FE 65 +/- 0.5% Range Feo 1% Max P 0.05% Max S 0.008% Max Sio2 4% Max Moisture 0 Max Tumbler Index 95 Min Abrasion Index 4 max ------------------------ CCS (KG/P) 250 Min Size (9-16 mm) 90% Min Size
Iron Ore Pellet
Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
We are selling more than 20,000 tons of Steel Iron pipes available now, with the following diameters : - 186 28' pipes each weighing 5.2 tons - 283 18' pipes each weighing 2.28 tons - 5 30' pipes each weighing from 800kg to 1ton - 561 22' pipes each weighing 4.2 tons - 78 22' pipes each weighing 4.2 tons - 4 22' pipes each weighing 4.2 tons - 27 22' pipes each weighing 4.2 tons ect Ideal for recycling or low cost infrastructure projects. FOB price is on demand and negotiable For more information, do not hesitate to contact me on my email address or on WhatsApp ================================================================= OTHERS PRODUCTS ================================================================= Metals & Non-Ferrous : - Copper Cathodes - Copper Powder - Thermal Coal - Gold - Nickel - Iron Pipes - Cobalt
IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI
Supplier: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Buyer: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
The rapid expansion of high-power EAFs (Electric Arc Furnace) has increased the interest to use DRI as a great option for the continuous charging of electric furnaces in developed countries. Sponge iron is a valuable source of iron for the production of high-quality steel. With the Direct Reduction technology that has been developed considerably in recent years, sponge iron melting in electric arc furnaces has more qualitative advantages than scrap metal smelting for steel making. Some of the benefits include: More specific chemical composition Low levels of impurities (gangue, sulfur, and phosphate) The impossibility of using cheap scrap Easy storage and shipment Continuous automatic charging Predictable price structure Fixed power of input electricity Relying on the knowledge, valuable experience and history, and empowerment of our team, we, Arij Global Trading Co. are supplying our high-quality gas-based DRI to the far destinations in containerized and bulk shipment. As a supplier of gas-based Sponge Iron with a great history and experience, we also provide cost-effective solutions for the shipment to our customers in complete accordance with their needs, which ultimately fulfills the goal of providing satisfying service.
Sponge iron is used in the iron and steel industry as a substitute for scrap in induction and electrical arc furnaces. Over the years, the shortage of expensive melting scrap has made sponge iron a significant raw material for manufacturing high quality steel. For Price , specification and other details please contact us
