Laser-Optimized Multimode Fiber Aqua Cord features 50/125-micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs, and routers as well as higher end networking equipment. This LC-LC patch cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration. Each Duplex 50/125 (OM3) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability and is backed by our lifetime warranty.
Polarization Beam Splitter is designed to divide one beam of any polarization into the two beams of the polarization vertical to each. The optical route is from one fiber to two fiber.
Company introduction:
a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+, and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration.
Fiber mode sm mm
Type fc sc st fc sc st
Diameter (mm) ¦0.9 ¦2.0 ¦3.0
End-face finishing pc upc apc pc upc pc
Insertion loss (db) _0.20 _0.30 _0.20 _0.40
Return loss (db) 45 50 60 45 50 35
Exchangeability (db) _0.20
Repeatability (db) _0.10
Operating temperature(¦) -40 to +75
Storage temperature(¦) -40 to +85
Operating wavelength 1310, 1550 nm
Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.
OMCs Patch cables are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.
Connectors Standard:
SMA: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.
Features
1.100% pre-terminated and tested in factory to ensure transfer performance.
2.Rapid configuration and networking, reduce installation time.
3.Supports 40G and 100G network applications.
4.Low insertion loss and added loss.
5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available.
6.High back loss, small volume, light weight.
7.End-face geometry and quality superior than IEC and Telcordia standards.
Optical Terminal Box (OTB) is mainly used for connecting the indoor optical cables, optical patch cords and optical pigtails. It can be wall mounted, facilitates the test and refit of the lines.
The 9/125µm single mode fiber patch cable meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling.
Spring also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc.
ConnectorLC to LCJacket OD2.0mm
Fiber Mode9/125µmJacket ColorYellow
PolishUPC to UPCWavelength1310/1550nm
Fiber TypeDuplexJacket MaterialPVC
Insertion loss=0.3dBInterchangeability=0.2dB
Return loss=50dBVibration=0.2dB
Operating temperature-40~75°CStorage temperature-45~85°C
PolarityA(Tx) to B(Rx)Fiber GradeG652D
Dimension (cm): 49(W)x30.5(L)
Height: 1U, 2U, 3U, 4Uâ?¦.. according to cores
Weight (kg): according to cores.
Capacity: 12 cores, 24 cores, 36 cores, 48 cores.
Draw able trays inside changeable
various panel plates to fit different adapter interface
Standard size, can be used in 19'', 21'' standard distribution frame.
