Proportional Valve Hydraforce Ts10 36 Suppliers and Manufacturers

For Hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36, AAK received official order from an old customer in the USA Last June, one of our old customers in USA placed a test order for a hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36. It is a screw-in, cartridge style, pilot-operated, spool-type, proportional pressure reducing/relieving valve which can be infinitely adjusted across a prescribed range using a variable electric input. The regulated pressure is proportional to the input electrical current. In Ningbo China, there are other hydraulic cartridge valve manufacturers who have this model, and AAK price is not the most competitive one, but because the valves that they purchased from AAK in the past have very stable quality, they do not want to take risk to try other hydraulic cartridge valve manufacturers, especially this is a proportional valve, which is not easy, so they still placed the trial order with AAK. Till now, it has been 1 year since the trial order was shipped. Last week, AAK received the official order of 200 pcs qty from the customer. The advantages of AAK Hydraulic Pressure Reducing/Relieving Proportional Valve E-TS10-36 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 56.8 lpm (15 gpm) Max.Control Current: 12 VDC coil - 1.10 A; 24 VDC coil - 0.55 A Relief Pressure Range (from zero to maximum control current): A: 6.9 - 207 bar (100 - 3000 psi) B: 6.9 - 159 bar (100 - 2300 psi) C: 6.9 - 117 bar (100 - 1700 psi) Cavity: VC10-3 AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve, benchmarking HydraForce TS10-36, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (805) 2024-07-15

For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from 2 customers after 1 year Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we received 6 inquiries and 5 trial orders from customers in Brazil, Russia and USA within 4 months. Till now, 2 of the customers have placed their re-peat orders. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (800) 2024-06-11

For Pressure Reducing/Relieving Cartridge Valve equivalent to HydraForce PR10-36 that AAK developed last March, is approved by the Russian customer after 1 year of testing Last March, we developed and shipped a Hydraulic pressure reducing/ relieving valve equivalent to HydraForce PR10-36 for a Russian customer. Today, we are very happy to receive the feedback from the customer that the E-PR10-36 Pressure Reducing/Relieving Cartridge Valve developed by AAK is still running very smoothly after 1 year, the performance is very stable. They are preparing the PO and will place their regular order of 500 pcs with us next week. AAK hydraulic cartridge valve E-PR10-36 two advantages: 1. Pressure Rating 210 bar (3000 psi), benchmarking HydraForce 2. Its service life is 2 times that of its domestic peers Technical parameters of AAK E-PR10-36 pressure reducing/relieving cartridge valve: Working Pressure: 210 bar (3000 psi) Proof Pressure: 390 bar (5700 psi) Flow Rating: 56.8 lpm (15 gpm) Pilot orifice: 0.51 mm (0.020 in) Temperature Range: -40�°C ~ +120 �°C (with Buna N seals) Fluids: Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt (50 to 2000 ssu) Cavity: 10-3 AAK E-PR10-36 pressure reducing/relieving cartridge valve, benchmarking HydraForce PR10-36, has been approved by customer in Russia after 1 year of testing. You are welcome to give it a try. AAK HYDRAULIC VALVES (793) 2024-04-23

Auto Proportion Valve PV4

Automatic Control Valve, Dual Setting Pressure Reducing Valve. Proportional Pressure Reducing Valve Work by Flow Rate (Model 132-090) controls pressure proportionally according as rate of flow. When rate of flow increase in pipeline, the valve operate higher pressure. When rate of flow decrease , the valve operate lower pressure. Therefore, Model 132-090 controls outlet-pressure proportionally according as rate of flow, even if the rate of flow change arbitrarily or slightly. Model 132-090 is optimized in waterworks, in state of smooth pressure change in pipeline. Also 132-090 have the function to prevent hunting itself.

