleaning Equipment. XSD series High-efficient Sand Washing Machine, which is used for washing away the stone power and impurity in the sand made by the Sand Making Machine, to increase the sand quality, is a necessary equipment to wash sand in coordination with the sand making machine. XSD series high-efficient Sand Washing Machine, on basis of the practices in sand and stone industry, designed by our professionals. This series product possesses the good qualities that high cleaning, reasonable structure, high capacity, energy saving, low sand loss. The special design for the transmission part separating with water and sand enables its low maintenance. It is the best choice for our customers. It is always used in washing, grading and dehydrating quartz and sand in Construction Site. Sand stone Factories, Hydropower Station and Concrete Dam Site, Pre cast Concrete Factory, Glass Factory and etc. Models: XSD2610, XSD3016,XSD3620 Impeller Specification (mm) (D,W): ¦2600,1000, ¦3000,1600,¦3600X2000. Capacity (t/h): 20~50, 50~120,120-180 Feed Size (mm): ¡Ü10, ¡Ü10,¡Ü10 Overall Dimensions (L,W,H): 3320,2125,2670, 3810,2686,3085,4500,3206,3480.
Description Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting. 2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively. 3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose. 4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour. 5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions. 6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode. 7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization. 8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers. Uses and Dosages 1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing. 2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%. 3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely. Package, Storage & Handling 1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months. 4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 16 tons loaded in a 20ft.
