Features - No drift, dynamic tilt measuring - Lowest cost, high performance - Built in MEMS triaxial accelerometer and triaxial gyroscope - Dynamic accuracy ±0.5°�optional ±1° or ±0.1° - Highest refresh rate 400Hz - Autonomous working, do not need any external auxiliary - Mounted wherever needed Description SST810 dynamic inclinometer is specially designed for motion application, which is an inertial product with highest 400Hz update rate. The traditional inclinometer on the market is designed on accelerometer and electrolyte principles. In dynamic motion such as rapid movement vehicle and vessel, the measurement result will be affected by extra axial acceleration and centripetal acceleration, so that valid angle measurement data can't identify effectively, and accuracy is unable to guarantee. SST810 adopts advanced inertial navigation technology to exactly measure dynamic pitch/roll tilt angle for long time, without aiding of GPS.
Application Sensor applications for full safety monitoring of tower crane are embodied in the following areas 1)Tower crane installation. Crane foundation is the basic assembly unit, the practice has proved that major security incidents are due to the problems of crane foundation. Vigor sensors can measure the installation angle, during installation, vigor sensor can real-time detection, send the warning information in time. 2)The height of the tower crane automatically rise. During the automatically rise, after adding new steel frames, the operation room is still perpendicular to the ground or not will have a great impact on the safety. 3)Tower crane vertical lifting process. Measuring the bending angle and tilt angle of the swing arm, the tilt angle of crane. 4)Tower crane horizontal delivering process. Measuring the bending angle and tilt angle of swing arm, the tilt angle of crane. 5)In the heavy windy and rainy weather conditions, measure the swing angle of crane. Tower crane installation. The height of the tower cran e automatically rise. Tower crane vertical lifting process. Tower crane horizontal delivering process. In the heavy windy and rainy weather conditions, measure the swing angle of crane. Application of sensors: Tilt Beam sensor - High resolution, accuracy & stability - High safety remote signal transmission distance>500m - U-Shaped openings in both ending, easy to connect sensors - IP65protection - Alloyed & anodized aluminum housing, corrosion-resistant, wear-resistant, artistic SST20 low cost tilt sensor - Low cost, high performance, suitable for batch application - 50Hz refresh rate, 10Hz response frequency - 0.07accuracy@-15~50? -0.2% cross-axis error - Available to horizontal, vertical, headstand, etc installation methods - IP67protection - 9~36VDC power supply - Sensing elements survive to 1500g shock while operating SST810 dynamic tilt sensor - No drift, dynamic tilt measuring - Lowest cost, high performance - Built in MEMS tri-axis accelerometer and tri-axis gyroscope - Dynamic repeatability 0.5 - Highest refresh rate 1000Hz - X/Y/Z angular rate & acceleration data available - Autonomous working, do not need any external auxiliary - Mounted wherever needed
Supply Ability: 20 units per Month Weight(KG): 420000 kg Condition: New Rated Lifting Moment: 2009kN.m Place of Origin: China Warranty: 1 Year Engine Brand: Imported Hydraulic Pump Brand: Imported Hydraulic Cylinder Brand: Imported Max. Lifting Height: 58.1m Feature: TRUCK CRANE Certification: CE/ISO9001 Warranty of core components: 1 year Brand Name: XCM GIZOOMLION Video outgoing-inspection: Provided Marketing Type: New Product Core Components: Engine Hydraulic valve brand: Imported Application: construction Rated Loading capacity: 50ton Machinery Test Report: Provided Packaging Detail: Export standard packaging
Engine Crane
Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers.
We are specialized in the development and manufacture of construction machinery. The products feather advanced technologies and CAD &PRO/E is perfectly used. Our company now has good system and assembly of material pretreatment, large numerically controlled cutting equipment wielding application.
