Description: Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water actiated polyurethane resin. Our pipe repair bandage uses enironmental friendly materials, and mainly used for repair oil , gas & water pipeline etc, and adheres to metal, plaster, pc, copper, rubber, fiberglass, concrete, wood, ceramic, polyester, ect. Outstanding adantages: Catalyst: water Resin makeup: polyurethane Heat resistance: 180 Pressure: 450 psi Bonds: copper pipe, pc, polypipe, metal, fibreglass Set time: 20 30 minutes, sets under water Chemical resistance: most diluted chemicals and fuels Application: 1. Once the leaking area is identified, shut down releant pipes or hoses immediately. 2. Prepare the surface by cleaning and roughening the pipe. 3. Put on enclosed latex gloes. 4. Apply steel putty to the leak site and mould. 5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds. The entire contents must be used once the package is opened. 6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coerage. It is important that the bandage is applied. 7. Quickly as curing begins once it is taken out of the water. 8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together. Continue this action during and upon completion. Package: oem serice is aailable Shipping: within 15 working days after payment About us: Ansen medical is the manufacturer with 13 years experience specializing in fiberglass pipe repair bandage , emergency pipe repair bandage