Find Verified Universal Material Testing Machine Suppliers, Manufacturers and Wholesalers

Equipment summary: RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ±1% / the value ±0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.

2.3 Technical parameters: Maximum test force: 50kg, 100kg, 200kg (choose any one) Force unit: Kgf bf N Test itinerary :1000mm without fixture Print Project: Print after saving data Test speed :0-500mm/min can be set Shutdown method: Automatic shutdown due to fracture control mode : PC control Power source :Stepper motor Transmission mode :Ball screw drive Host size: Approximately 500 * 500 * 1430mm; Display method :Computer full Chinese display (or English system) Testing items: Real time value, maximum value, fracture value, elongation, tear strength, proportion of fracture points, etc 2.1. Purpose: Test the tension, pressure, shearing, peeling, tearing and other tests of wires, leather, fabric, plastic and other products, and meet various tensile and pressure testing standards. 2.2 Characteristics: This machine is driven by a precision motor, ensuring smooth operation and low noise. The key components of this machine are all high-quality and reliable products, making your experiments precise and effective. This machine is fully computer-controlled and can save and print test data.

Main function : HZ-1001A Tensile testing machine mainly applied to test the froce of metallic and non-metallic materials, the force such as tension, compression, bending, shear,peel, tear or two-points extensions (need to add extensometer) and others., the material such as rubber, plastic, wire and cable, optical fiber and cable, safe belt, leather belt composite materials, plastic profiles, waterproof membrane, steel, copper, profiles, spring steel, bearing steel, stainless steel, castings, plate, strip, non-ferrous metal wire. Adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results;automatically recorded the biggest point,breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data,After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level. Corresponding standard : GB/T16491-1996 electronic universal testing machine . Applicable industry : It is widely used in controlling the quality; Rubber & Plastics; metallurgical iron and steel; manufacturing machinery; electronic equipment; automobile production; textile fiber; wire and cable; packaging materials and foodstuffs; instrumentation; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research Laboratory; inspection arbitration, technical supervision departments;building materials, ceramic; Petroleum & Chemical; other industries. Technical parameter : model: HZ-1001A universal material shear testing machine Maximum load: 2ton, 5ton, 10ton( optional) Accurate grade:1 grade /0.5 grade Effective measuring range:From 0.2% to 100% (1 grade) / From 0.4% to 100% (0.5 grade) Tester resolution: Max load 1/200000, constant the resolution Load sensor: Basic configuration sensor max load: one Effective testing width: 400mm (can be widened according to customers requirement ) Effective tensile space: 400, 500, 600mm (can be increased the height according to customers requirement) Testing speed: from 0.001 to 500mm/min Tolerance: 0.5% / tolerance: 0.2% Min span :10mm, Max range of deformation 800mm Another configuration:Min span: 25mm, 50mm, 100mm. Max range of deformation 5mm, 10mm, 25mm. By standard export wooden case.

Wet PVC from petrochemical fiiltration process, moisture max 25%, origin Germany, monthly quantity 100 mt, pictures available, price USD330/mt CNF.

1. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 2. Features of testing machine 1) adopting aluminum alloy cover, with attractive streamline structure 2) mainly used to test mechanical properties for metal, non-metal and composite materials 3) adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) after test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) with remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) with functions of automatic return to original position, intelligently, efficiently, quickly 7) with limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) with many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.

Plastic granules particles new and recycled regrind materials We offer new and recycled plastic granules of PVC, PC, ABS, HDPE, LDPE, LLDPE, PET bottle-grade chips and materials. Regenerated particle with different prices, mesh number, level grades and colors. As the price will fluctuate in different periods, you need to make an inquiry to buy.

