INTRODUCTION: It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing agent/catalyst ,which gets cured at room temperature 25 Centigrade within 3-6 hours or heating curing.This product is perfect for cement,concrete stone, GRC and GFRC products' mold making,such as the flower pot,fountain,Polyurethane Wood Imitation,Reinforced Plastic,Garden Decorations,fiberglass product and other decoration industries. FEATURES: 1.High duplication times and no deformation 2.Excellent tear strength and tensile strength. 3.Good fluidity and good operability and good for both pouring method and pouring method. 4.Excellent flexibility and it is easy to demould. 5.It gets cured at room temperature 25 Centigrade within 3-6 hours. 6.Suitable hardness from 30 to 40 Shore A OPERATION OF SILICONE RUBBER FOR CEMENT CASTING: Step 1:Prepare the original mold Weigh silicone&curing agent according to the mix ratio recommended,than remember to stir silicone & curing agent evenly,otherwise the silicon rubber will be partly solidified and bring problems in your final operation. Whats more, the finished molds will meet a short life. Step 2:Vacuum pumping Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. Step 3:Pouring casting or Brush operation Step 4:After 3-5 hours later,demoulding the silicone mold,It will be better to use the mould after 24 hours. APPLICATION: This silicone is suitable for statues' mold making. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly, with high safety and no toxic.You can absolutely trust your choice with us.