ARG 100 is a hydrolytically stable Silicone polyether surfactant, which can be used in wide range of applications in Paints, Agriculture, PU Foams, Textile, Petroleum Refineries, Detergents, Automotive and Household cleaning products, due to its excellent surface property (surface tension below 22 dynes/cm). SS ARG 166 is used as emulsifier in Textiles and other applications. SS ARG 110 is a Super Wetting and Spreading Agent, which have a low molecular weight nonionic silicone surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals SS ARG 210 All purpose cost effective Spray Adjuvant , which on mixing with insecticides, fungicides, herbicides and other agriculture chemicals increases their penetration, spread and efficiency.
Polyquaternium-51 INCI Name: POLYQUATERNIUM-51 Molecular Formula: C19H36NO8P Molecular Weight: 437.47 Appearance: Colorless transparent liquid Purity: 98% CAS NO.: 125275-25-4 EINECS No.: 433-120-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Polyquaternium-51 (Polyquaternium-51) chemical name: methacryloxyethyl phosphorylcholine-n-butyl methacrylate, is a synthetic bionic material of cell membrane structure, with phospholipids in the cell membrane The polar group of acylcholine is a copolymer composed of 2-methacryloyl hydroxyethyl phosphatidylcholine (MPC) and monomeric hydrophobic butyl methacrylate. Polyquaternium-51 has super moisturizing properties, its moisturizing properties are twice that of hyaluronic acid, and can alleviate the irritation of surfactants, so it is widely used in cosmetic moisturizer raw materials and medical aesthetics. Polyquaternium-51 is an efficient and mild moisturizing factor with excellent water-locking and moisturizing properties. It can effectively lock the moisture of the skin and hair, and its moisturizing properties will not be reduced after multiple washings. After the product containing polyquaternium-51 is applied, its ingredients can form a respirable biofilm on the surface of the skin, which simulates the stratum corneum to give the skin an extra layer of protection, effectively inhibits the irritation of surfactants on the skin, and can Improve rough skin, smooth and delicate skin, and enhance the skin's absorption of active ingredients.
Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous. Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance. Methyl Hydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates & fibers where water repellent or hydrophobic properties required. Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle. Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. Poly Urethane release Agent (SS-PU) Release Agent has been specially formulated as a semi permanent release agent in a wide range of applications, including:• Polyurethane Release: particularly polyester type, polyurethane shoe sole, Microcellular automotive parts and furniture (integral skin), Automotive parts: bumpers, crash pads, dashboards.
Potassium methyl siliconate (Aquarest WR 100) is an aqueous solution of Potassium methyl Siliconate, Water dilutable. It provides water repellent properties by reaction with atmospheric carbon dioxide. Silane Siloxane Base coat (Aquarest WR 1000) It is suitable for coating painted surfaces too, as this does not impart any color change to the substrate. Forms an excellent weather coat for all types of cement and stone surfaces. Reactive Silicone based (Aquarest 1200) is a solvent soluble fast curing reactive silicone, used for imparting a colorless water repellent surface finish for variety of industries. Reactive Silicone emulsion (Aquarest 1300) is reactive Fluid emulsion water soluble especially designed for treating substrates to impart and improve water repellent properties. Silane based water soluble (Aquarest WR 1100) is a solvent less, water- soluble, Silane Siloxane Emulsion. Dilute solutions of SS WR 1100 serve as general-purpose water repellents for impregnating and priming mineral surfaces. Rust remover and Protective lubricant (SS WRC) is a speciality silicone lubricant for rust loosener and remover, water repellent for metal and also used for protection from corrosion.
SS AF is General purpose Antifoam – Defoamer Emulsion to provide effective antifoaming and defoaming solutions in aqueous systems for variety of industrial applications. SS AF 5730 & 5520 is an excellent Antifoam Emulsion specially designed to control form in high temperature (over boil) and broad pH range ( 4-10) in aqueous systems. SS AF 700 Powdered Antifoam been developed to control the foam generated during process or using Powder Insecticides, Pesticides, Detergents and Fertilizers.
SS ARG 110 is use as an Adjuvant refers to the use of this product as an additive to a pesticide for the purpose of enhancing the pesticide’s effectiveness for wetting more of the leaf surface (delivering the pesticide to a greater surface area for increased leaf penetration) and thereby providing rain fastness. i.e., herbicides are not washed off by rainfall because they have penetrated into the plant surface. Enhances the performance of agricultural chemicals, especially water-soluble broadleaf herbicides, insecticides, fungicides and plant growth regulators
Polyquaternium-7, cationic quaternary ammonium synergistic polymer surfactant, appearance is colorless to pale yellow viscous liquid. Easily soluble in water, safe, good hydrolytic stability, and strong adaptability to pH changes. It has excellent wettability, softness, and film-forming properties, and has obvious effects on hair conditioning, moisturizing, gloss, softness, and smoothness. It has good compatibility with water and anionic and non-ionic surfactants and can be used in detergents to form multi-salt complexes, which can increase viscosity. 1.Polyquaternium-7, used in hair conditioners, can greatly improve the modifiable and conditioning of hair. After shampooing, it can make the hair shiny, soft and easy to comb, so that the hair has good wet and dry combing. And anti-tangling. 2.Polyquaternium-7, used in skin care products, is a very effective smoothing and lubricating agent, used in hydroalcoholic tanning detergents, can produce a non-sticky, non-greasy smooth residual film on the skin. 3.Polyquaternium-7, used in soap and other industries, can reduce the swelling of soap substances in water, improve crack resistance and foaming properties, thereby significantly improving product quality. 4.Polyquaternium-7, used in shaving cream, can produce rich, creamy, long-lasting foam, reduce shaving and make the skin soft and smooth
Description: Polyquaternium 10 (PQ-10) is a cationic surfactant, it can be used in skin care to keep the skin moist, prevent the skin from freezing and cracking, and make the skin smooth and soft. When used for hair, it has repairs hair split ends, and forms a transparent, continuous film on the hair. It provides excellent moisturizing properties, improve damaged hair, excellent feel after using on skin, improve anti-ultraviolet ability of the skin, excellent moisturizing properties. Product Feature: â?¢ Repair the split ends of the hair, improve the softness, smoothness and antistatic properties of the hair. It has good compounding properties and has a good thickening effect on shampoo and hair care products. It has been widely used in the cosmetics industry. â?¢ It has excellent conditioning, antistatic, repair damaged hair, make hair soft, smooth, and elastic. â?¢ It can also reduce the irritation of detergent to the skin. Product Application: â?¢ It can be used in high-grade liquid soap, foam bath, shower cream, transparent or pearl shampoo, facial cleanser, shaving cream, lotion, sunscreen, styling mousse and conditioner.
PRODUCT NAME: Agricultural Silicone Trisiloxano adjuvant TEST ITEM SPECIFICATIONS INSPECTION RESULTS Appearance light amber liquid light amber liquid Viscosity, 25°C,mm2/s 20-61 30 Surface Tension, 25°C,mN/m 20.0-23.0 21.3 Specific Gravity, 25°C, g/cm3 1.001-1.050 1.015 RRESULTS: Up to the standard whatsapp/tel/ 8614707090699 QS-308 spray adjuvant is a super-spreading surfactant based on a trisiloxane ethoxylate. QS-308 spray adjuvant lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants. Typically, QS-308 spray adjuvant (@ 0.1 wt %) gives an aqueous surface tension of