Grains like corn, corn gluten meal, ddgs, soybeans, soybean meal, soy hull pellets, canola meal and pellets, cotton seeds and meal, and wheat, conventional or organic (non gmo), dairy products, frozen meats and seafood, plastic scraps, fish meal, fish oil, whey powder, flax seeds, beet pulp pellets, meat and bone meal, poultry meal, feed, 3d printers, beans, peas, nuts.Commodities brokerage firm

1. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 2. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 3.Spec. of testing machine No.Item Spec. 1Max. Load 20KN 2Resolution of test force±300000 3Resolution of displacement0.001mm 4Precision of crossbeam displacement±0.5% 5Precision of deformation±0.5% 6Measuring range of test force1%-100%FS 7Relative error of test force±1% 8Relative error at zero point±0.5% 9Speed of crossbeam0.01-500mm/min 10Precision of crossbeam speed±1% 11Speed range of load0.005%-5%FS/s 12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 13 Speed of deformation0.005%-5%FS/s 14 Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 15 Stroke of crossbeam 900mm 16 Effective tensile height 650mm 17 Effective test span 400mm 18 Effective compression height 800mm 19 Diameter of compression platen 100mm 20 Voltage and power 220V10%, 50Hz, 700W 21 Dimension of main machine650X450X1650mm 22 Weight of main machineabout 300kg

1. Applications of testing machine ï?·This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.  2.Specs. of testing machine No.ItemSpec. 1Max. Load10KN 2Resolution of test force1/±300000 3Resolution of displacement0.001mm 4Precision of crossbeam displacement±0.5% 5Precision of deformation±0.5% 6Measuring range of test force1%-100%FS 7Relative error of test force±1% 8Relative error at zero point±0.5% 9Speed of crossbeam0.01-500mm/min 10Precision of crossbeam speed±1% 11Speed range of load0.005%-5%FS/s 12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 13Speed of deformation0.005%-5%FS/s 14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 15Stroke of crossbeam900mm 16Effective tensile height650mm 17Effective test span390mm 18Effective compression height800mm 19Diameter of compression platen100mm 20Voltage and power220V±10%, 50Hz, 700W 21Dimension of main machine550X400X1650mm 22Weight of main machineabout 260kg

Polyethylene(PVC) geomembrane, as a high-performance waterproof and impermeable material, has many remarkable advantages. Thickness: 0.1mm-3mm Width: 2m-6m Color: Black/White/Other colors Following is our PVC geomembrane Thickness 1.6mm specifications: Tensile Strength (vertical and horizontal): 20MPa/mm Elongation at Break (vertical and horizontal): 580% Right-angle tearing strength (vertical and horizontal): 180N/mm Water vapor permeability coefficient: Using temperature range: +70~ -70 Puncture strength 360N Water impervious: 100% Root resistance: 100% Difference Between PVC Geomembrane and HDPE Geomembrane PVC geomembrane and HDPE geomembrane have significant differences in physical properties, treatment difficulty, joint treatment, puncture resistance, and resilience to deformation. Physical Properties and Suitable Environment: PVC membrane: relatively soft and easy to bend, suitable for general waterproofing projects, swimming pools, and wastewater treatment, etc. HDPE membrane: has higher strength and wear resistance, suitable for engineering projects with higher strength and durability requirements, such as water conservancy projects and landfills. Handling Difficulty: PVC membrane: Due to its flexibility, we can make seams in controlled factory conditions, typically requiring fewer on-site seams than HDPE geomembrane. HDPE membrane: Handling in cold weather conditions can be challenging and requires sewing outdoors. Puncture Resistance: PVC membrane: It is harder to penetrate than HDPE and has high elongation characteristics, allowing it to adapt to site changes without reinforcement. HDPE membrane: While it has elasticity, it becomes plastic after exceeding its yield point and no longer has elasticity. Deformation Recovery: PVC membrane: Most of the deformation can be recovered, with a high tensile elongation, suitable for engineering projects with larger design strain limits. HDPE membrane: Deformation after exceeding the yield point cannot be recovered, and the material properties will change. We should select the appropriate geomembrane according to the specific project requirements and the use environment. HDPE geomembrane is suitable for projects that require high strength and durability, while PVC geomembrane is suitable for general waterproofing projects and water treatment.

Plastic scrap (ldpe, pp, pvc, pet, pmma, hdpe, bopp, pe, ps, abs etc)., textile waste (cotton hosiery clips, cotton thread waste), denim, unbleached, selvedges rama string, rags for mattresses, wiping rags, licekrin dropings 100% cotton bales, card fly etc.) paper scrap.

Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.