Within LC8812 IC inside,packaged with the R,G,B color chips inside the 4020 side rgb smd led,it is individual addressable rgb side firing led chip, and the default output constant Current Value, OUTR/ OUTG/OUTB is 12MA. It can achieve individual single pixel control,point by point scanning,reach magic RGB chasing, horse racing, gradual change and other color effects. The LC8812B-4020 side led is same function with SK6812 Side led, same control way.
(1) LC8812B-3210 LED is a side emitting pixel RGB LED, it is 3 wires LED (5v, DAT, GND),which can be compatible with WS2812/SK6812,same function and same control way. each channel is 12mA, and LC8812B-3210 is 36mA per led, side Control circuit and the RGB chip in SMD 3210 components.to form a complete control of pixel,color mixing uniformity and consistency.
(2) Red drive special treatment, color balance.
(3) Line data transmission.
(4) Plastic forward strengthening technology, the transmission distance between two points over 10M.
(5) Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec.
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
PRODUCT INFO
Finger grass is a branching herb comprised of straight, hollow stems and elongated lanceolate to elliptical leaves that grow in an opposite formation around the cylindrical stems. The leaves are slender, tapering to a point, and average 2 to 6 centimeters in length and .5 to 1 centimeter in width. The grey-green leaves are also smooth to the touch, thin, and pliable with finely serrated edges. The stems are thick in appearance but have a hollow center, creating a smooth, crisp, and watery texture. The pale green stems also have a light, succulent, and spongy consistency, lightly coated in fine hairs. Finger grass emits a refreshing, citrus, and herbal aroma and the stems and leaves have a vegetal, citrusy, and earthy, spice-filled flavor. Some consumers recognize the leaves as having a bright and acidic quality, filled with undertones of sweet cumin and curry flavor mixed with notes of lemon and dill. In addition to the leaves and stems, Finger grass seasonally produces tubular flowers that showcase pale pink, purple, to light blue hues.
USES
Finger grass has a bright, complex flavoring mainly used as a fresh finishing element on savory main dishes. The leaves should be washed and gently torn, chopped, or crushed to release their flavor, and they can be sprinkled into salads, minced into dips and marinades, or used as an edible garnish for roasted meats, light sauces, or grain dishes. In Southeast Asia, finger grass is frequently used in Vietnamese cuisine and Cambodian and Thai cuisine on a smaller scale. The leaves are traditionally served fresh in the center of the dinner table, along with other herbs and raw vegetables. These accompaniments are added to curries, stews, and soups such as pho, and each guest can determine how much of each herb is incorporated into their dish for custom flavor combinations. Finger grass can also be sauteed or steamed as a simple side dish or the stems can be roughly chopped and added to stir-fries. While more untraditional, some mixologists in Southeast Asia have begun muddling finger grass into a refreshing cocktail to modernize the herb. In Cambodia, finger grass is placed on the roof of houses and dehydrated for extended use as a dried herb. Finger grass pairs well with meats including poultry, beef, pork, and fish, other herbs such as lemongrass, basil, and mint, steamed rice, lemon, lime, bell peppers, peas, broccoli, water spinach, carrots, and peanuts. Whole, unwashed Finger grass is highly perishable and will only keep for a few days in the refrigerator when loosely wrapped in plastic or a damp paper towel. The herb should be used immediately for the best quality and flavor.
Season
Finger grass are available year-round in Southeast Asia.
We have all types of LED. LED stands for light emitted diode. These LED are available in different shapes and sizes and with different colors. LEDs are used as indicator lamps in many devices and are increasingly used for other lightening. Basically, LEDs are just tiny light bulbs that fit easily into an electrical circuit. The LEDs looks very attractive and provides better performance. We supply led light for the customers in a very reasonable prices
and are used widely for its unique features.
6 Photo Diode
We offer a wide variety of electrical diodes that are electronic components used for conducting electric current in a single direction, thus functioning as a one-way valve. These are known for technical accuracy and are extensively used in electronic industries. Our range includes avalanche diode, laser diode , light emitting diodes, photo diode, pin diode, point contact diode, PN junction.
* Avalanche diode:
* Laser diode
* Light emitting diodes:
Led tube lights l Led bulb lights I Led triproof lights I Led solar street lights I Led flood lights I
Led panel lights I Led emergency lights I Led strip light
LC8812B-5050 LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
LC8812B is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel.
