Coal-based ACTIVATED CARBON DATA SHEET Material:bituminous coal or anthracite Form: Cylindrical(1.5mm,2mm,3mm,4mm,5mm,10mm etc.) Powder(200mesh through rate 90%,325mesh through rate 90% etc.) Granular(8x30mesh,12x40mesh,30x60mesh etc.) Application: 1.For water treatment 2.For gas&air purification 3.For biogas desulfurization 4.For odor control 3.For solvent recovery 4.For garbage burning 5.For pressure-swing adsorption etc. SPECIFICATIONS 1.Iodine adsorption:1100mg/g max. 2.Methylene blue adsorption:240mg/g max. 3.Water content:5% max. 4.Ash content:15% max. 5.Hardness:95% min. 6.CTC adsorption:110% etc.
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Material:Sawdust Form: Powdered activated carbon (200mesh through rate 90%,325mesh through rate 90% etc.) Application: 1.For Amino Acid (MSG) industry 2.For food and beverage purification 3.For decolorizing and refining of various edible syrups,wine,fruit juice,glutamic acid,citric acid,etc. 4.For decolorizing and impurity removing in various sodium glutamate industries,sugar refining industry,chemical additives,starch sugar industry and so on. 5.For water treatment SPECIFICATIONS 1.Partical size:200mesh through rate 90% 325mesh through rate 90% 2.Iodine adsorption:900mg/g min. 3.Methylene blue adsorption:300mg/g max. 4.Water content:10%-60% 5.Ash content:8% max. 6.Fe content:0.05%min. 7.CL content:0.025%min. etc.
Moisture(weight) Ash Particle size Performance of decolouring 20kg/bag
Coal Based Granular Active Carbon possesses both a high surface area and a large internal pore volume. These properties give the carbon not only high VOC adsorption capacities, but also high retentivities for retaining and preventing the desorption of previously adsorbed organic compounds. Being manufactured from high rank coals results in an inherently low ash content, making these carbons ideally suited for critical gas phase adsorption applications. APPLICATIONS: Dechlorination/chloramine reduction, Removal of organic contaminants, Disinfection by-product (DBP) removal, High purity water applications, Beverage processing.
Coal Based Activated Carbon Coal based activated carbon originates from coal that has undergone a steam activation process. During activation, millions of pores are created on the surface of the carbon, increasing the total surface area. Coal based carbon has mainly meso-pores and macro-pores and is very popular in gas phase purification, potable water purification, wastewater purification and aquarium/pond water purification applications.
Wood Based Powdered Activated Carbon is produced from high quality sawdust, which has large adsorption capacity and fast filtering characteristics. Most pores in wood based carbon are in the meso and macro pore region which is ideal for decolorization of liquids and water. Mainly used in kinds of amino acid or water industry, refined sugar decolorization, such as diet sugar, sucrose, fructose, xylose and other sugars, monosodium glutamate industry, glucose industry, starch sugar industry, chemical fertilizer, dyes intermediates, and food additives. It is black powder in appearance.
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
