PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
PTFE Adhesive Tapes PTFE Fiberglass Adhesive Tapes PTFE skived fim tape is another type of PTFE adhesive tapes, which is skived into even thin film from a cylindrical PTFE block. During the skiving, the block was fixed and rotate with a high speed, and the sharp blade will shave it into even thin film on a continuous basis. Product Description Color: Grey Popular Thickness: 0.13mm 0.18mm Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Process of PTFE skived film tapes manufacturing: Once the PTFE film has been skived from the PTFE(Teflon) block, it will be chemically treated or etched, which will remove the fluorine surface by creating a new sodium surface. Then the heat resistant adhesive will be allowed to bond PTFE film, resulting in PTFE Skived Tapes. Difference of PTFE skived film tapes: PTFE Skived film tape and self adhesive PTFE tape can both resist heat, has non stick surface and is chemical & UV resistant. But due to PTFE skived film is 100% Pure PTFE, so the property is different. The PTFE skived tapes is more thinner, usuall used for electronics industry, Application of PTFE skived film tapes: Its high elongation makes the tape useful in applications that require conformability. The combination of skived PTFE and silicone adhesive offers an effective solution in high temperature and high dielectric applications. Techbelts Skived PTFE tape provides superior wear resistance, low friction and a non-stick surface. Applications Areas of use include mechanical applications such as electrical insulation and cable wrapping, bellows and hose liners, gaskets, tank and vessel lining, slide bearings, skid ways, pipe support and bearing tape. They are also used in many other applications requiring high temperature resistance, low friction and a non stick surface. involved in the manufacture of PTFE coated fiberglass fabric, PTFE adhesive tapes, PTFE mesh conveyor belts, and silicone coated fabric etc, which provides a new solution for various industrial machines, such as packaging, printing, textile and dyeing industries.Click here to subscribe
Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. Thermal stability PTFE is one of the most thermally stable plastic materials. There are no appreciable decompositions at 260�°C, so that PTFE, at this temperature, still possesses most of its properties. Appreciable decomposition begins at over 400�°C. Specification: from 200D to 2500D in 2ply,3ply and multiply
Specifications: 100D/2,3, 200D/2,3, 400D/2,3, 500D/2,3; 800D/2,3; 1000D/2,3, 1500D/2,3 ,2000D/2,3; 2500D/2,3; 2800D/2,3 multiply. Make-up: 200Gms/spool, 500grms/spool, 1000gms/spool, Color: Natural, Dyed colors,
HIS-938G is general purpose tape based on polyester film with silicone adhesive and designed for high temperature masking and splicing. The tape has features such as excellent heat resistance, dielectric strength, good peel strength. It can be removed cleanly after use without adhesive residue.
Supplier: Plastic scrap (ldpe, pp, pvc, pet, pmma, hdpe, bopp, pe, ps, abs etc)., textile waste (cotton hosiery clips, cotton thread waste), denim, unbleached, selvedges rama string, rags for mattresses, wiping rags, licekrin dropings 100% cotton bales, card fly etc.) paper scrap
PTFE Sewing Thread for Filter Bags Sewing The PTFE sewing thread has the characteristics of acid and alkali resistance and various organic solvents, and is almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is extremely low. Function High temperature resistance - use working temperature up to 250 �°C. Low temperature resistance - good mechanical toughness; 5% elongation even at temperatures down to -196 �°C. Corrosion resistance - It is inert to most chemicals and solvents, resistant to strong acids and alkalis, water and various organic solvents. Weather resistant - has the best aging life in plastics. High Lubrication - is the lowest coefficient of friction in solid materials. Non-adhesive - is the smallest surface tension in solid materials and does not adhere to any substance. Non-toxic - physiologically inert, long-term implantation of artificial blood vessels and organs without adverse reactions. Electrical insulation - resistant to 1500 volts high voltage.
Product’s name: Injection mold Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding. We also undertake injection, blow or rotary molding works from Toys to Big bins or water tanks, floating docks, road barrier etc. We can do custom design plastic parts or components. Water Tanks ( Roto Molding process)
Jerry Can ( Blow molding Process) Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.