In Ningbo, the hometown of hydraulic valves, conservatively speaking, there are more than 100 hydraulic cartridge valve manufacturers. 4 years ago, we began to contact HydraForce. AAK HYDRALUC VALVE lasted 2 years, replaced hydraulic valve materials 3 times and proofed 4 times, becoming the first hydraulic cartridge valve manufacturer supplier of HydraForce valves among so many hydraulic cartridge valve manufacturers in Ningbo. 4 years ago, I received a call from President Li, who is the agent of HydraForce valves in China. He said that from the hydraulic cartridge valve manufacturers in Ningbo, he heard that AAK HYDRAULIC VALVE have invested a lot of equipment and constantly innovated technology, and has a good benchmark in Ningbo among hydraulic cartridge valve manufacturers and asked if we are not interested in becoming a supplier of HydraForce valves. Everyone wants to cooperate with top 500 enterprises in the world. While agreeing, I am also a little nervous. I am worried that if the quality of hydraulic valves does not meet the standard, we would make jokes among these hydraulic cartridge valve manufacturers in Ningbo. The first entry point between us and hydraforce valves is a hydraulic cartridge valve. The AAK HYDRAULIC VALVE technical team spent 33 days and sent the approval sample of the hydraulic cartridge valve. We soon got a reply from HydraForce valves. They asked us to re-make sample, listed us those parameters to be improved, and also gave us some encouragement. At present, AAK HYDRAULIC VALVE parameters are among the top 3 of the hydraulic cartridge valve manufacturers in Ningbo. Since AAK HYDAULIC VALVE can represent the manufacturer of hydraulic cartridge valve in Ningbo, we must continue to overcome difficulties until the sample of hydraulic cartridge valve is approved. We constantly tested imported materials, replaced imported machine tools with higher precision, designed different fixtures, and assembled special equipment required for proofing. The 4th hydraulic cartridge valve has finally been recognized by HydraForce valves, and has also been affirmed by hydraulic cartridge valve manufacturers in Ningbo. AAK HYDRAULIC VALVE, in 2 years, replaced hydraulic valve materials 3 times and proofed 4 times, became the first hydraulic cartridge valve supplier of HydraForce valves among so many hydraulic cartridge valve manufacturers in Ningbo. AAK HYDRAULIC VALVE (94) 2021-10-25

After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02

For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19

Dual-function Hydraulic Cartridge Proportional Needle valve, AAK customized part replaced HydraForce standard part Devante is from a Spanish hydraulic equipment manufacturing company, and has been engaged in procurement for more than 5 years. Last February, they upgraded an injection molding machine, focusing on the selling point of "high speed when empty, low speed when heavy load". The engineer asked Devante to purchase the hydraulic cartridge proportional needle valve of HydraForce. During the equipment commissioning, it was found that the pressure relief and flow of the hydraulic system of the equipment was conflicted with the hydraulic cartridge proportional needle valve, resulting in unstable operation of the equipment and jitter. HydraForce said that there was no time to customize the hydraulic cartridge proportional needle valve. Devante contacted several cartridge valve manufacturers and had no news. Devante was very worried. Devante browsed AAK website on Google and left a message: 1. Can AAK customize the hydraulic cartridge proportional needle valve, and the performance benchmarking HydraForce? 2. The function of smooth flow passage is required. 3. The function of variable flow gain is required. At the beginning, I thought that he was requested for AAK hydraulic cartridge proportional needle valve to benchmark the standard parts of HydraForce, but it was turned out that he needed us to optimize the standard parts of HydraForce. According to the equipment abnormality video, the original hydraulic cartridge proportional needle valve drawing, and their required functions sent by Devante, after discussion, AAK engineers was 90% confident. Devante asked AAK to make samples. After 40 days, AAK sent 15 samples of cartridge proportional needle valves. 2 months later, Devante informed that the market promotion of the upgraded equipment was smooth. Their engineers were satisfied with AAK hydraulic cartridge proportional needle valves, especially its variable flow gain characteristics, and smooth flow characteristics, small pressure impact during pressure relief, and accurate flow control. We mainly made 3 ingenious actions on the valve housing and valve spool, and solved the problem that HydraForce didn't want to do. 1. The lower part of the valve spool is arranged in the valve housing and sealed with the valve housing line. The upper part of the valve spool is connected with the control cover plate, the upper end of the control cover plate is connected with the valve cover with threaded holes, and the displacement sensor is installed on the threaded holes of the valve cover. The lower end of the valve spool is connected with the upper cavity of the valve spool. When the valve spool is at the lowest end, the valve is closed. When the valve spool moves upward, the valve gradually opens.