Supply Ability: 100 units per Month Weight(KG): 2400 kg Warranty of core 1 Year components: Machinery Provided Test Report: Condition: New Warranty: 1 Year Place of Origin: China Fuel tank capacity::45L Optional: side shift solid tyres eto Color: RED Yellow/Customized Loading Capacity: 3ton Min. Lifting Height: 100mm Overall Dimensions:3800*1230*2110mm Tire: Pneumatic Fork Width: 125mm Brand Name: HELI Load Center: 500mm Mast: standard two-stage M300 Video outgoing-inspection: Provided Type: Powered Pallet Truck Core Components:Pressure Mast: standard two-stage M300 Video outgoing-inspection: Provided Type: Powered Pallet Truck Core Components: Pressure vessel,MotorOther,Bearing,Gea Marketing Type: Ordinary Product Applicable Hotels,Garment Shops,Building Industries: Material Shops,Machinery Fork Length: 1070mm Power Souce: Diesel Engine Application: warehouse and logistics Packaging Detail: Nude package, attached parts and tools into standard export
Hello, We are offering our highly sought-after tower cranes at a special discount, which are favored by many companies in the construction industry. As HYZH ENERGY, we have been providing the highest quality and reliable equipment to our customers in China for 25 years. In line with this, we would like to offer you a special tower crane deal that meets your business needs. Please review our product catalog for detailed information and kindly provide us with the model and quantity you are interested in. Under this special offer, we are introducing our products to the market at a competitive price. For detailed pricing and further information about our tower cranes, please contact us Please note that at HYZH ENERGY, customer satisfaction is of utmost importance to us, and we are committed to providing you with the highest quality products
1 x Used JCB 926 All Terrain Fork Lift Truck Year of Manufacture 1997 Specification 2600kg Maximum Lift Capacity 4wd Container Spec Mast 45m Lift Perkins Engine Working Hours 6254 Price 10500 GBP ex works United Kingdom Machine Location West Yorkshire United Kingdom Origin United Kingdom HS Code 8427 2011 Minimum Order 1 Unit Available Shipping Terms Ex Works United Kingdom Price is Ex Works United Kingdom We are happy to provide transportation Shipping Prices should you require this Payment Term 100 TT Before Shipping
Tower Cranes
Our Advantages Why Choose Our CPC Forklifts 1. The appearance is simple, generous and beautiful, and strict environmental protection design; 2. The wide-view gantry design makes the driver's vision wider; 3. Reliable LCD digital special instrument, friendly man-machine interface, it is convenient for the driver to accurately control the vehicle status; 4. The new steering wheel adjustment mechanism improves the operating comfort and adjustment reliability; 5. The design of the high-top large-diameter air intake system can keep the engine away from dust, effectively exert the engine performance, and improve the service life; 6. Optional casting steering axle, low maintenance cost later.
Car Lift
Bromma Twist Lock Assembly Bromma Twist Lock with Nut & Guide, Arm & Spherical Washer
Caterpillar order picker, model NOH10NH, with a power of 3.5 kW and a load capacity of up to 1000 kg. Manufactured in 2010 in Finland, this equipment is robust and suitable for industrial operations requiring power and reliability. Brand CATERPILLAR Model NOH10NH Serial number 99AH00025 Voltage 48 V Power 3.5 kW Machine weight without battery 1199 kg Total weight 3370 kg Capacity (load) 1000 kg Fork dimensions (D x W) 400 x 600 mm Load capacity 7000 kg Brand gestionbat SUNLIGHT Battery type 24 5 PzS 775 Nominal voltage (V) 48 Capacity (Ah) C5 775 Weight (Kg) 1140 Serial number Gb 140010
This Fiat industrial stacker is a robust piece of equipment, ideal for handling heavy loads. With a considerable weight and a powerful battery, it is perfect for intensive work in warehouses and factories. Built to last, it combines stability and efficiency Description Details Unladen Mass (Without Traction Battery) 2795 kg Traction Battery - Minimum Weight 950 kg Traction Battery - Maximum Weight 850 kg Capacities with Vertical Mast - Weight 1 1350 kg Capacities with Vertical Mast - Weight 2 1100 kg Capacities with Vertical Mast - Weight 3 1000 kg Capacities with Vertical Mast - Weight 4 950 kg Distance (D) in mm - 1 400 mm Distance (D) in mm - 2 600 mm Lifting Company J. Forklif Elevacin, S.L.
The Jungheinrich EFG electric forklift is an efficient and quiet equipment, ideal for warehouse and factory operations. Powered by high-performance electric motors, it offers a load capacity of 3.5tons. Its compact design facilitates maneuvering in tight spaces, and the ergonomic cab ensures operator comfort. With advanced technology for precise handling and assistance systems, it is a durable and low-maintenance option, perfect for companies looking for a sustainable and economical material handling solution.
