On the basis of inheriting the advantages of strong rigidity, symmetrical structure and strong stability of the traditional vertical CNC milling machine, this machine tool introduces the international advanced dynamic rigid design concept and optimizes the design of moving parts. The machine tool has the characteristics of large torque, fast response characteristics, etc., which is suitable for the needs of various machining fields such as automobiles, molds, aerospace, hardware and so on. �·Linear slide rails are used for three-axis movement. The three-axis rapid movement can reach 36m/min, and the heaviest load is 650Kg, ensuring accurate positioning. �·The main shaft and the motor belt use 1:1 connection design. The main motor is a low inertia motor, and its maximum speed is 10,000rpm. �·The main shaft and the motor are directly connected. There is no belt or gear transmission noise, backlash, or vibration. The motor shaft outputs the speed directly, the maximum speed is 12000rpm, and high-quality tapping effects can be obtained. The main motor is a low-inertia motor, there is no time lag during high-speed tapping and commutation to avoid pulling teeth. �·The machine bed, workbench, column, beam, saddle, and headstock are made of resin sand molded HT300 high-strength inoculated cast iron. After secondary annealing, the internal stress caused by casting stress and rough machining is completely eliminated to ensure high rigidity and high structure. Stable and qualitative, ensure quality permanently.