Product quality Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm. Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors. Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg The impurity composition of our tin ingots:
Electrolytic Tinplate is a thin cold rolled steel sheet coated by tin. Itâ??s also called ETP or Tinplate. The tinplate has excellent corrosion resistance, excellent paintability and printability, excellent solderability and weldability, also excellent formability and certain strength and hardness. The surface of the tinplate is bright and beautiful. The tin layer is non-toxic and tasteless, it can prevent the iron on the original steel plate from being dissolved into the package. Depends on the purpose of use, various of pictures can be printed on the surface of the tinplate to beautify the goods. The tinplate is widely used in the manufacturer of three-piece cans, two-piece cans, chemical barrels, aerosol cans, all kinds of fancy cans, crown caps, beer caps, food package bottom caps, easy open ends (EOE), electronic accessories, cables and battery iron, etc. We can provide tinplate (ETP) with various coating thickness with temper ranging from T1 to T5 and DR7M to DR10. The ID of the ETPâ??s packaging coil has 420mm and 508mm in options.
Tin
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
1.Thickness: 0.15mm-0.17mm Width: 800mm-980mm Temper: 0.15mm DR7-DR9 0.16mm T5-DR9 0.17mm T4-DR9 Finish: bright, stone, matt Annealing: BA Steel: MR/ SPCC/L 2.Thickness: 0.18mm-0.55mm Width: 600mm-980mm Temper: T2-DR9 Finish: bright, stone, matt Annealing: BA Steel: MR/ SPCC/L
Tin, which is sn plating, tin known as tinplate, tin-plated sheet steel is commonly known, the english abbreviation for the spte, refers to both sides of the commercial pure tin-plated cold-rolled carbon steel sheet or strip.Tin to prevent corrosion and rust from the main role.It's strength and formability of steel with the corrosion resistance of tin, tin solder and attractive appearance combined with being in a material with a corrosion-resistant, non-toxic, high strength, good ductility properties. Material: mr/spcc/spte/q195 Thickness: 0.14-0.45mm Width: 200-1050mm Temper: t2, t2.5, t3, t3.5, t4, dr8, dr9 Coating: 2.8/2.8, 5.6/5.6, 2.8/5.6...11.2 maximun Surface: finish Bright, stone, silver, matt Annealing: ba & ca Oiling Dos Application: bottle cap, paint, chemical can and other usage can making
1. Technical standard: DIN, GB, JIS 2. Steel type: MR, SPCC,SPHC 3. Thickness: 0.15 - 0.50 mm 4. Roll width: 450mm- 970 mm Coil ID: 508 mm 5. Cut length: 600mm-1200 mm 6. Tin coating weight: 1.1-5.6 or according to your requirement. 7. Temper: T1-T5, DR8 annealing:BA 8. Surface: Bright/Stone/Silver/Matt finish with passivation treatment; DOS oil 9. Packaging detail: Thin plastic film, rust-proof paper, metal cover, metal corner, metal band, wooden skid.
Standard: iso11949 - 1995, gb/t2520-2000, jis g3303, astm a623, bs en10202 Material: mr, spcc, sphc, sphd, s08al, q195 Thickness: 0.15mm - 0.4mm Width: 60mm -980mm Temper: t1 - t5;dr8 - dr10 Annealing: ba & ca Coil diameter: 420mm, 450mm or 508mm Weight: 6-10tons/coil Oil: dos 311 Surface finish: bright, stone, matte, silver Tolerance: -/+ 0.01mm for thickness, -0/+ -0.23mm for width and length. Packing: 1. For sheets: thin plastic film + rust-proof paper + metallic cover + metallic angles+ steel band strips + wooden pallet. 2. For coils: thin plastic film + rust proof + plastic protect plate + steel band strips.
Thickness: 0.16mm-0.3mm (Tolerance: +/-0.01mm) Width: 600mm-1100mm Steel Material: SPCC, MR Annealing Type: BA (Batch Annealing) Temper: T2.5, T3, T4, T5, DR8. Standard: JIS G3303 Chrome coating: 2.8/2.8 2.8/5.6 5.6/5.6 Surface Finish: Bright , Matt Oiling: DOS ProductionCapacity: 3000 Tons/Month The Usages: Food can, Paint cans, Chemical cans Export Package: Anti-rust paper, steel cover, corner protected, steel strip and pallets