Hf edge glued panel press 1. Introduction: High frequency edge glued panel press is advanced technology for panel making. Hf generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, glue molecules are polarized - rotated - heated by friction.  high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. so high frequency edge glued panel joining press only heat glue line but not the whole panel, saving much power and time, improving the efficiency a lot. Tons of vertical pressure assure flatness of panel, even can correct the curved panel slightly. Machine can help customer save a lot of wood material for next sanding procession.  2. Features: This model is the best choice for short furniture panel joining. Width and length can be free jointed. There are following advantages: 1). Can place wood pieces in right position, avoiding dislocation problem and damage cylinder. 2). Machine working table processed by non-cohensive material. Glue is easy to remove and assure panel quality. 3). Top working table designed with lifting device. Make sure panel stright and flatness.Save more wood material for next sanding process. 4). Locate high frequency generator and hydraulic system on the top of machine, saving facotry space. 6). high efficiency: hf heating 1-2minutes finish one standard panel(8x4 feet, 20mm thick ). 7).Low power costs: hf power only heat glue line, save the power. (0.6-1 kwh per panel) 8).Labor saving: automatic control. One button can finish whole cycle. 9).No pollution: hf power only needs electricity, dust free and clean