Yamama Petrochemicals

Chinese name alumina aluminium oxide alumina Chemical formula Al Molecular weight 101.96 CAS login number 1344-28-1 EINECS entry number 215-691-6 Melting point 2054�ºC Boiling point 2980 â?? Water soluble insoluble in water, soluble in strong alkali and acid Density 3.5g /cm�³ White amorphous powder on the outside It should be used as analytical reagent, adsorbent, etc Alumina is a stable oxide of aluminum, the chemical formula is Al2O3. It is also known as bauxite in mining, ceramics and materials science. Properties: white solid insoluble in water, odorless, tasteless, extremely hard, easy to absorb moisture without deliquination (burned without hygroscopic). Alumina is a typical amphoteric oxide (corundum is �±-shaped and belongs to the most dense hexagonal packing, is an inert compound, slightly soluble in acid and alkali corrosion resistance [1]), soluble in inorganic acid and alkaline solutions, almost insoluble in water and non-polar organic solvents; Relative density ( Storage: Keep sealed and dry. Uses: Used as analytical reagent, dehydration of organic solvent, adsorbent, organic reaction catalyst, abrasive, polishing agent, raw material for smelting aluminum, refractory

Product Description Lithium chloride Chemical formula: LiCl Molecular weight: 42.39 CAS No.: 7447-41-8 Melting point: 605 C Boiling point: 1350 C Density: 2.07 g/cm Appearance: white crystal Dangerous: none physical properties Lithium chloride is a white crystal, easily soluble in water, with a solubility of 67g/100ml of water under standard conditions. It is also easily soluble in organic solvents such as ethanol, etc. Therefore, if chlorohalogenated hydrocarbons are used in the preparation of hydrocarbyl lithium, free hydrocarbyl lithium reagents (lithium bromide, Lithium iodide forms adducts with lithium hydrocarbyls and acts as a stabilizer). Applications The raw material for the preparation of metallic lithium. Flux for metal production by electrolysis (such as titanium and aluminum production), used as aluminum welding agent, air conditioner dehumidifier and special cement raw material, also used in flame, in the battery industry for the production of lithium-manganese battery electrolyte, etc. . Anhydrous LiCl is mainly used for electrolytic preparation of metal lithium, aluminum flux and flux and moisture absorption (dehumidification) agent in non-refrigerated air conditioners. Metal lithium can be obtained by electrolyzing the mixed molten salt of LiCl/KCl at 600 �°C. Industrial metal industrial is produced by this method. Lithium chloride is also used as a moisture scavenger in air conditioning systems, as a good flux in the electrolytic production of metals or in the preparation of powders (such as in the production of titanium and aluminum), as a precipitant for RNA, and as an additive in the Stille reaction . Lithium chloride can be formulated with DMF in different concentrations as a solvent for dissolving polymers. Commonly used as an eluent for GPC measurements of molecular weight. Component Standard value(wt%) Typical value(wt%) LiCl 99.3 99.5 H2O 0.60 0.25 Na 0.02 0.01 K 0.02 0.005 CaCl2 0.02 0.01 Fe2O3 0.002 0.001 SO42- 0.003 0.0015 HCl insoluble 0.005 0.003

Product Name: Linear Alklybenzene Sulphonic Acid 96% Other name:Dodecyl Benzenesulfonic Acid/ DBSA Molecular Formula: RC6H4SO3H, R=C10H21-C13H27 Appearance: Brown viscous liquid CAS No.: 85536-14-7 Description 1.Appearance is brown sticky liquid. Make LABSA 96% for detergent 2.The product has the action of detergency, moistening, foaming, emulsion, dispersion and brown viscous fluid in appearance with acidity. 3.It is non-flammable, quickly dissolved in water, not dissolved in normal organic solvent. 4.The product has strong absorbency 5.it would be unclear viscous liquid after absorbed water. Specification ITEM STANDARD Appearance ( 25�°C ) brown liquid Active Matter (Alkyl benzene Acid) % â?¥96 Free oil % â?¤2.00 Sulphate % â?¤1.50 Water content % â?¤1.00 Color(5% Am. Aq. Sol.)Klett â?¤50 pH's Value 2-3 Application 1.in hair shampoo, bath shampoo, dish detergents and complex soap, laundry powder, dishware cleaner in daily chemical industrial 2. in wetting and clearer , dyeing assistant in textile industry 3.degrease agent in electroplate and leather manufacture 4.de-inking agent in paper making.

Chemical formula C18H36O2 [4] Molecular weight 284.48 CAS Login Number 57-11-4 [4] EINECS Entry Number 266-928-5 [4] Melting point 67 to 72 �° C [4] Boiling point 361 �° C [4] Water soluble and insoluble Density 0.84 g/cm�³ White waxy transparent solid or yellowish waxy solid Should be used to produce stearate Security Description S37/39; S26; S16 Hazard symbol R11; R36/37/38 Production method Oil hydrolysis production Mainly used in the production of stearate: sodium stearate, magnesium stearate, calcium stearate, lead stearate, aluminum stearate, cadmium stearate, iron stearate, potassium stearate. Widely used in cosmetics, plastic cold-resistant plasticizer, release agent, stabilizer, surfactant, rubber vulcanization accelerator, water repellent, polish, metal soap, metal mineral flotation agent, softener, medicine and other organic chemicals. In addition, it can also be used as solvent for oil soluble pigments, crayon smoothing agent, wax paper polishing agent, emulsifier of stearate glycerin, etc. The product is used in the food industry as a lubricant, defoamer and food additives stearate glycerin, stearate sorbitan anhydride ester, sucrose ester and other raw materials. Used as auxiliary raw materials and raw materials for daily chemical products. Stearic acid is widely used in the manufacture of PVC plastic pipes, plates, profiles and films. It is a PVC heat stabilizer with good lubricity and good light and heat stability. In plastic PVC pipes, stearic acid helps to prevent "coking" during processing, and is an effective heat stabilizer added in PVC film processing, while preventing discoloration of the finished film caused by exposure to sulfide. Rubber industry Stearic acid plays an important role in the synthesis and processing of rubber. Stearic acid is a vulcanizing active agent widely used in natural gums, synthetic rubber and latex, and can also be used as a plasticizer and softener. In the production of synthetic rubber process need to add stearic acid as emulsifier, in the manufacture of foam rubber, stearic acid can be used as a foaming agent, stearic acid can also be used as rubber products release agent. Cosmetics industry Stearic acid is used to emulsify two types of skin care products, such as cream and cold cream, so that it becomes a stable white paste. Stearic acid is also the main raw material for making almond honey and milk. Stearic acid soap esters are more widely used in cosmetics industry.

2-Aminopyrimidine CAS: 109-12-6 Chemical formula: C4H5N Density 1.3± 0.1g /cm3 Boiling point 148.0�±23.0 �°C at 760 mmHg Melting point 122-126 �°C(lit.) Molecular formula C4H5N3 Molecular weight 95.10 Flash point 43.3�±22.6 �°C Accurate mass 95.048347 PSA 51.80000 LogP minus 0.89 Appearance Properties Beige to light yellow crystalline powder Vapor pressure 4.3�±0.3 mmHg at 25�°C Refractive index 1.632 Storage condition Store in a cool, ventilated warehouse. Keep away from fire and heat. Should be stored separately from oxidizer, do not mix storage. Equipped with the corresponding variety and quantity of fire equipment. The storage area should be equipped with leak emergency treatment equipment and suitable containment materials. stability Avoid contact with strong oxidants. 2-Aminopyrimidine is an organic compound with the formula C4H5N3. It is white crystal, weakly alkaline, soluble in water, alcohol and some organic solvents. 2-aminopyrimidine is widely used in medicine. It is used as a drug intermediate to synthesize a range of biologically active compounds, such as anti-tuberculosis drugs. In addition, it can also be used to manufacture dyes, rubber flame retardants, pesticides and so on.

Cyanuric acid known as tricyanic acid; white crystals, precipitated from water, with two crystal waters. The taste is slightly bitter, basically non-toxic, soluble in hot water, slightly soluble in cold water, the aqueous solution is acidic, insoluble in cold organic solvents such as alcohol, ether, and benzene. The chemical formula is C3H3N3O3, and there are two isomers, namely ketone and enol structures, which usually exist as a mixture of two isomers Powder and granular and tablet For stabilizer in swimming pool For making TCCA, SDIC,TGIC... Cyanuric Acid stabilizer-Cyanuric Acid(CYA) 2,4,6-Trihydroxy-1,3,5-Triazine Synonym: Isocyanuric acid, Tricyanic acid Molecular Formula: C3N3O3H3 M.W.: 129.1 Property: Odorless white crystalline powder or grain. Item Index Result Appearance White powder White powder Content(%) 98.5 98.6 Moisture(%) 0.5 0.1 PH value(1%solution water) 4.0-4.5 4.1 Ash Content(%) 0.1%max 0.05% Fe2+ (ppm) 5 10 Sulphate 0.5%max 0.05% Ammelide/Ammeline 0.5% 0.18% White degree 90 93

Phenol is an organic compound with C6H5OH. It is a colorless needle -shaped crystal with a special smell. It is toxic and is an important raw material for producing certain resins, sterilization agents, preservatives, and drugs (such as aspirin). It can also be used for the treatment of sterilized surgical equipment and excrement, skin sterilization, itching and otitis media. The melting point is 43 �° C, which is slightly soluble at water at normal temperature, and is easily soluble in organic solvents. When the temperature is higher than 65 �° C, it can solve the water in any proportion. The phenol is corrosive. After contact, the local protein degenerates. The solution can be washed with alcohol with alcohol. A small part of the phenol is exposed to the air by oxidation into pink. When the three -price iron ion becomes purple, this method is usually used to test the phenol. Phenol Chemical: C6H5OH Molecular weight : 94.11 CAS login number : 108-95-2 Einecs login number : 203-632-7 Melting point : 43 �ºC Boiling point : 181.9 �ºC Density: 1.071 g/cm�³ Flash Point: 72.5 �ºC Observation : white needle crystal or sheet powder Melting point 43 �ºC Boiling point 181.9 �ºC density 1.071 g/cm�³ Refractive rate 1.5425 Flash Point 72.5 �ºC Exterior White needle crystal or sheet powder

Supplier: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate
Buyer: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate