Sintered Titanium Powder Filter Suppliers and Manufacturers

Sintered titanium powder filter with a flange connector is a kind of porous filter element which is made of industrial high-purity titanium, after sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy to ensure filtration accuracy, and easy regeneration. It is suitable for the filtration of various corrosive media, such as hydroxide, seawater, aqua regia and the filtration of chloride solutions such as iron, copper, and sodium. Product name:Sintered titanium powder filter with flange connector Specifications:OD20 WT2.5-3.0 L200mm Filtering accuracy:30um Connector:Flange connector Packaging: Standard export wooden case or according to the customer's request Delivery: By sea & Air Shipping & International Express Lead time: Generally around 3-7 days for sample,7-15 working days for order, it's according to quantity. Advantage 1, Uniform structure, narrow pore size distribution, high separation efficiency. 2, High porosity, low filtration resistance, high penetration efficiency. 3, High temperature resistance, Normally can be sued up to 280 degrees. 4, Good chemical stability, acid and alkali corrosion, antioxidant properties. Applications 1. pharmaceutical industry, such as infusion, small injections, eye drops, oral liquid the filtration before the end. 2. impurity filter, decarbonization filter and precision filter during the productuon of medicine. 3. Security filter for UF system, RO system and EDI system in water treatment, and filtration after ozone sterilization. 4. Food and beverage industry such as drinks, juice, wine, beer, vegetable oil, mineral water, soy sauce etc.filtration. Packing and Delivery: In order to protect them from rubbing,make them wrapped with plastic bags respectively. kraft paper is used to fasten the plates together,protect them from scattering. Putting the foam in the wooden cartoon to protect them better while shipping. Finally put the goods into wooden cases.

Titanium powder sintered filter disc is made of industrial pure titanium powder (purity 99.6%) as raw material, which is formed by rolling the powder and then sintering at high temperature and high vacuum. There is no need to add any binder during rolling. Because the raw material is high-quality titanium powder, the titanium powder sintered filter has a uniform structure, a porosity between 30% and 40%, a filtration accuracy of 0.22 microns to 100 microns, and high separation and purification efficiency. High temperature resistance, acid and alkali corrosion resistance. The sintered products are laser cut or lathe cut according to the size and style required by customers. The main shapes are: round, square, hexagonal and special-shaped pieces. Product parameters Product name: Customized porous titanium powder sintered filter disc for beverage filtration Filtration accuracy: 10 microns Porosity: 35% Size: 40mm 40mm (customized) Applicable temperature: 300 Features 1. Porosity, good air permeability; 2. Depth filter; 3. Easy to clean and backwash, long service life; 4. Narrow pore size distribution; 5. High separation efficiency and good filtration performance; 6. Corrosion resistance. The main usage Mainly used for liquid-solid separation of beverages, reverse osmosis pre-filtration

Sintered titanium powder porous tube filters are advanced filtration solutions designed to effectively filter liquids across various industries. These filters are constructed using high-quality sintered titanium powder, offering exceptional performance, durability, and chemical compatibility. With their precise pore size distribution and resistance to high temperatures and pressures, sintered titanium powder porous tube filters ensure reliable and efficient liquid filtration. Specifications Material: Gr1 titanium powder Pore Size: From 0.2 to 100 microns Length: Customizable Outer Diameter: Customizable Operating Temperature: Withstands high temperatures up to 300�°C Chemical Compatibility: Compatible with a wide range of corrosive fluids and chemicals Features Superior Filtration Efficiency: Sintered titanium powder porous tube filters provide exceptional particle retention, ensuring efficient removal of contaminants and impurities from liquids. Robust and Durable: Constructed with high-quality sintered titanium powder, these filters exhibit excellent mechanical strength, enabling them to withstand demanding operating conditions and deliver long-lasting performance. Precise Pore Size Distribution: The sintering process ensures a uniform and precise pore size distribution, guaranteeing consistent filtration performance and preventing particle breakthroughs or uneven flow. Chemical Compatibility: Sintered titanium powder porous tube filters are compatible with a wide range of corrosive fluids and chemicals, making them suitable for diverse industrial applications. Temperature Resistance: These filters can withstand high temperatures, ensuring reliable filtration performance even in harsh operating environments. Application Chemical Industry Pharmaceutical Industry Petrochemical Industry Water Treatment Industry Electronics Industry

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Feature: the material contains a large number of connected or semi-connected pores, the pore structure is composed of regular and irregular powder particles, the size and distribution of pores and the size of porosity can be adjusted according to the powder particle size combination and preparation process to meet the actual needs of customers. 2.Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3.Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions.

