The A Grade of Tire Compounds are supplied from the tire factories which are mainly in USA, Europe and the Far East. The compound`s content is Natural Rubber and Syntehtic Rubber ((S)SBR, BR). The materials have original tire compound`s chemical additives because of that vulcanization time is long so its shelf life is long. Users who use these goods must add some accelerators while mixing them. The goods have high elasticity, high abrasion resistance, low degree of deformation because of that the goods are preferred by users A GRADE COMPOUND Goods A Grade Tire Compound Type Wigwag Vulcanization %0 Tensile Strength Min. 14 MPa Hardness 60 Shore A (+/- 5) Abrasion 100 - 130 Elongation 400 - 650 Density 1.15 g/cm3 (+/- 0.05) Quantity 20' 16 MT, 40' 24 MT Features Wet Hold Resistance Wear Resistance Excellent Flexibility Low Heat Resistance Impact Durability Easy Processing Good Adhesion Weather Resistance B GRADE COMPOUND Goods B Grade Tire Compound Type Wigwag and Tread Vulcanization Up to % 10 Tensile Strength Min. 15 MPa Hardness 60 Shore A (+/- 5) Abrasion 100 - 130 Elongation 400 - 650 Density 1.15 g/cm3 (+/- 0.05) Quantity 20' 15 MT, 40' 23 MT Features Wear Resistance Excellent Flexibility Impact Durability Heat Aging Properties Easy Processing Good Adhesion C GRADE COMPOUND Goods A Grade Tire Compound Type Wigwag and Tread Vulcanization Up to % 15 Tensile Strength Min. 14 MPa Hardness 60 Shore A (+/- 5) Abrasion 100 - 130 Elongation 400 - 650 Density 1.15 g/cm3 (+/- 0.05) Quantity 20' 15 MT, 40' 23 MT Features Wear Resistance Excellent Flexibility Impact Durability Good Adhesion