LC8812B-3535/SK6812mini LED are pin to pin function,same lighting effect,same control way. LC8812B-3535 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit.Its appearance is the same as a 3535 LED . Each LED is a pixel.The data protocol adopts a unipolar return-to-zero code communication method. After the LED is powered on, the DIN terminal receives external signal data, and the data regeneration circuit automatically reshapes and forwards the cascaded output data to ensure that the data is transmitted in series without attenuation and normal transmission.
Size: 3mm/5mm/7mm
Type: round head/straw hat head/concave head
Color: various
Border: yes
Cctopure white/warm white
Coloovarious
Brightnesonormal
Legs: long or short
Advantage:
High brightness
Long lifespan
Low power consumption
High performance-costratio
Luminous output degradation of the 10000 hours is less than 25%
3mm/5mm/7mm
1000pcs/bag
Packing way: antistatic bag
0.15kg/bag
Our product range includes:
Light Pink Salt: Ideal for culinary use.
Dark Pink Salt: Mineral-rich, perfect for gourmet and therapeutic use.
White Himalayan Salt: Versatile for cooking and wellness.
Black Himalayan Salt (Kala Namak): Unique for specialized cooking.
Salt Crystals & Blocks: Great for grilling, serving, or decor.
Powdered Pink Salt: Perfect for fine seasoning.
Himalayan Bath Salt: For spa treatments and personal care.
Himalayan Salt Lamps: Natural decor that enhances wellness.
LC8812B-3535/SK6812mini LED are pin to pin function,same lighting effect,same control way. LC8812B-3535 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit.Its appearance is the same as a 3535 LED . Each LED is a pixel.The data protocol adopts a unipolar return-to-zero code communication method. After the LED is powered on, the DIN terminal receives external signal data, and the data regeneration circuit automatically reshapes and forwards the cascaded output data to ensure that the data is transmitted in series without attenuation and normal transmission.
LC8812B-RGBW/SK6812RGBW LED is 4 channels rgbw 4-in-1 digital led chip with 4CH LC8812B-RGBW IC ,It has 4 color chips inside the each led,Red,Green,Blue and "W" color chips. The "W" color cct can be CRI>90 warm white, nature white and cool white, even can be the Yellow or Amber color chips for different options,The RGBW pixel led can be the spi controller control and make your own program for it,also can be dmx controller control with the dmx decoder, or controlled with the artnet controller and work with the software as the madrix, MadMapper,single chip micro computer, Arduino or Raspberry Pi and so on.
LC8805B-1515 is a IC addresable pixel integrated 1515 rgb smd led chip. LC8805B-1515 LED is a new 1515 pixel LED, it is 3 wires LED (5v, DAT, GND), it is LC8808B ic inside, which can be compatible with sk6805/ws2812, same function and same control way. each channel is 5mA, and LC8805B-1515 is 15mA per led.
LC8812B is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel.(lc8
Bollard lights are used in garden and driveway paths which gives an amazing outlook to your architectural landscape.
Side Led Bollard light with aluminium housing.
Construction in die-cast aluminium body.
Provided with highly efficient integral constant current led driver.
Applications : garden light, pathway, landscape lighting.
High lumen output with controlled power.
Total Current Harmonics Distortion is <10%
2 years warranty.
The lamp strip adopting the world's first built-in IC series lamp driving light emitting various XT1511 drive IC based plus a 104 capacitors. Driving lamp lamp panel looks very simple and beautiful, and the same XT1511 drive IC is a performance very stable brightness is very high. It is made of beads, high brightness, stable performance, surface appearance, concise, convenient production, low cost.
It is the ideal choice for lighting lighting outdoor lighting design.
1, Product type: XT1511 color light one meter 144L-144LED;
2, Light source: SMD 5050 LED;
3, Plate: FPCB;
4, Taiwan epstar chip, chip, and other chips in Taiwan;
5, IC model: XT1511, (1 m 144 IC, 1 IC 1 LED control lamp);
6, Gray level: 256, (1 m 144 pixels);
7, LED number: 144 lights / meters, every 1 lights for a group, you can cut;
8, Light emitting angle: 120 degrees;
9, Light emitting color: can be adjusted by the controller, white, red, yellow, blue, green, and so on;
