Supplier: Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions.
Services: Shipping and transsportation
Buyer: Pvb layers, float glass, aluminium billets, aluminium rolls, galvanized rolls, machinery production lines of relevant products.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
We have two type of Lab machine: Lab22 and Lab30 with three type cutting system: strand, water ring and air cooling die face cutting. Salient Features of co-rotating twin screw extruder Lab22: 1) Main motor 4kw, L/D=42 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 5~15kg/h 5) One mixer, one main feeder and one side feeder 6) Strand cutting unit with water bath, air blower, pelletizier and classifier; 7) Control panel, soft water cooling system and vacuum system are inside the base of extruder. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
Brand: Jinhailuo material:38CrMoAlA stretching film
We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments. Salient Features of co-rotating twin screw extruder EC52: 1) Main motor 55kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 150~200kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on. Salient Features of co-rotating twin screw extruder SAT65: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-400rpm 4) The output capacity: 150~250kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Air cooling die face cutting system with cyclone and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min. Wooden case or other moistureproof packages
Feature: This line produces PET sheet for formed packaging of a huge range of items such as toys, stationery, paneling, logo plates, arts and crafts, etc.. Special screw structure design to ensure plasticizing efficiency without any spots; No special dry require, can do 100% recycle material Compatible with PET, APET, PETG, CPET mixing; Quantative bar to ensure continued and stable output Filter changing without shut down On line silicon oil and destatic device available Super color touching screen, friendly user interface and easy to operate; Adopt BECKHOFF Industry computer bus system and windows XP2 system with excellent alert system. Specifications: Item Description Materials PET, APET, PETG, CPET Main Motor power 132kw ,185kw Output product width 500-1200mm; 800-2200mm Output product thickness 0.15-2mm Line speed 5-25m/min; 5-18m/min Capacity 450kg/h; 650kg/h. Wooden case linked with bubble bag or as your requested.