The M20 connector titanium powder sintered filter cartridge is a type of filter material made through the sintering process using titanium powder. It typically has an M20 connector and is suitable for various filtration equipment and systems. Parameters Material: titanium powder Size: 50*400mm Pore size: 1micron Temperature resistance: â?¤300â?? Pressure resistance: â?¤Mpa3.0 Features High Filtration Efficiency: The M20 connector titanium powder sintered filter cartridge offers a high level of filtration efficiency, effectively removing fine particles, suspended solids, and impurities. Its porous structure and small pore size provide excellent filtration performance. High Temperature and Corrosion Resistance: Titanium material exhibits excellent high temperature and corrosion resistance properties. The M20 connector titanium powder sintered filter cartridge can operate stably in high-temperature and corrosive media, making it suitable for demanding industrial environments. Long Lifespan and Cleanability: The M20 connector titanium powder sintered filter cartridge has a long service life and can be extended through cleaning and restoration operations. Its cleanability allows for cost-effective and environmentally friendly use. High Flow Rate and Low Pressure Drop: The M20 connector titanium powder sintered filter cartridge features a large filtration area and porosity, enabling high flow rates. Additionally, its excellent flow characteristics minimize filtration pressure drop, reducing energy consumption. Applications Chemical Industry: The M20 connector titanium powder sintered filter cartridge is widely used in the chemical industry for filtering acids, alkalis, solvents, and other corrosive media to protect equipment and improve product quality. Food and Beverage Industry: The M20 connector titanium powder sintered filter cartridge is employed in liquid filtration applications within the food and beverage industry to remove suspended solids, particles, and microorganisms, ensuring product purity and safety. Pharmaceutical Industry: In the pharmaceutical industry, the M20 connector titanium powder sintered filter cartridge is used for filtering raw materials, intermediate products, and final products, guaranteeing cleanliness and purity. Electronics Industry: The M20 connector titanium powder sintered filter cartridge finds application in the electronics industry for filtering plating solutions, etching solutions, and other process liquids, removing impurities and particles to enhance product quality.

Product Introduction Stainless steel powder sinter filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1m-100m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:

Parameters Name: 1 Micron Sintered Metal Porous Filter Tube Material: Titanium powder Filter Rating:0.5um-50um Porosity:30-45% Penetrability:3-800M M hKPa Working pressure:2.0MPa Operating temperature:300 Properties 1. Pore stability, uniformity of diameter, and good separation effectiveness. 2. High permeability, low filtration resistance, and high porosity. 3. Excellent chemical stability, resistance to corrosion from acids and alkalis, and resistance to oxidation 4. Morphological stability, 5. Strong mechanical characteristics, 6. Has potent antimicrobial properties and is inert to bacteria. 7. Online regeneration, simple cleanup, and extended service life. 8. Excellent biocompatibility; 9. Outstanding electromagnetic shielding capabilities. 10. Good shock absorption and dampening.

Products Description Sintered copper powder filter element is also called sintered copper. Like titanium and stainless steel powder sintered filter elements, it is also a breathable porous material formed by molding, isostatic pressing, etc., and then sintered by high temperature vacuum. It is a new type of material used in filtration and high-tech industries. Due to the advantages of stable pores, good strength, large amount of dirt, can be directly processed on the substrate, can be cleaned, and can be customized according to the required shape and size, sintered copper powder filter element has been widely used in pneumatic cylinders, electronic accessories, hydraulic filter elements, air dust removal, and gas distribution. , heat sink, mold making and other industries. The selection of precision is very critical In the process of using the sintered copper powder filter element, the selection of precision is very critical. If you choose a product with a smaller precision, if there is no corresponding pressure, the product flow will decrease and cannot meet the flow requirements; if you choose a product with a higher precision, it will It cannot intercept the required impurity particles, and cannot achieve the effect of filtering or dust removal. If it is used in a high temperature environment, it will also have a certain impact on the performance of the product. Features 1. Sintered copper powder filter element has stable penetration and high filtration accuracy; 2. Can better withstand thermal pressure and impact; 3. High strength, good plasticity, anti-oxidation, corrosion resistance, good assembly; 4. Strong regeneration ability and long service life; 5. Sintered copper powder filter element is resistant to rapid cooling and rapid heat, and has better performance than filters made of paper, copper wire mesh and other fiber cloth, and is easy to assemble, disassemble and clean; 6. It can work at higher temperature and in corrosive medium, and can be welded, bonded and machined. Main application of the product 1. Pneumatic valve cylinders and other pneumatic components are used to filter air, remove impurities in the air or gas distribution, decompression, interception, etc., and are fixed and installed by interference, stamping, screwing, threads, and clamps. 2. Oil-gas separation, solid-liquid separation, and oil-removal impurity filtration and separation, according to experience, can operate continuously under a pressure of 20Mpa, and can effectively remove impurities in the pore size according to different conditions of precision and pressure.

Products Description The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M/MhKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filterï¼? 2. Orifice plate material for gas distribution fluidized bedï¼? 3. Filtration, washing and drying of materials in the pharmaceutical industryï¼? 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace. Note: 1. During the rolling process, the pressure of the rolling mill is very important, which affects the air permeability of the board. Yinggao has the personnel to carry out pressure rolling to ensure the air permeability is qualified. 2. The sintering time in the vacuum sintering process affects the service life of the board, so sufficient and appropriate sintering time is the key process of the sintering process.

Sintered titanium filters are manufactured using 99.6+ % pure titanium powders. Depending on the desired filter morphology, the powders are compressed through isostatic pressing, uniaxial pressing, or roll-compacting. The resulting green body is then subjected to sintering in a furnace to produce the final sintered filter. The titanium rod filter element utilizes corrosion-resistant titanium rods, making it highly resistant to high temperatures and impacts. It is non-toxic, does not shed particles or adsorb liquid components, and offers a long service life (typically 4-5 years). The titanium rod filter element is easy to clean and renewable. It employs deep filtration, forming a dense filter layer with gaps on the surface of the titanium rod, effectively filtering particles. Additionally, particles smaller than the pore size of the titanium rod can be tightly captured on the channel walls, enhancing the filtration accuracy. The titanium rod filter shell is constructed from high-quality 316L or 304 stainless steel, featuring a mirror-polished interior and exterior. Specifications: Diameter: �¤60mm Length: 1000mm Filtering accuracy: 100�¼m Interface type: M30 interface (can be made as required) Technic: Sintering Filtration Principle When the filter medium enters the filter cartridge through the liquid inlet, impurities are initially trapped by the surface of the titanium rod, forming a dense filter layer. This filter cake layer contributes to the filtration process. Simultaneously, particles smaller than the diameter of the titanium rod's pores enter the micropores on the rod walls. The intricate and circuitous nature of these curved and slender pores, combined with fluid flow-induced extrusion and collision, facilitates effective particle capture. This deep filtration occurs within the titanium rod, as impurities are intercepted on its outer surface and inner wall. The filtered material exits through the outlet. As impurities accumulate within the filter cartridge, the pressure increases. Regeneration of the filter titanium rod is required once the pressure reaches 0.3MPa. Features of Titanium Filter Cartridge: Compacted pre-graded Titanium powder: Sintered metal filters are constructed using precisely graded titanium powder. This powder undergoes compaction and sintering, a high-heat process that bonds the particles without melting them. The result is a robust, porous metal structure with exceptional strength and filtration performance. Welded end-caps prevent filtrate bypass: Titanium filters feature integrally welded end-caps, eliminating the risk of filtrate bypass. This ensures that all fluid passes through the filter media, maximizing filtration efficiency and preventing contamination of the filtrate. This leak-proof design is essential for maintaining process integrity and achieving reliable results.

Introduction: Porous Titanium Tube is crafted using industrial high-purity titanium powder (>99.6%) through a series of processes including powder classification, molding, sintering, and mechanical welding. The Porous Titanium Tube exhibits exceptional adaptability, allowing for adjustable porosity and filtration accuracy across a wide range. Featuring an open cell structure, Porous Titanium demonstrates great promise in the field of implant materials. Its remarkable attributes, such as a low elastic modulus, excellent bioactivity, biocompatibility, and the capacity for bone regeneration, make it an ideal choice for medical applications. At TOPTITECH, we provide a diverse range of Porous Titanium Tubes that cater to varying filtration precision requirements and dimensions. Additionally, our services extend to machining capabilities, enabling operations such as punching and cutting on sintered titanium tubes. For specific needs, we also offer Porous Titanium Tubes with one end closed. Specifications: - Material: Gr1 pure titanium powder - Filtration Precision: 30 Micron - Diameter: 150mm - Length: 40 inches (1000mm) - Porosity: 30-40% - Technique: Sintered Feature Porous titanium tubing offers high-temperature resistance up to 300�°C for normal use applications. It maintains strong mechanical properties with good plasticity, allowing for machining to customer specifications. This material demonstrates excellent corrosion resistance in harsh chemical environments. It can withstand oxidation and exposure to nitric acid, sulfuric acid, dilute hydrochloric acid, acetic acid, liquid hydrogen, and liquid nitrogen. Its uniform, stable pore structure coupled with precise filtration abilities delivers highly effective purification. No particle shedding occurs, preventing secondary contamination. The tubing also enables easy, repeated online cleaning through back blowing. Outstanding wear and impact resistance endow porous titanium with durable mechanical characteristics. Applications: 1. Chemical Processing: These filter tubes are used in chemical processing industries to remove impurities and ensure the purity of liquids and gases. 2. Petrochemical Industry: They play a crucial role in the petrochemical industry by filtering out contaminants and particulate matter from various fluids. 3. Pharmaceutical and Biotechnology: Porous titanium filter tubes are commonly used in pharmaceutical and biotechnology applications to achieve high levels of purity in drug manufacturing and sterile filtration processes. 4. Water Treatment: These filter tubes are utilized in water treatment systems to remove suspended solids, bacteria, and other impurities from water sources. 5. Food and Beverage: Porous titanium filter tubes find application in the food and beverage industry for filtration during the production of beverages, dairy products, and edible oils.

Product Introduction 1mm Thickness Titanium Sintered Metal Porous Filter Plate is a type of filter plate made of titanium metal that has undergone a sintering process. In the sintering process, titanium particles are heated to a high temperature and pressed together to form a porous structure. This structure contains small channels or holes that allow fluids or gases to pass through while capturing solid particles or impurities. The porous structure of the Titanium Sintered Metal Porous Filter Plate is typically created by using a powder metallurgy process. In this process, titanium particles are first compacted into a green body, which is then subjected to a high-temperature sintering process. During sintering, the particles fuse to form a solid mass with a porous structure. Titanium is a popular choice for sintered metal filter plates due to its excellent mechanical properties, corrosion resistance, and biocompatibility. The porous structure of the Titanium Sintered Metal Porous Filter Plate can be tailored to achieve specific filtration requirements, such as pore size, pore distribution, and permeability. Parameter Material: GR1 titanium powder Filtration precision:20um Porosity: 30-40% Operating temperature: â?¤300â?? Diameter: 100mm Thickness: 1mm

Product Introduction 30um titanium sintered porous metal filter tube is a type of filter made from titanium that is used to remove impurities or contaminants from a fluid or gas. These tubes are typically cylindrical in shape and have a porous structure that allows the fluid or gas to pass through while trapping any unwanted particles or substances. Titanium is a popular material for filter tubes due to its high strength, corrosion resistance, and biocompatibility. It is commonly used in a variety of industries, including aerospace, medical, and chemical processing. Titanium filter tubes can be customized to meet specific filtration requirements, such as pore size, flow rate, and filtration efficiency. They can also be designed to withstand high temperatures and pressures, making them suitable for use in harsh environments. Parameters Name:30um titanium sintered porous metal filter tube Brand: TOPTITECH Material: titanium powder Process: sintering Filtration precision:30um Size:�?30*80mm Porosity: 35% Features Corrosion resistance: Titanium is highly resistant to corrosion, even in harsh environments, making it an ideal material for filter tubes exposed to corrosive fluids or gases. High strength-to-weight ratio: Titanium is a lightweight, yet strong material, which makes it ideal for applications where weight and strength are important factors. Temperature resistance: Titanium has a high melting point and can withstand high temperatures, which makes it suitable for use in applications that involve high temperatures or thermal cycling. Customizability: Titanium filter tubes can be customized to meet specific filtration requirements, including pore size, flow rate, and filtration efficiency. This allows for greater flexibility in designing filtration systems that are tailored to particular applications.

