Auto Fakra Antanna Adapter Cable FAKRA Connectors and Cable Assemblies support applications that require a high-performing, reliable, and cost-effective RF connector. FAKRA connectors are standard SMB Connectors embedded within a special inter-locking plastic housing that uses multiple color-codes for easy identification and mating, and are designed to perform up to 4GHz at 50 �©. MAJOR CHARACTERISTICS characteristic impedance: 50�© Temperature range: -45â??ï½?+85â?? (The lower end of the wiring cable shall prevail) Design structure and technical parameters: RF coaxial connector: FAKRA SMB connector Material: Inner conductor: Brass,Gold-plated Insulating medium: PTFE Outer conductor: Brass, Nickel-plated Electrical and mechanical properties: characteristic impedance: 50�© Frequency range: 0-4GHz Medium Pressure: 1000V (60s) Contact Resistance: Inner conductorâ?¤6m�© Outer Contactâ?¤1m�© Insulation Resistance: 1000M�© V.S.W.Râ?¤1.3 (DC-4GHz) Insertion loss:â?¤-15dB(0-4GHz) Connectors mechanical life: â?¥500 cycles (frequency 12 cycles/MIN) RF coaxial cable: RG174 Material: Inner conductor: Bare copper (7/�?0.16�±0.003mm) Dielectric: PE(�?1.52�±0.05 mm) Outer conductor: Bare copper braided wire(80*0.10 mm) Jacket: PVC(2.±0.10 mm) Physical electrical performance Min Bent radius: 30mm Max voltage: 1500 VMS Temperature scope: -20+80 Component overall specification requirements Appearance: Connector Connector surface coating is uniform, no copper exposure, scratch (slight scratch is allowed but the metal under the coating shall not be exposed), oxidation, fracture, insulation deformation and other phenomena. Cable The cable is flat, smooth and without damage. No serious scratch is allowed. Cable assemblies The surface of the cable assembly shall be clean, free from dirt and bruises; Welding should be flat, no cracking, copper exposure and other phenomena; Reliable welding.