Low & High Voltage Silicon Rubber Insulator Long Rod Composite Suspension Insulator Manufacturer Composite Suspension Rod Insulator (Export Type) Installation Instruction: 1. The transportation and installation of the insulator shall be taken good care without any throwing or collision, fiction with various sundries(wires, iron plates and tools etc.) and solid material. 2. When suspending the composite insulator, the knot shall be made on the attachment at the end. Knot on shed or sheath are strictly prohibted. When the rope has to be contacted with shed or sheath, the contacting area shall be packed with soft cloths. 3. Never apply the composite insulator as the assistant tool for the wire distribution and collecttion and collection in case that the insulator can be damages by impact or bending moment. 4. Do not step on the insulator shed with foot. 5. When installing the grading ring, attention shall be attached on the adjustments to make sure that the ring is vertical with the axial of the insulator. And for opening grading ring, the openning directions at both ends shall be consistent to facilitate the discharging and protect the shed. ______________________________________________________________________________ This's Jack from Nengxing Electric Power Equipment (China). We're an innovative high-tech enterprise integrating Rï¼?D, production, service and construction of surge arrester, composite insulator, fuse cut-out, etc. (as the attached pictures) We undertake a national technical project and supply for the State Grid of China.
Silicone Rubber Insulation High-voltage Installation Wire(5KV-DC-30K V-DC) Silicone Rubber Insulated Cable Silicone Rubber Insulation Wire Silicone Rubber Insulation High-voltage Installation Wire Product features: Silicone Rubber Insulation High-voltage Installation Wire is very flexible for bending. Moreover, it has a wide operating temperature range and high-voltage resistant as well. The electrical properties meet or exceed even the best organic insulation materials. It is also radiation resistant, moisture resistant, deformable, and defenses the corrosions of some chemicals such as acid. Recommended applications: This wire applies to TV high voltage output, connects rectifier and kinescope, or can serve as connecting wire of fixture wire in other apparatus and instrument. The operating temperature of the wire is180
AGRP Silicone Rubber Insulated Fiberglass Braided Wire TECHNICAL DATE Nominal Voltage:500V Temperature Range:-60C~+200C Conductor: stranded tinned copper Insulator: silicone rubber+fiberglass braided O.D.Tolerance:±0.05mm Testing Volta:2000V Colour: white, blue, red, black, brown, orange, purple, gray, yellow, green, yellow-green, etc. CHARACTERISTIC RoHs compliance, high temperature resistance, low temperature resistance, high voltage resistance, aging resistance, excellent electrical resistance property, excellent chemical property, etc. APPLICATION Apply to household appliance, illumination & lighting & headlamp, electronic equipment, electric machines, temperature sendsor, aircraft, aviation, military series, metallurgy chemical series, motor cars & ships, electric heating products, electrical installation, etc.
TECHNICAL DATE Nominal Voltage:500V Temperature Range:-60C~+200C Conductor: stranded tinned copper Insulator: silicone rubber+fiberglass braided O.D.Tolerance:�±0.05mm Testing Volta:2000V Colour: white, blue, red, black, brown, orange, purple, gray, yellow, green, yellow-green, etc. CHARACTERISTIC RoHs compliance, high temperature resistance, low temperature resistance, high voltage resistance, aging resistance, excellent electrical resistance property, excellent chemical property, etc. APPLICATION Apply to household appliance, illumination & lighting & headlamp, electronic equipment, electric machines, temperature sendsor, aircraft, aviation, military series, metallurgy chemical series, motor cars & ships, electric heating products, electrical installation, etc.
Product features: Rated voltage:600v Rated temperature:-60+200 Conductor: nickel-coated, tin-coated and silver-coated copper wire Insulator: silicone rubber Applicable for electron, electrical household appliance, lamps and lanterns, And the internal high temperature environment of combustion equipment Wire lettering: ul awm3135 Items Technical datas Applied standard Outer appearance Smooth, even, without loose Ul 758 Ul 62 Ul 1581 Spark test Ac6kv/ 0.15 s Vol. Test 2 kv/1 min Insulation resistance 30.5m¦¸.Km Mechanical properties of insulation material Before aging Tensile strength 3.45n/mm² Elongation at break 100% After aging Tensile strength 60% of the tensile strength before aging (2101¡á1440h) Elongation at break 25% of the elongation before aging Poisonous substance control Comply with rohs rule Eu2002/95/ec Packed in roll or on woooden reel, then packed in carton, 500-1000cartons/20'fcl
Our advantage: we not only produce silicone rubber, but also glass fiber rod by ourselves to assure the quality and best price. Features of insulator: 1) Silicon Rubber for sheds/ housing 2) Glass-fiber reinforced epoxy resin rod (ECR type) for core 3) Hop dip galvanized cast steel for metal fittings 4) Rated voltage:10KV~220KV 5) 5000hours aging test. 6) IEC Standard. Standard.
Products have been sold to 30 provinces and districts including Taiwan and also have been exported to over 20 countries in Asia, Africa, Europe, America and Australia. Now we are looking for agency in Africa and Europe, we warmly welcome customers from all the world to visit our company and estanlish long term business relations! Our products cover: long rod suspension composite insulator, cross-arm composite insulator, pin type composite insulator, indoor & outdoor post composite insulator, electrified railway composite insulator. Wooden case/barrel.
Long rod composite insulators are mainly used in high voltage overhead power transmission & distribution lines for insulation and mechanical connection. Normal operation conditions: 1 Ambient temperature: -50c-+50c 2 Altitude: not more than 3000m 3 Frequency: not more than 100hz.
Rubber Insulations
The structure of disc suspension insulators enables them form the insulator string by fitting into themselves one another as per voltage requirement. Connected fitting type: ball & socket type; clevis & tongue type Strength can be 40 kn, 45kn, 60kn, 70kn, 80kn, 100kn, 110kn, 120 kn, 125kn, 160kn, 210kn, 300kn Main type: Standard suspension insulator: Ansi type: 52-1, 52-2, 52-3, 52-4, 52-5, 52-6, 52-8, 52-9 according to ansi c29.2 Iec type: u70bl, u70bs, u100b, u120b, u160b, u210b, u300b according to iec383, bs137 Fog type anti-pollution suspension insulators Double shed anti-pollution insulators Standard exporting packing, 2520pcs/container
