GS Series is a solvent-based screen ink which applicable to most of the transparent plastics, especially for PET, PC, PVC, acrylic and glass. Perfect mirror effect achieved on substrates with the highest degree of transparency for light reflections. With the fine metallic particles in 10úgm, treated distinctively and the synthetic resin resulting in an innovative product, the stylish mirror effect could be simply done by printing. The series typically reaches its boiling point at 76óJ relative to the degree of dissolution. Applications: Mesh 300 íV 350 polyester mesh (120T íV 140T) Stencil Any direct emulsion and capillary film which are solvent resistant. Squeegee Sharp edge, 65ﾟíV 85ﾟblade Dilution GS series is formulated to print from the container with excellent properties, add FM-005 Thinner while necessary to assure the excellent mirror effect. Should be well mixed before printing and fastened during storage. Curing (PC, PET) by solvent evaporation and forced dry at 120 íV 130óJ in 20 íV 30 minutes, 40 minutes at humidity. (PVC, PMMA) by solvent evaporation. Surface dry at room temperature then forced dry at 30 íV 40óJ in 20 íV 30 minutes. (Glass) by solvent evaporation. Leave idle in 2 íV 3 minutes and forced dry at cool temperature in 15 minutes, then 130óJ in another 20 minutes for excellent adhesive performance. Wash-up By specific Screen Wash. Storage Dry indoor below 75% humidity in 90 days from the date of manufacture. Standard Colors: GS-1200 Black GS-1212 Magenta GS-1214 Silver GS-1239 Blue GS-1250 Rich Gold GS-1251 Champagne GS-1255 Pale Gold GS-1259 Copper
Mirror-like effect coatings resin BC5043 Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating. BC5043 Physical and Chemical Data: Test item Standard Appearance Silver liquid Hardness 48h:Grade F Adhesion 48h:
Supplier: Mirror effects inks, laser inks, chameleon inks, ovi, metallic inks, screen inks, varnishes and adhesives, glossy, UV curable, textile inks.
Supplier: Mirror effect ink, solid epoxy resins, solid acrylic resin, water based epoxy resin, water based acrylic resin, water based alkyd resin, water based pu resin, epoxy curing agent
FLYING FO-SA Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .  Product Description  Strong Point of FLYING FO-SA Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 72 hours in ink-box and no crust in 15 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-SA Sublimation Offset Ink  :  1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric .  After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3)Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-SA Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing. Product Description Strong Point of FLYING FO-GR Sublimation Offset Ink   :  1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.  2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.  3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.  4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.  5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance. Use Method of FLYING FO-GR Sublimation Offset Ink  : 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink . 2) Put the printed paper on substrates,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates. 3) Put both the paper and substrates on the heat press. And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image. 4) Finally ,take out paper and fabric from heat press ,the final product will be born . Typical Uses of  FLYING FO-GR Sublimation Offset Ink  : Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
Sublimation Offset Ink printing used product include Offset Machine (such as Heidelberg) , Sublimation Offset Ink , two-side Offset Paper , Heat Transfer Machine and Fabric (such as Polyester fabric ). Sublimation Offset Ink printing Process: 1.The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the two-side offset paper using sublimation offset ink . 2.Put the printed paper on substrates ,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed surface facing downwards on the surface of substrates. 3. Put both the paper and substrates on the heat press. And heat(190-220),time(15-30S) and pressure(0.5kg/cm²) is applied using a heat press. The ink sublimates i.e. converts to gaseous form and gets deposited "into" the surface, thus transferring image. 4. Finally ,take out paper and fabric from heat press ,the final product will be born . FLYING FO-SA Sublimation Ink Color fastness : ColorMagentaYellowCyanBlack Rank 5-6 6 4 4
Sublimation Offset Ink printing Process: 1.The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the two-side offset paper using sublimation offset ink . 2.Put the printed paper on substrates ,such as polyester and nylon fabric . After offset printing, put the printed paper on the surface of the substrates , and with printed surface facing downwards on the surface of substrates. 3. Put both the paper and substrates on the heat press. And heat(190â??-220â??),time(15-30S) and pressure(0.5kg/cm) is applied using a heat press. The ink sublimates i.e. converts to gaseous form and gets deposited "into" the surface, thus transferring image. 4. Finally ,take out paper and fabric from heat press ,the final product will be born .
