What Is Thermal Oil? Thermal oils or thermal fluids are heat transfer mediums that are consumed to transfer thermal energy in those solicitations or methods where high temperatures are essential. One of its core applications is diffusing heat from the industrial burner boiler or industrial biomass boiler to the variant industrial procedures that involve heat. Operational Benefits Of Thermal Oil Thermal oil is a thermal fluid whose consumption ranges to a great digit of industrial sectors. Here are what we deliberate to be some wide-ranging benefits of using thermal oil: Modest and precise temperature control Very low maintenance price We avoid oxidization complications Rapid start-up and stop Very simple operation (Does not require certified operator) Does not involve water or chemical treatment, maintenance of steam purgatives and condensate lines No leakage costs Safer operation fewer safety essentials required Low freezing point No heat losses due to purgatives, no loss of condensate. Thermal Oil Applications Thermal oils as a thermal fluid are used in an extensive range of submissions, and industries where high temperatures are essential. Some of the key industries in which these thermal oil thermal transfer systems are utilized are the following: Chemical Industry Wood Industry Textile Industry Food Industry Plastic or Rubber Industry Marine Applications Gas and Petroleum Production Machining of Metals, Paper and Cardboard Construction Materials Laundry Industry
This is a full synthetic lubricant based on carefully selected very high quality base oils and high quality additives of the latest generation, specially designed to meet the strict requirements of manufacturers. This provides an excellent fluidity at low temperatures, a very low resistance when starting, an exceptional viscosity index and a very high thermal stability.
Powergear SP ISO VG 100/ 150/ 220/ 320/ 460/ 680 range of oils have been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication such as industrial� gear oils operating under� severe duty. The oils are formulated from minerals base stocks and additives such as sulphur and phosphorus compounds to satisfy the widest range of operational requirements. APPLICATION Powergear SP Oils are recommended for lubrication of all types of industrial gears especially where operating conditions involve heavy loads, high pressure, high speed and high relative sliding velocities at elevated ambient and operating temperatures. Benefits Thermal and oxidation stability permitting continuous use at operating temperatures as high as 100 C. Grand demulsibility for rapid water separation. Excellent corrosion protection. Good anti-wear and EP properties. Long operating life.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package. These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants. The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant. Applications and Compressor Type Propylene Refrigeration Oil-flooded rotary screw compressors Liquid ring vacuum pumps Other applications requiring an oxidative and thermally resistant lubricant Features and Benefits Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems Oxidatively stable Longer system life Low volatility Reduced maintenance, reduced top-up High viscosity index Wide temperature range of operation Excellent lubricity Increased efficiency, reduced cost of operation
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
TARGET 4500 CF-4 engine oils are blended from highly refined base stocks and selected additives to provide excellent detergency, dispersancy, and anti-wear properties. The High Base Number provides superior level of reserve alkalinity to protect vital engine parts against corrosion and premature engine wear. They offer longer drain capabilities in high output turbo-charged Diesel engines operating under severe service conditions. APPLICATIONS TARGET 4500 CF-4 oils meet the requirements of most high-speed Diesel and gasoline engines of mixed fleets. Recommended for commercial road transport, high RPM Generator sets and sea transport. BENEFITS TARGET 4500 CF-4 engine oils reduce piston deposits, provide protection against cylinder bore polishing, reduce oil consumption, reduce filter plugging, offer very low oxidation and consequent thickening due to high TBN levels present which neutralize corrosive acids resulting from oxidation. PERFORMANCE STANDARDS SAE 20W50 API CF-4 TYPICAL KEY PROPERTIES TARGET 4500 CF-4 20W/50 Kinematic Viscosity @100C, cSt ASTM D445 : 19.5 Viscosity Index ASTM D2270 : 125 Flash Point (COC), C ASTM D92 : 225 Pour Point, C ASTM D97 : -21 Total Base Number, mgKOH/g ASTM D2896 : 13 Sulphated Ash%Wt ASTM D874 : 1.4 Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions. APPLICATIONS TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars. BENEFITS Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars. Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection. Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions. * Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment. * Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures. * Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade PERFORMANCE STANDARDS SAE 5W-30 API SN/CI-4
DESCRIPTION * TARGET EP GEAR OIL GL-5 oils are designed for use in industrial and automotive gearboxes and general lubricating systems. These are multi-purpose extreme pressure sulphur based oils with EP additives, blended with special inhibitors to increase aging stability and anti-corrosion properties. TARGET EP GEAR OIL GL-5 gear oils have a high persistence to break down under mechanical loads and help minimize wear under heavy and shock load conditions. APPLICATIONS Suitable for manual transmissions, transaxles in automotive gears, particularly hypoid gears in passenger cars. Suitable for all equipment operated under high speed/low torque and low speed/high toque conditions. Ideal for gear sets on tractors and agricultural equipment, track rollers of crawler tractors and a variety of industrial applications. PERFORMANCE STANDARDS API GL-5 SAE 85W140, 80W90 US MIL L-2105D BENEFITS TARGET EP GEAR OIL GL-5 oils exhibit excellent resistance to aging and oxidation, thus prolonging service intervals. They provide excellent protection against corrosion of steel as well as non-ferrous metals and possess superb anti-wear properties. They also offer excellent shear stability as well as provide rapid air release. These gear oils have good demulsifying properties and offer increased lubricant life. Minimum Order Size : order size must be one container Packaging details - flexi bag, bottles