This industrial loading ramp is designed for demanding logistics operations, supporting up to 16,200 kg. With a wide 12,800 x 2,100 mm platform and a fast lifting speed of 50 seconds, it facilitates safe and efficient loading and unloading of heavy goods. Made of robust materials, it is durable and easy to operate, with integrated safety systems for stability during use. In addition, we offer technical support and after-sales service. Available for immediate shipment. If you need 3 units, please contact us for more information or to coordinate your purchase. Product Name: Dock Ramp Model No: Cdr6-8/0.8-1.0 Manufacture Date: 2023.04.01 Max. Capacity: 16200 Kg Climbing Slope: 12.7 Platform Size: 12800 X 2100 mm Max. Lifting Speed: 50s Net Weight: 3000 Kg Batch No: 20230401
This type of forklift is known for its ability to operate in very narrow aisles, which maximizes the storage space available in warehouses. Features of the Aisle Master LPG: Versatility: Designed to move in narrow aisle widths, allowing for more efficient use of storage space. Load Capacity: Typically has a load capacity of up to 2,500 kg, although this may vary depending on configuration. Lift Height: Aisle Master models can lift loads to considerable heights, maximizing vertical storage capacity. This model is ideal for warehouses and distribution centers looking to optimize space and improve operational efficiency. In addition, the use of LPG makes it a versatile option, allowing its use in different environmental conditions and with a lower environmental impact compared to diesel models.
Ergonomically design Wideview Mast and Container Mast for Choice Fully Integrated Frame and Suspension Chassis Excellent Cooling System and Heat Releasing System Easy to maintain and repair Lower Gravity Emergency Stop Switch Multiple Option Available for Choice Counterbalanced Diesel Forklift provide you with multiple choice as per your real needwe have different reliable engines for choiceAll these engine have been tested that they can be trusted through all kinds of tough working condition and get recognition from millions of client across the worldwide These engines are specifically designed for the forklift usewith low fuel consumptionless noise and vibrationall these features improve the whole performance of the forklift High efficiency is also delivered through the performance of the axlesthe excellent brake system make sure the forklift operate with safetythe steering axle provide prompt and precise feedback to the driver when steering The operator cabin is reasonabledesigned considering its spacelayout of the steering column and instrument displayerfile storagesuspension seatThe wideview mast provide the operator with a wide visibilityimprove the efficiency and guarantee the safety Because of the reasonable layout of enginetransmissionaxlecounterbalance and chassisthe whole truck is with low gravitythis feature guarantee the stability and driving safety of the forklift
Foin's tower crane models: 1. Topkit tower crane: TK6010-6t 60m TK5513-6/8t 55m TK5510-6t 55m TK5013-6t 50m TK5010-4/5t 50m TK4513-4t 45m TK4810-4t 48m TK900-32/50t 70m TK6024-12t 60m 2.Topless tower crane: TL6515-8/10t 65m TL6015-6/8t 60m TL5610-6t 56m TL5015-6t 50m TL4020-6t 40m TL3030-6t 30m 3.Luffing crane: LF6025-16/18t 60m LF5523-10/12t 55m LF5023-8/10t 50m LF4015-6t 40m LF3020-5t 30m 4.Derrick crane: DC4038-16t 40m DC3023-10t 30m DC1830-4t 18m For other available models, please visit https://www.foincrane.com >>>Our Services pre-sale service 1. We can customize products according to customer needs. Various types of tower cranes are available for your choice. 2. We provide high quality, ex-factory price, fast delivery and reliable service 3. All tower cranes are designed by Spanish designers and have an efficient sales team 4. Whether you are a company or an individual, whether you want to become an agent or buy our products, we look forward to working with you! After choosing 1. Turnkey service, including (transportation, customs clearance, installation, testing) 2. Test each machine before delivery to ensure its quality, and arrange delivery after payment. After-sales service 1. We have a local installation team to help you install the tower crane 2. If necessary, we can also assist in the installation, debugging and maintenance of the machine at your site 3. If you have any questions, please contact us: Emai:
