Sio246.3 % Al2o336.8 % Fe2o30.9 % Tio20.3 % Cao0.2 % Mgo0.2 % L.O.I14.1 % Na2o30.32 % K2o0.16 % Brightness77.50 % Whiteness75.00 % to 80.00 % 50 kg. Hdep bags 25 kg. Hdep bags 1 mt jumbo bags
Silica flour or quartz Sio2(silicon dioxide) 99.69% Fe2o3(iron oxide) 0.025% Al2o3(aluminum oxide) 0.200% Cao(calcium oxide) 0.025% Mgo(magnesium oxide) 0.005% Tio2(titanium dioxide) 0.060% Na2o(sodium oxide) 0.030% K2o(potassium oxide) 0.013% L.O.I.(loss of ignition) 0.260% 25 kg. Hdep bags 50 kg. Hdep bags 1 mt jumbo bags
We offer a wide range of Soda Feldspar.
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
Potash Feldspar Lumps :- K2O - 10% + Na2O - 2% + Fe2O3 - 0.1% Al2O3 - 17% - 18% SiO2 - 65% - 70% Lumps Size - 1 cm to 20cm Packing - Loose
Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.
Applications: In glass making In ceramics production
Supplier: Talc, mica, fly ash, bauxite, calcined bauxite, potash feldspar, quartz, sand, silica sand, micro silica, silica fume, bentonite, bleaching clay, ball clay, ethyl acetate