Product Introduction The titanium rod filter element is made of industrial high-purity titanium powder (99.4%). No particle falling off, no secondary pollution of the original solution, in line with food hygiene and pharmaceutical GMP requirements. Good mechanical performance can be press-filtered or suction-filtered, and easy to operate. Low differential pressure, small footprint, and large flow. It can be regenerated online, is easy to clean, and has a long service life (usually several times that of membrane filter elements) Parameters Filtration accuracy: 0.22�¼m-100�¼m Porosity: 28-50% Air permeability: 0.02-20M3cm/m2h.mmH2O Compressive strength: 0.5-1.5Mpa Temperature resistance: 280�°C (wet state) Connection:M20 M30 M36 M42 215 222 226 DOE and customized Maximum working pressure difference: 0.6Mpa All specifications can be customized. Application With its unique performance, titanium rod filter element can be widely used in pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry and gas purification fields. Typical uses include: In the pharmaceutical industry, it is used for decarbonization filtration in the concentrated preparation of large infusions, small injections, eye drops, and oral liquids, and security filtration before terminal filtration in the diluted preparations. Impurity removal and filtration in the production process of raw materials, decarbonization filtration and fine filtration of materials. Security filtration of ultrafiltration, RO and EDI systems in the water treatment industry, filtration after ozone sterilization and ozone aeration. Decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultrafine fine particles and catalysts, precision filtration after resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. High-temperature decarbonization and white clay filtration in the dye industry.

Product Introduction Sintered porous titanium rod filter cartridges are unique because of their exceptional strength, durability, and resistance to corrosion. These filters are made by compressing and sintering titanium powder to form a solid tube with a precisely controlled pore structure. The resulting material is highly porous and provides excellent filtration efficiency and flow rate. Sintered porous titanium rod filter cartridges are designed to have a highly controlled pore structure, which allows for precise filtration of contaminants based on their size and shape. Parameters Material: metal titanium powder Outer diameter: �¤10 20 30 40 50 60 mm Length: 10 20 30 40 Filter connector: M20 M30 222 226 Filtration accuracy: 0.5um, 1um, 3um, 5um, 10um, 20um, 50um Working pressure: 0.1MPa 0.6MPa Working temperature: 300 Flow rate: 0.5m3/h 200m3/h Features 1. High efficiency: Sintered porous titanium rod filter cartridges have a high filtration efficiency, meaning they can effectively remove particles and contaminants of various sizes and shapes. 2. High flow rate: Sintered porous titanium rod filter cartridges can handle high flow rates without clogging, which is important in applications where a high filtration rate is required. 3. High dirt holding capacity: Sintered porous titanium filter tubes have a high dirt holding capacity, meaning they can hold a large number of contaminants before needing to be cleaned or replaced. Applications in harsh environments Sintered porous titanium filter tubes can be useful in harsh environments where other filters may fail due to extreme temperatures, pressures, or corrosive substances. For example, in the oil and gas industry, drilling operations often produce fluids that contain abrasive particles, corrosive chemicals, and high temperatures and pressures. Sintered porous titanium filter tubes can be used to filter out these contaminants and protect downstream equipment, such as pumps and valves, from damage. In the chemical processing industry, sintered porous titanium filter tubes can be used to filter out corrosive substances and maintain the purity of chemical products. These filters can withstand the harsh chemical environments and high temperatures and pressures that are common in chemical processing applications. Overall, sintered porous titanium filter tubes are suitable for use in a wide range of harsh environments, where they offer excellent filtration performance and durability.

