Properties: Keep a good Lubrication effect in high temperature and high pressure processing, this polymers thing is very easily absorbed by the Surface of fiber as a slimy film formation, effectively reduce the friction between the Fabric and fabric, between the fabric and metal equipment Surface, more beneficial for the rope fabric to start moving, especially suitable for difficult conditions of processing, such as low bath ratio or heavy load winch, jet dyeing machine, and the treating of heavy and easy crease fabric. Rasa Micro Lube is suitable for various wet processing, to prevent crease such as washing, extrusion, and boiling, fulling and lay flat process. No damage Stability, so no dye aggregation, colour Patches and colour dot. Improve the efficiency of injection dyeing machine, winch, padder, drum-type dyeing machine. Quality Indicator:- Appearance: White Powder Content: >99% Ionicity: Cationic pH: 7(Solution of 10%) Compatibility: Can be used together with the anion Material Stability: Highly Stable in the hard Water and in Usual density of lye and the electrolyte. Main Uses: Rasa Micro Lube can be poured into warm water for diluting, and then use in the bath. For best effect, it is better to add it into the bath before adding the fabric. It can be added in the Pretreatment and dye Process respectively. 7-10kg may be diluted to 1 ton, Recommended Dosage after dilution as 1-3 g/L. Packing and Storage: 25kg bag packing. According to the general chemical storage, Stocking in Drying Ventilated Place, Storage Period: one year