1. Feature: JNX-6000-I is with a Wax and detergent system, there are 2 bottles on top of the machine, one for liquid detergent, the other for liquid wax. With this system, the machine is able to spray only steam, or steam with liquid wax, or steam with liquid detergent. 2. Usable range: Car wash shop Car engine, car interior and exterior, vehicle beauty salons, car washing stations, car washing stations and parking lots of supermarkets. 3. Specification : Model #: JNX6000-1 Steam Pressure: 8BAR/0.8MPA(steady) Steam temperature: 60 degrees- 110 degrees Preheating time 1 minute/60 seconds Power: 6-7.5KW Voltage: 220V-240V 50/60Hz Weight(kg): 45 Dimension: 83*48*72cm Feature: without boiler, single gun, with the wax and detergent system Water consumption (L/H) 18 Water tank: 35L 4. Advantage (1) Non boiler technology is safer with no explosions, cracks or leaks from a boiler steamer. (2) Almost instant steam, 1-2 minute heating time. While boiler steamer need about 7 minutes. (3) Energy savings. More steam per watt is produced than in a boiler steamer and no wasted energy heating water and steam that may not be used. (4) Stronger, steadier steam pressure than a boiler steamer. The boiler steamer are likely to explode if increase the steam pressure. (5) Totally adjustable steam from very wet to very dry for all types of cleaning (6) Lighter in weight than a boiler steamer. Less electrical components, meaning there is far less to break inside (7) Always "continuous" fill water. This is not an expensive "option" as in most boiler steamers, which also would mean more parts and more breakage. With our steamers you add water when you want and steam is made almost immediately (8) As known to all, this kind of machines save a great amount of water as only 4 litres of water / 15 minutes can completely wash a car! (9) A good way to wash car in cold winter when all the water freezes. 5. Protection system Current leakage-- A leakage protective device is provided. Water shortage-- The power will be cut off automatically if the tank level is lower than the set level. Overpressure-- The power will be cut off automatically if the system pressure exceeds the set pressure. Overheat-- The power will be cut off automatically if the system temperature exceeds the set value. Three ply board box/ case.