Hot die forging hydraulic press Max. press force: 50,000ton Main Performance Parameters Nominal pressure 60MN Return force 3MN Idle stroke fast-down speed 200mm/s Return speed 15mm/s Max. stroke of moving cross head 1000mm Opening height of press 1300mm Forging temperature 500 degree Celsius.
5, 000 ton heavy 4-column push-down hydraulic open die forging press with 80 ton forging manipulator Press specifications Press force: 400.0 bar (4, 700 tons) Upset force: 425.0 bar (5, 000 tons) Maximum press stroke: 2, 500.00 mm Main cylinder diameter: 710.0 mm No. Of cylinders: 3 set Press daylight: 5, 000.0 mm Press force stage @ 425 bar 1st stage (one-central cylinder): 16.7 mn 2nd stage (two-side cylinder): 33.4 mn 3rd stage (three-all cylinder): 50.0 mn Distance between columns clear width: 4, 000mm x 1, 800mm Table shifting device stroke (left x right): 3, 000mm x 3, 000mm Die magazine: 4-die magazine Number of press stroke Force stage penetration return stroke stroke/minute 3-cylinders 150mm 300mm 10/12 3-cylinders 100mm 200mm 15/17 2-cylinders 50mm 100mm 25/30 1-cylinders 5mm 20mm 80/85 Weight of press (die magazine/die shift): approx. 900 tons (1, 984, 140 lbs) Overall dimension of press Total dimension of press: 14, 370 mm Press height above floor level: 10, 870 mm Depth: 3, 500 mm Quantity of pumps: 8 Pressure of each pump 1) rx 360 (2): 400 bar, max 500 bar 2) rf 1000 (6): 400 bar, max 450 bar.
Manipulator specifications: Carrying capacity, nominal: 80 tons Tongs clamping moment: 2, 000 knm Tongs openings, without inserts, round: 800/2, 000 mm round With inserts: 200 - 800 mm round With extension arms: 100 - 2, 800 mm round Max. Turning diameter with extension arms: 3, 900 mm Vertical tilting angle of tong: up 15 angle (down to floor) Horizontal movements of tong in forging Direction, relative to carriage: 400 mm Speed, times: Forging: 0-30 m/min Traveling: 0-50 m/min Turning of tong: 0-8 rpm Lifting and lowering of tong: 90 mm/sec Tilting of tong: 90 mm/sec Side shifting of tong: 80 mm/sec Accuracy: Traveling: 3.0 mm Turning: +/- 1 angle Total delivery of the main pumps: approx 1, 450 l/min Total capacity of accumulator: 600 liters Usable capacity of accumulator: 200 liters Travel distance: 25.0 meters.
D53 series 4000 5000 7000 Ring size OD (mm) 500-4000 500-5000 800-7000 Height (mm) 80-700 80-750 80-800 Machine parameter Radial rolling force (kN) 2000 2500 3000 Axial rolling force (kN) 1600 2000 2500 Linear speed of press (m/s) 1.3 1.3 1.3 Machine dimensions LxW (mm) 18500x4500 20000x5500 27000x7100 Height above ground (mm) 4400 5000 6100 Drive power Radial (kW) 2x315 2x315 2x400 Axial (kW) 2x315 2x315 2x355
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
We has been specialized in manufacturing Open die forging hydraulic presses, Close die forging hydraulic presses, Forging manipulators, Ring rolling mills, High speed forging units and other hydraulic presses for many years.
Can supply: PC BOTTLES (LIGHT BLUE COLOR) BALES. Post industrial and post commercial. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container approx. 22 MT ( 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
We can supply: PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES. Post consumer from sorting line. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container aprox. 26 - 28 MT. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials.
