Model names lpr1218 Description 18w rgb dmx indoor led par light Feature advanced led technology, popular using in world. Extremely long life (rated 60, 000 to 100, 000 hr.) very low power consumption, no duty cycle runs all light. Super bright for indoor use.Built-in automated programs via stand alone mode by menu button. Individual control of red, green, blue and white leds 0-100% strobe; 0-100% dimmer via dmx mode. Rgb, macros, run/strobe speed, automatic/sound, dimmer. Static colors and rgb color mixing with or king Power supply bi-voltage 110v to 220v-250v, 50/60hz, 120w, 3a Led light size mm
voltage: ac110v-130v/200v-250v, 50hz-60hz/ fuse: 2a/250v rated power: 28w led light: 252pcs diodes, (red:84pcs, green:84pcs, blue:84pcs) working modes: dmx, sound active, auto, master-slave dmx control channel: 7 channels 4 selectable dmx channels: 2chs, 4chs, 13chs, 25chs. led beam angle: 30 degrees led section: 4 sections lighting effects: dimmer, flash, fader, sectional, wall washer digital display 3 pin male & female xlr interface power jack with male and female for linking up to 10 lights into one main power source light body: plastic working condition: indoor use only net weight: 2.5kg gross weight: 3.0kg item size: 108*12*12cm inner box: 1095*115*120(0.015m⊃3;), carton: 1110*365*279(0.113m⊃3;), 6pcs/carton
Color : red, green, blue 1) led disco light, stage led lighting 2) 3w*48pcs rgb 4 viewer spot color change led light (7) 25 beam angle of each led (8) 2 arms can swing (each arm with 2 viewers) (9) 4 digit led display pcs rgb led, total power 144w total 4 viewers, each viewer 12pcs rgb led diodes. (16pcs red, 16pcs green, 16pcs blue) = 4x (4pcs red, 4pcs green and 4pcs blue) Play modeSound active, auto, dmx, master/slave dmx channels: 11 Interface3 pins xlr jack for dmx or maser-slave linking Power supplyBi-voltage 110v to 220v-250v, 50/60hz, 90w, 3.6a Led light size480*190*510 mm (lwh) Net weight7.3kg Gross weight8.6kg (inner box), kg (outer box) Volume weight11.4kg (/5000) or 9.5kg(/6000), each inner box 24.7kg (/5000) or 20.6kg(/6000), each outer box Inner box575*430*181(0.045m⊃3; ) Outer box590*445*401(0.11m⊃3; ), 2pcs/carton AccessoriesIncluded: user¡¡¥ s manual power supply cable (uk, usa, euro, aus, brz). Applicable placeDjs, bands, bars, pubs, clubs, ktv, family party, etc. CustomizedOem, odm
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
RGB series is a high quality multi-color cartoon laser light. with sound activated,automatic.DMX.PC control. adjustable pattern size, remote control and download images functionality . The maximum 5000 graphics and characters can be stored , which can be circularly and work under remote control on demand. * 16-channel DMX-512 controlled green, blue cyan,yellow,red, magenta,white effect laser * Programmable pan, tilt and zoom with separate X, Y, and Z rolling effects *5000 built-in pattern selections each with adjustable parameters,cutomized patterns * Built-in automatic programs via master/slave or DMX * Built-in sound activated programs via master/slave or DMX * Complies with CE ,ROHS standards * 0.5W-10W laser diode(option) * Remote control ,ILDA PC software port,LCD panel. * Brightness and pattern size adjustable,SD card. Meas:460*320*170mm 500*250*200mm(optional) N.G/G.W: 6.5kg-8kg 15kg-17kg(optional)
Power:3w/10w, Wavelength:355nm, Pulse frequency:20khz~120khz, Marking area:50*50mm, 70*70mm, 100*100mm, 110*110mm optional, Cooling mode: air cooled, Beam diameter:0.015mm, Power consumption:700w, Diemensions:1000mm*860mm*1260mm, Weight:190kg
Power:3w/10w, Wavelength:355nm, Pulse frequency:20khz~120khz, Marking area:50,50mm, 70,70mm, 100,100mm, 110,110mm optional, Cooling mode: air cooled, Beam diameter:0.015mm, Power consumption:700w, Diemensions:1000mm,860mm,1260mm, Weight:190kg
China Fiber Laser Cutting Machine Laser Cutting Machine Factory CX-T series intelligent laser cutting equipment is a special machine tool that uses laser technology to cut various graphics on pipes and profiles.With professional, high speed, high precision, high efficiency, high cost performance, etc. it is the ideal equipment for the non-contact metal pipe processing industry. Advantages 1.Tube clamping and positioning: Both front and rear chucks use pneumatic chucks, one-button automatic centering, dual-drive rotation to ensure front-to-back rotation synchronization, short strokes, high efficiency, and no deformation of thin plates; ultra-short tailing: ultra-short Tail material processing, reducing raw material cost, lower cost, more possibility of driving; 2.power-off and continuous cutting: importer high-torque absolute value encoder servo motor ensures high speed and acceleration of the whole machine and has power-off continuous cutting function , Worry-free power failure, one-click reply cutting. Specification Model CX-T series fiber laser cutting machine Machine Type CX-6020T Pipe processing diameter range 20-220mm Pipe processing length 6300mm X-axis travel 6600mm Y-axis travel 250mm Z-axis travel 185r/min Maximum speed of axis A 110r/min Maximum speed of axis B 110r/min Maximum speed of X and Y axis 105/30m/min X, Y-axis Maximum acceleration 0.8G Positioning accuracy of X and Y axis 0.05mm/m Repeated positioning accuracy of X and Y axis 0.03mm Blanking length 3000mm System Pachul FSCUT5000D Laser power 1000W-4000W Optional Maximum acceleration (X,Y axis linkage) 1.3G Maximum moving speed (X,Y axis linkage) 105m/min positioning accuracy ±0.03mm/m Repeated positioning accuracy ±0.02mm Overall weight 6000KG Overall size (length x width x height) 8000mm 3300mm 1950mm Positioning accuracy of X and Y axis 0.05mm/m Repeated positioning accuracy of X and Y axis 0.03mm Applicable Industry of 4000w Fiber Laser Cutting Machine Fitness equipment, smart furniture, petroleum pipelines, passenger car manufacturing, engineering machinery, shelf containers, agricultural and forestry machinery, cloud ladder fences, home appliance manufacturing, laser external processing services and other machinery manufacturing pipe processing industries and so on.