Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by resin casting. With its many rectangular and square spaces, it provides two-dimensional homogeneous mechanical characteristics. The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh sizes and thickness - Advantages - Easy to assemble - High Load-bearing capacity - Easy to install and maintain / repair - Durable in harshest environments - Suitable for ventilation and natural lighting
Fiberglass Pipe Descirption: 1. Fiberglass sleeving is made of high quality texturized fiberglass yarns by twill braiding process. 2. Fiberglass sleeving will not burn and will withstand continuous exposure to temperatures of 1000°F / 520°C. 3. Fiberglass sleeving resists most acids and alkalis and is unaffected by most bleaches and solvents. 4. Fiberglass sleeving is highly flexible and conformable. Fiberglass Pipe Application: 1. Fiberglass sleeving provides excellent protection for industrial wires, cables, hoses (hydraulics), tube and pipes and also provides thermal insulation and personnel protection. -
Silicone fiberglass sleeving is an insulating sleeving produced with a thermal process. It is woven as sleeving by non-alkali fiberglass and coated with a silicone resin/rubber. The thermal treatment and the special resins/rubbers used for this item give the material a very good softness and elasticity, excellent high temperature resistance and good dielectric strength. And widely used in wiring insulation and mechanical protection for electric motors, transformers and electrical instruments. 1. Type: wsg-1, wsg-2, wsg-3, wsg-4, wsg-5 2. Operating temperature: -10~+260¡ãc 3. Rated voltage: 1500v~ 10000v 4. Flame retardant: ul vw-1 5. Roll package: 100, 200 meters per roll 6. Packing: roll or cutting length as per customer's need 7. Standard color: white, other colors are available at requesting 8 cetificate: ul1441 9. Application: Motor and transformers Household electrical appliances Tv set and electric instrument Heating equipment The special lamps and lanterns Packing: roll or cutting length as per customer's need
Fiberglass sleeving Type properties average voltage (v) high breakdown volage, resistant temperature 200 . 7000 middle breakdown volage, resistant temperature 200 . 4000 Low breakdown volage, resistant temperature 200 . 2500
Fiberglass sleeving coated silicone resin Model Number: SB-SGS-12 Working temperature: -60~200ºC Structure It is braided by non-alkali fiberglass, then coated with silicone resin and treated in high temperature. Characteristics Flammability: self-extinguishing, wear resistance, tear resistance, good compatibility with same class impregnation varnishes, good mechanical resistance, very flexible Application Internal wiring of electronics, electrical appliances and automotive, classes H and C motors, transformers, generators, heating apparatus, lighting, control, inverter, etc. Specification Item Performance Note Dielectric breakdown Voltage KV AC Minimum average â?¥1.2 Before aged Thermal endurance No Indication of crack OK 6 HRS* 245±5ºC 245±5ºC 6HRS AGING Fire resistance VW-1 OK UL 1441 Dimension Size from ID0.5mm to 30mm Package: Packing by rolls or cut upon request. Color: Standard color is white, other color available upon request. The colors of braided can be customized.
Silicone fiberglass sleeving is braided into tubes with non-alkali fiberglass,and the painted with silicone through high temperature.It has such features as excellent electricitry-avoidness,flame off-self and flexibilty.It is widely used in insulating protection of H&N grade automobile,shipbuilding,electrical machinery,home appliance,electric and heat equipment,special lightware and internal wirese bunching of TV and electronic equipment,etc.
Silicone rubber fiberglass sleeving (inside fiber outside rubber),woven as sleeving by non-alkali fiberglass and coated with silicone rubber in high temperature.It has excellent dielectricity automatic quench and softness,widely used in insulation protection of internal line cluster in H&N machinery,household electrical appliance,electric and heat device,special illuminations,TV set and electric instrument.
Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
Model : FRP plastic cover Standard: Flexible Configuration: FRP & Steel frame Features: In general, the role of the sewage treatment plant is to reuse the factory waste water, living waste water, livestock waste water generated from factory, home and fields and the polluted water through separate treatment process and discharge them to river or sea. For this processing of sewage or waste water in the sewage treatment plant, it is required to install the plastic cover on the top of storage tank to prevent the harmful gas or bad odor generated in the tank that stores the waste water and purifies microorganism by chemical reaction or in the process of waste water treatment in the above tank. The installation of this plastic cover is to remove the harmful gas or bad odor and minimize the physical and mental damage of the related people in the working place or residents.
