1. Size of concrete specimens for compression strength test Concrete cubic specimen: 150X150X150mm, 100X100X100mm, 200X200X200mm Cylindrical concrete specimen: diameter 150X300mm, diameter 100X200mm, diameter 200X400mm 2. Brief introduction of concrete compressive strength test procedure 1) Placing the concrete specimen---place the test specimen on the lower bearing block. Carefully align the axis of the specimen with the center of thrust of the spherically seated block. 2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete. 3.Relative test method GB/T 50081 standard for test method of mechanical properties on ordinary concrete ASTM C39 standard test method for compressive strength of cylindrical concrete ASTM E74 practice of calibration of force-measuring instruments for verifying the force indication of testing machine 4. Specifications for concrete compressive strength testing machine Max. capacity: 3000KN( lower or higher capacity can make to order) Grade of testing machine: grade 1 Distance between upper and lower compression platen: 320mm Stroke of piston:50mm Size of upper and lower compression platen:375X375mm Weight :about 900kg
200 tones in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for bricks, hallow or solid concrete blocks, using appropriate capacity machine. In general compression testing machine consists of a load frame with suitable platens and a pumping unit with pressure gauge, either hand operated or electrically-cum-hand operated. Load frame and pumping unit are connected by pressure pipes. Wooden packing
Supplier: Autoclaved aerated block making machines, complete plant manufacturing, supply and erection upto capacity 500 cubic meter per day,, flyash brick, paver block, concrete block, making machines and plants, dry mix mortor making machines and plants
Services: Brokers
Buyer: Mild steel, alloy steel, motors, gearboxes, bearings, hardware fasteners.
Supplier: Survey Instruments , Soil - Cement , Concrete , Aggregate , And Bitumen Testing Field Laboratory Glass Ware, Elastomeric Bridge Bearing & Madras Sand,total Station & Auto Level Gps Etc.;
Supplier: Soil test, cement test, asphalt test and test machine, wheel tracking machine, concrete and cement
Inductive Moisture Meter For Concrete Inductive moisture meter MS310 is used for measuring moisture content of wood ,Timber,paper,Bamboo,Carton ,concrete, textile and other materials.It applicable of woodwork,paper making , flakeboard, furniture ,building, timber traders and other relevant industry. Features: 1.1.It is portable, compact, easy to use and the moisture measurement readings are instant. 1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions. 1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient. 1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation. 1.5.Manual off at any time .Auto power off after 5 minutes from last operation. 1.6 Data hold function. Low battery alert. Specification Display:4 digital LCD Measuring range :0-99% Operation Condition: Temperature:0-60°C Humidity:5%-90%RH Resolusion:0.1 Accuracy: ± 0.5%n Power supply: 4x1.5 AAA size (UM-4) battery Dimensions:140mmÃ?60mmÃ?22mm Weight:119g (not including batteries) Material Species:20 kinds Guarantee:1 year
1. Introduction and test principle of compression strength measuring The compression testing machine is to measure compression strength of corrugated boxes in the situation of pressure and protect functions of packages for the objects filled in the packages. Test principle: (1) Corrugated boxes compression strength test, loading to the corrugated boxes using a compression testing machine at a certain constant rate untill corrugated boxes are broken or till certain load or displacement are reached. (2) Corrugated boxes stacking test, loading a certain force to the corrugated box using a compression testing machine untill corrugated box is broken or sustain a certain time period. When measuring deformation of corrugated box during compression test, an original load should be set as a datum point. The datum point can refer to the following chart: Average compression force(N)Original force(N) 101-200 10 201-1000 25 1001-2000 100 2001-10000 250 10001-20000 1000 200001-100000 2500 2. Functions of compression testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 3. Specification of compression testing machine 1 Max. Load 20KN 2 Resolution of test force 1/300000 3 Resolution of displacement 0.001mm 4 Precision of crossbeam displacement 0.5% 5 Precision of deformation 0.5% 6 Measuring range of test force 1%-100%FS 7 Relative error of test force 1% 8 Relative error at zero point 0.5% 9 Speed of crossbeam 0.01-500mm/min 10 Precision of crossbeam speed 1% 11 Speed range of load 0.005%-5%FS/s 12 Precision of load speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value 13 Speed of deformation 0.005%-5%FS/s 14 Precision of deformation speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value 15 Stroke of crossbeam 900mm 16 Effective tensile height 650mm 17 Effective test span 400mm 18 Effective compression height 800mm 19 Diameter of compression platen 100mm 20 Voltage and power 220V,50Hz, 700W 21 Dimension of main machine 650X450X1650mm 22 Weight of main machine about 300kg
Supplier: Construction equipments, surveying equipments & all accessories, soil testing, cement testing, concrete & bitumen testing equipments, chemicals for industries, water & sewage treatment plants, scientific equipments & all laboratory equipments
Services: Manufacturer
Supplier: J.steel, bricks, m.stone, cements, sand, concrete, pvc panels, ceiling items, plumbing equipments, electricity equipments, painting equipments, furniture items