Manufactured through compressing a metal powder matrix at approximately 7000 bar pressure and sintering at temperatures reaching 120°C, sintered metal powder filter cartridges offer exceptional resistance to bacterial attack and compatibility with a wide range of chemicals. These cartridges, made from sintered metal powder, possess excellent ductility, enabling them to handle high operating pressures. TOPTITECH presents advanced sintered filter elements that deliver outstanding filtration performance even in extreme temperature conditions. Also known as metal porous sintered filters, they are fabricated using titanium or stainless steel powder, making them a cutting-edge filtration material. These filters exhibit superior heat stress and impact resistance, allowing them to function in high-temperature environments and corrosive media. With any surface or depth media, sintered powder filter cartridges can achieve particulate capture efficiencies of 99.9% or higher. Depending on the specific metal alloy, they can operate at temperatures as high as 1000�°C. Specifications: - Filter media: SS 316L, SS304, Titanium, Hastalloy C-276, Inconel 625, Monel 400 - End cap: SS 316L, Titanium, Hastalloy C-276, Inconel 625, Monel 400 - Gasket/O-ring: Silicon, Viton, and customized - Types of caps: Both End Open, BSP / NPT threaded, and customized - Filtration rating: 0.2-200 Micron - Outer diameter: 5-300mm - Length: Customized up to 1500mm Features & Benefits: - Low-pressure drops, high dust capacity, and extended service life - Weldable end caps and connectors using Pulse Tig welding techniques - Smooth surface finish facilitating effective backwash for solid cake release - Compatibility with a wide range of process fluids Applications: - Pharmaceutical water, DM DI water - Solvents, fine chemicals, and process fluids - Catalyst recovery and activated carbon filter - Steam spargers, filters, and culinary steam filters - Fluidization, flame arrestors, flow restrictors, and vacuum filters

Product Introduction Customized titanium fiber felt for the fuel cellis a high-performance material made through a process of sintering titanium fibers. The result is a porous and lightweight material that is exceptionally strong and corrosion-resistant. The material is commonly used in industries such as aerospace, chemical processing, and medical equipment manufacturing. Customized titanium fiber felt for the fuel cell is a versatile and high-performance material that has a wide range of applications in and GDL. Its unique combination of properties, including high porosity, good electrical conductivity, and thermal stability, make it an attractive material for various industrial applications. Parameters Material: Ti Porosity: 50%-80% Size: 1000 2000mm Thickness: 0.2mm-1.0mm(0.2mm 0.4mm 0.8mm 1.0mm) Filtration rate: 10um 20um 30um and so on Features: Sintered titanium fiber felt is a unique material that possesses several features that make it ideal for various industrial applications. Firstly, the material has a high strength-to-weight ratio, making it an attractive choice for applications where weight is a critical factor. Additionally, sintered titanium fiber felt is highly resistant to corrosion, even inharsh environments, making it an excellent choice for chemical processing applications. The material is also highly durable and can withstand high temperatures, making it a suitable choice for aerospace applications.

Product Introduction Titanium metal powder sintered porous fluidized plate is formed by high temperature forming and sintering of metal or alloy powder and has a rigid structure. There are a lot of connected or partially connected pores in the substance. Powder particles that are both regular and irregular make up the pore structure. The size and distribution of the pores are related to the size of the particles. The porosity can be adjusted according to the combination of powder particle size and preparation process to meet the actual needs of customers. Advantages: Good permeability, controllable pore size and porosity, stable shape, high filtration accuracy, wear resistance, good mechanical properties, good thermal conductivity, good heat resistance, heat dissipation, backwashing, and repeated use. Titanium sintered porous materials are allowed to be used in the following environments: nitric acid of various concentrations (fuming nitric acid is prohibited), chlorine water, seawater, the aqueous solution of sodium hydroxide, carbonate, and chloride salt. Properties of Porous Titanium Materials High-temperature resistance, normal use 300 . Excellent plasticity, high mechanical strength, and machinability. Corrosion resistance, and anti-oxidation, can be used in nitric acid, liquid hydrogen, and liquid nitrogen environment. Good molding process, one-time molding processing can be carried out according to customer drawings. High filtration precision, good purification effect. No particles fall off, the interior structure is steady, and the pores are uniform. Good air permeability is easy to blowback and clean and can be regenerated online for repeated use. Wear-resistant and impact-resistant, good mechanical properties Production steps: powder sieving molding vacuum sintering