servo proportional valve FRD.WJA5.021 Since its establishment in 2004, YOYIK has become an indispensable partner in heavy industries such as power plants and steel plants with its profound technical accumulation and industry experience. The company not only cultivates in the field of traditional power generation equipment accessories, but also actively expands technology and products in the field of new energy, demonstrating strong R&D strength and forward-looking market insights. By providing customized services and rapid response mechanisms, YOYIK has won wide recognition in domestic and foreign markets. We provide a wide variety of spare parts for power equipment, as listed below: #DF-servo proportional valve FRD.WJA5.021-DF Servo valve MOOG761-001 compact solenoid valve Z6206052 Impeller Nut CO46-09-27 centrifugal pump back pressure DFB125-80-300 servo valve PSSV-890-DF-0056A servo motor valve SM4-20(15)57-80/40-10-S182 pressure hose S100-AC-AC-0600 (G1/4) relief valve DBW10B-2-52/200-6EW230N9K4 r ddv servovalve S15FOFA4VBLN Hydraulic motor solenoid valve SV4-10V-0-6T-220AS high temperature solenoid valve PAT5002253 pressure relief valve YSF12-55/50-KJTH Seal/O-ring HB4-5861-2B variable piston hydraulic pump PVH074R01AB10A250000002001AE010A Fire resistant fuel recirculation pump F3 V10 1S6S 1C20 Accumulator inflation valve NXQ-100/90 Servo HY-SFF8.05 high pressure globe valves manufacturers WJ15F2.5P piston pump parts PVH098R01A250000002001AB010A Seals WJ01.37.106 Flat gate valve Z43H-200 n2 accumulator NXQA-2.5/31.5-L solenoid valve coil 22FDA-F5T-W220R-20/LB0 Pressure regulating valve DBDS15GIO/5/1 vacuum pump rear bearing M-209 pressure relief valve YSF8-55/25-TA lube oil accumulator 1.6L, PRESSURE: 20MPA Hydraulic accumulator nxq2-f40/31.5-H Butterfly valve oil engine sealing ring �?10*2 gear type oil pump GPA2-16-E-20-R6.3 sealing ring TRd8.687.546 Manhole O-ring HB4-56J8-171 AST solenoid valve seat 0508.919T0301.AW027 PRESSURE REDUCING VALVE DBDS10GM10/2.5 Needle valve NV-G1/4 Electromagnetic pump DFD-12-07-X servo proportional valve FRD.WJA5.021 servo proportional valve FRD.WJA5.021 MY-DFYL-2024-7-31

When using hydraulic valves with proportional drop function , The falling speed of the cylinder can be controlled by the stroke of the control handle .

INTER COOLER type: Turbo Air 6000 HSN: 84198940 TUBE PLATE : CARBON STEEL TUBE : Cu-Ni 90:10 FIN : ALUMINUM ALLOY SIDE PLATE : S.S. 304 REAR HEADER: CAST IRON Type P3793922-06001 Price USD: 12,390/Each

The Hydraulic Cartridge Needle valve that HydraForce can't make, AAK has done it in 30 days Rogelio is from Spain and we met 1 year ago. He sent inquiries about hydraulic cartridge valves to AAK for several times. Some time ago, he came to me and asked for help to make a batch of hydraulic cartridge needle valves. The hydraulic cartridge needle valve used on the hydraulic cold drawing machine they sold to Vietnam has expired the warranty period and needs to be replaced. This hydraulic cartridge needle valve is purchased from HydraForce, and it is not a standard part. HydraForce said that this valve was produced 2 years ago, it is out of stock now and will take 3-4 months to produce it. But the customer was not satisfied with this time frame and complained to his boss. In order to catch time, Rogelio contacted more than 10 Chinese manufacturers of hydraulic cartridge needle valves. They either could not benchmark with HydraForce, or they could not meet the time, so Rogelio was anxious. Rogelio remembered that AAK had supplied HydraForce for 9 consecutive years. He believed that I can help him. According to the hydraulic cartridge needle valve drawings provided by Rogelio, the production time is only 30 days. I told him that the lead time was only 30 days, and the manufacturing quality of hydraulic cartridge needle valve was up to the standard of HydraForce, few Chinese hydraulic valve manufacturers could meet these requirements. Rogelio thought that I was ready to give up, he was willing to give AAK 40 days and paid for 100 hydraulic cartridge needle valves the next day. 30 days later, AAK sent 100 hydraulic cartridge needle valves to their Vietnam factory. Rogelio informed by email last week that it was out of his expectation that AAK still completed the production in 30 days. Their customer was very satisfied with their replacement of the hydraulic cartridge needle valves. Rogelio also specifically mentioned that he had asked more than 10 hydraulic cartridge needle valve manufacturers, their lead time was at least 50 days and can not 100% guarantee to benchmark the manufacturing quality of HydraForce. AAK was the only one that could catch up with the delivery date and also benchmarked the manufacturing quality of HydraForce. For this non-standard hydraulic cartridge needle valve, AAK has 3 advantages, which are beyond the reach of most hydraulic cartridge valve manufacturers: 1.AAK adopts Japanese OKK ultra precision machine tool, and the machining accuracy of components can reach 0.01~0.3�¼m. The precision of shape and contour is 0.003 - 0.1�¼m. Its production efficiency is 30% higher, which is the cornerstone of AAK's ability to catch up the delivery. 2. AAK has been hydraulic cartridge valve ODM manufacturer of 3 world top 500 companies for 10 years. Its quality control process is more strict than the ISO certification system. We have been focusing on details and constantly optimizing technology.

