CM-8Y1 semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment, easy and safe to operate. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 0.1-2 Theoretical output PCS/H 600-800 Preform length mm 15-350 Preform inner diameter mm ª+5-38 Moulding Max.mould plate Dimenstion(L x W) mm 350x380 Max.mould thickness mm 180 Clamping force KN 45 Mould opening stroke mm 16 Machine size and weight Main machine (L x W x H) cm 160x60x161 Main machine weight Kg 500 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 17.5
íícm-9b semiautomatic bottle blow molding machine is suitable for producing pet plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould , heavy locking mould, stable and fast , adopt infrared oven to heat the perform , the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi- auto mode. The machine is small with low investment, easy and safe to operate by one person. Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 5-10 Theoretical output pcs/h 300-500 Preform length mm 15-460 Preform inner diameter mm ª)15-200 Moulding max.Mould plate dimenstion(l x w) mm 470x500 Max.Mould thickness mm 370 Clamping force kn 100 Mould opening stroke mm 350 Machine size and weight main machine (l x w x h) cm 193x72x183 Main machine weight kg 800 Heater (l x w x h) cm 187x63x145 Heater weight kg 250 Power kw 17.5 Wooden packing
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Reasonable design, full automatic control, save power and labor. Adopt high quality components, Feeding system carries the performs by robot automatically. Infrared oven heater adopts the quartz lamp to heat the PET tube. Fully automatic process with low investment, high efficiency ,quick and safe operation ,easy for trouble -shooting , maintenance and other benefits. We have perfect service after sales . Main part Pneumatic part valve Smc cylinder Electric part PLC LG /Mitsubishi Operation system LG /HITECH relay OMRON ++¦+ Infrared thermometer ++¦·++¦¬America raytek Note All of the electrical components adopts CEíóULíóCCC aproved international advanced high-tech product
Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 10-25Lú¿3-5 Gallon Theoretical output PCS/H 90-180 Preform length mm 15-460 Preform inner diameter mm ª+15-200 Moulding Max.mould plate Dimenstion(L x W) mm 420x500 Max.mould thickness mm 40 Clamping force KN 330 Mould opening stroke mm 38 Machine size and weight Main machine (L x W x H) cm 218x77x196 Main machine weight Kg 1000 Heater (L x W x H) cm 237x68x165 Heater weight Kg 380 Power kw 40
Rotary blowing method: professionally designed robot sends preform and takes bottle out automatically and accurately. Convenient operation system: Through touching screen operation, it can be changed frequently to adjust the parameter and have the widely operation. Automatic controlling: adopting precise and swift PLC controlling, it has the features of high precision and swift reaction. Blowing air system: specialized designing of three-work-place and multi-work-place combination valve makes blowing and pulling steady and precise and also keep the blowing effect in a pace all the time. Mould and replacement: specialized designing of enough tons of lock-mould system and swift load-load-mould structure.It has reliable installation and swift replacement . Heating device: The intelligence numerical control, feeds back the compensation system automatically,it can show enough the degree and quality of preform heating and keep the bottle mouth protection and cooling heating interchange horizontal line in accordance all the time. Namely ensure the product quality and reduce the production consumption thoroughly Low noisy sound :reducing-sound machine system, which is designed of circle close and single-path Features that can sight: the whole production procedures and machine's components can be observed through the transparent windows the operator can master the production and machine's running case at any time and it's good for maintenance of normal production and safety running machine.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment , easy and safe to operate. This machine can producing PET bottle which can resist high temperature, such like 92 centigrade degree. This has solved the problem of the traditional juice and other liquid food packing. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 0.1-2 Theoretical output PCS/H 600-800 Preform length mm 15-350 Preform inner diameter mm ª+5-38 Moulding Max.mould plate Dimenstion(L x W) mm 350x380 Max.mould thickness mm 180 Clamping force KN 45 Mould opening stroke mm 16 Machine size and weight Main machine (L x W x H) cm 160x60x161 Main machine weight Kg 500 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 24.8
CM-9B semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi- auto mode. The machine is small with low investment, easy and safe to operate by one person. Main parameterú¦ TYPE ITEM UNIT PARAMETER Container Product material / PET PP PE Volume L 5-10 Theoretical output PCS/H 300-500 Preform length mm 15-460 Preform inner diameter mm ª+15-200 Moulding Max.mould plate Dimenstion(L x W) mm 470x500 Max.mould thickness mm 370 Clamping force KN 100 Mould opening stroke mm 350 Machine size and weight Main machine (L x W x H) cm 193x72x183 Main machine weight Kg 800 Heater (L x W x H) cm 187x63x145 Heater weight Kg 250 Power kw 17.5
Cm-8y semiautomatic bottle blow molding machine is suitable for producing pet plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle , mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Adopting double crank to adjust mould , heavy locking mould, stable and fast , adopt infrared oven to heat the perform , the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment, easy and safe to operate . Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 0.1-2 Theoretical output pcs/h 1200-1600 Preform length mm 15-350 Preform inner diameter mm ª)5-38 Moulding max.Mould plate dimenstion(l x w) mm 350x380 Max.Mould thickness mm 180 Clamping force kn 45 Mould opening stroke mm 16 Machine size and weight main machine (l x w x h) cm 160x60x161 Main machine weight kg 500 Heater (l x w x h) cm 187x63x145 Heater weight kg 250 Power kw 17.5 Wooden packing
Rotary blowing method: professionally designed robot sends preform and takes bottle out automatically and accurately. Convenient operation system: through touching screen operation, it can be changed frequently to adjust the parameter and have the widely operation. Automatic controlling: adopting precise and swift plc controlling, it has the features of high precision and swift reaction. Blowing air system: specialized designing of three-work-place and multi-work-place combination valve makes blowing and pulling steady and precise and also keep the blowing effect in a pace all the time. Mould and replacement: specialized designing of enough tons of lock-mould system and swift load-load-mould structure.It has reliable installation and swift replacement . Heating device: the intelligence numerical control, feeds back the compensation system automatically, it can show enough the degree and quality of preform heating and keep the bottle mouth protection and cooling heating interchange horizontal line in accordance all the time. Namely ensure the product quality and reduce the production consumption thoroughly Low noisy sound :reducing-sound machine system, which is designed of circle close and single-path
Cm-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is widely used to produce any shape of plastic from pet with neck finishes from 15mm-200mm. Perfect function with economic investment. Small size and compact construction with no space waste. Easy to operate and maintain , operation by one person . Saving power and uneasy to worn out , adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system. We can provide performs and various bottle& cap molds for 5 gallon and 3gallon bottles to meet customer»s requirements. Main parameterú¦ Type item unit parameter Container product material / pet pp pe Volume l 10-25lú¿3-5 gallon Theoretical output pcs/h 90-180 Preform length mm 15-460 Preform inner diameter mm ª)15-200 Moulding max.Mould plate dimenstion(l x w) mm 420x500 Max.Mould thickness mm 40 Clamping force kn 330 Mould opening stroke mm 38 Machine size and weight main machine (l x w x h) cm 218x77x196 Main machine weight kg 1000 Heater (l x w x h) cm 237x68x165 Heater weight kg 380 Power kw 40
