Jf-800( pvb031) bimetal bush Structure Metal backed with bronze graphite oilless bearings 1.Sinter bronze with graphite: good wear resistance with lower friction and excellent load carrying capacity. Bimetallic bushing can be machined after fitting to get precision tolerance. We also can supply the bearings with ptfe or graphite sprayed layer on the work surface to get much lower start friction. 2. Metal backing: gives exceptionally high load carrying capacity, excellent heat dissipation. 3.Copper plating 0.002mm, good corrosion resistance. Bearing surface The standard bearings we supply as plain surface, also we supply with cleaning grooves for small angular movements or in the presence of abrasive media or dirt, and indented surface for grease lubricated applications. Indented surface for grease lubricated applications. Cleaning grooves for small angular movements or in the presence of abrasive media or dirt. Application The special structure of the material suitable for hostile environments, for high load application which lubrication is difficult. Now jf-800 bimetallic bush has been widely used in water turbines, vane controls, injection molding machinery, packing machines, construction equipment, tire moulds, paper production machinery, furnace expansion plates, automotive transmission, heavy lifting chain linkage, food production equipment etc. Availability: 1. Standard cylindrical bushings, thrust washers and strips are availabe 2. Special designs are produced at short notice
Pvb-010 steel back self-lubricating bush (du bushing) Structure: 1.Ptfe/pb mixture 0.01~0.03mm as sliding layer, provides an excellent initial transfer film, which effectively coats the mating surface of the bearing assembly, forming homogeneous oxide type solid lubricant film. 2.Porous bronze 0.2~0.3mm, provides max. Thermal conductivity away from the bearing surface, also serves as a reservoir for the ptfe-lead mixture. 3.Low-carbon steel backing 0.7~2.3mm, provides fundamental structural support and gives exceptionally high load carrying capacity, excellent heat dissipation. 4.Tin-plating 0.005mm or copper plating 0.008mm, provides good corrosion resistance. Characteristics: Good wear and friction performance over a wide range of loads, speeds and temperature without oil Also perform well with lubrication Maintenance-free, long life Availability: Standard cylindrical bushing, flanged bush, thrust washers and strips are availabe Lead free type is also available All special designs are produced according to your requirement Applications: Lifting equipment, hydraulics and valves, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, construction equipment, meterial handing equipment, packaging equipment, automotive field, scientific equipment, drying ovens, office equipment, etc.
Jdb-10 brass alloy based solid lubricants bearing Structure: High strength brass alloy base+solid lubrcants Characteristics: Exhibits incomparable performance under a high load, low speed operation. Also perform well without lubrication, Excellent wear resistance in such places where an oil film is difficult to be formed due to reciprocating, oscillating motions and frequently intermittent operations Remarkable resistance to corrosion and resistance to chemical attack Maintenance free and save operating cost. Availability: Cylindrical bushing, flanged bushing, thrust washer and slide plate are standard fabrication. Special designs can be made according to your design. Application: Successive casting machine, mineral mountain machinery, shipping, steam turbine etc
Pvb-014 shock absorber bushes, reciprocating motion bushing Structure: 1.Ptfe with cooper 0.01~0.03mm 2.Porous bronze 0.2~0.3mm 3.Steel backing 0.7~2.3mm 4.Tin-plating 0.005mm or copper plating 0.008mm Characteristics: This type bush is efficient even under sudden break off the oil lubricating, wear Resistant, which can keep the lubricating oil clear after long period Of working. This bush can protect the mating surface from wearing. Particularly suitable for reciprocating movement. Availability: Standard cylindrical bushings, flanged bushings, thrust washers and strips are availabe Special designs are produced at short notice Lead free type is also available Applications: Particularly apply for reciprocating movement products, such as shock absorber of automobiles & motorcycles, pneumatic cylinder and so on
Pvb090(fb090) wrapped bronze bushes, flanged bushing Material: Cusn8p Characteristics: Surface can be incorporated with spherical of diamond shaped indentations or oil grooves linear, oscillating and High load capacity and long life Cheap than traditional bronze bush, cost saving Availability: Standard cylindrical bushings, thrust washers, flanged bushing and strips are availabe Special designs are produced at short time Applications: Hoisting machines, construction machines, automobiles, tractors, trucks, machine tools and some mineral engines.
Sleeve & Bearing & Bushing Rock Metal offers a wide selection of sleeve & bearing & bushing. They are simplest design of bearing, sleeve-shaped. They are usually found in applications that use rotating or sliding parts. They are made from a range of materials: sic, carbon, tc, ceraic, stainless steel, etc
Bimetallic and Trimetallic steel backed copper / lead bearings with overlay plated from sintered process for all type of engine application Lot size 50 to 100
Chaoyang Runxing Heavy Machinery Manufacturing Co.,LTD was established in 2005.The factory area is located in Dongsanjia Industiral Park, Chaoyang Development Zone.Covering an area of 10,000 square meters, the company has 30 employees, including 3 senior titles, 5 intermediate titles and 10 professional and technical personnel. Our main products are babbitt bearings, bearing bushings and plain bearings.The products cover construction machinery, heavy machinery, electric power, metallurgy, mining and other machinery manufacturing enterprises, not only equipped with equipment of Chinese electromechanical enterprises, but also exported to Europe, Asia, Africa and the Americas.Our factory has independent alloy casting technology and processing technology as well as a reliable quality assurance system.Under the trust of users, products occupy a place in the same industry.In 2018, we invested 10 million yuan to purchase a hobbing machine with a maximum diameter of 8 meters and an 8-meter vertical car to meet customer needs and reduce costs.
P330:pressures to 3500 psi, flows to 64.8 gpm. Three-piece ci construction, low-friction bushings provide strength, high efficiency, long life in severe operating environments & optimized performance in high temp/low viscosity conditions. Bushing bearing pumps include the 315, 330, 350 and 365 models. Features: Continuous pressures to 245 bar (3000 psi) Three-piece cast iron construction Balanced thrust plates minimize friction and leakage Internal passage constantly lubricates bushings Heavy-duty applications Extended studs available for mounting support Single, multiple [up to 6 pumping sections], piggyback and thru-drive assemblies Applications: Material handling Turf care Agricultural Construction equipment Available valve options: Pressure relief valve Load sense unloading relief valve (lfsc bolt on valve) Priority flow divider Load sense priority valve Trade names: bushing bearing gear pumps are also marketed under the commercial, tyrone and ultra brand names.