AAK hydraulic relief valves won the PK from more than 30 hydraulic valve manufacturers by using 3 points for quality positioning Madison is from WHITE company in the United States. 1 year ago, he found AAK Hydraulic Valves through Google. He wanted to develop a hydraulic pilot operated relief valve. After 2 rounds of PK, AAK hydraulic valves stood out from more than 30 hydraulic valve manufacturers and received the trial order for 30pcs of hydraulic pilot operated relief valves. The trial order requires that all parameters must be benchmarked with HydraForce. I replied that AAK Hydraulic Valves is the supplier of HydraForce for 9 consecutive years. The quality of HydraForce is the most basic commitment of AAK. 1 month later, 30 samples of hydraulic pilot operated relief valves were sent out, and Madison had no response. I did't have any follow-up. As long as these samples are approved by the customer, the customer will actively feedback the test results and will come to re-purchase this hydraulic pilot operated relief valve. 1 year later, that is, yesterday, I received Madison's e-mail. I knew that it must be the re-order before I did not read the email. Madison said that after 1 year's use, AAK hydraulic pilot operated relief valve has reached the standard, and 800 more hydraulic pilot operated relief valves are needed. Madison also specifically mentioned that AAK hydraulic pilot operated relief valve is completely comparable to HydraForce in quality and function, and the internal leakage control is 20% higher than that of HydraForce, and the performance is more than 2 million times. In the past year, AAK Hydraulic Valve was the most satisfied hydraulic relief valve manufacturer of their entire technical team. Not only did the manufacturing quality match the standard of HydraHorce, but also the price was about 30% cheaper. I know that there are many hydraulic valve manufacturers in Ningbo, but there are not many hydraulic valve manufacturers such as AAK that insist on "high quality, excellent function and strong performance", perhaps not more than 3. In my early years, I understood the importance of choice from the Scrolls. One's greatest strength is the power of choice. Since its inception, AAK has made a quality positioning for hydraulic valves, which makes AAK become one of the suppliers of six top 500 enterprises in the world. AAK's strength mainly depends on 3 important points: human, machine and material: 1. AAK engineers have more than 20 years of industry experience, not only have strong design and R & D capabilities, but also know the details of each processing of products. 2. In terms of finishing equipment, AAK has the NP520X-F full-automatic universal grinder of Japan Long Island, which can achieve surface of the processed valve spool is like a mirror, and the precision control is excellent.

AAK uses the DMG five axis machining center imported from Germany, which improves the stability and accuracy by 30%. Less than 5% of the hydraulic valve block manufacturers in the domestic industry are equipped with this set of equipment. After suffering losses elsewhere, an American customer went back to AAK after 45 days to place the order for hydraulic valve blocks. Last December, I received an inquiry from American customer Joshua about a hydraulic valve block. At that time, I was a little surprised to see the accuracy requirements of the hydraulic valve block. The accuracy was 5% higher than that of HydraForce series. This was not a small challenge, but I was still confident. The next day, I sent quotation to Joshua directly. Joshua then said that it was 12% higher compared with other hydraulic valve block manufacturers, he could not place an order with AAK. After 45 days, Joshua asked us whether the last quotation of hydraulic valve block was still valid. If the original price is maintained, he will place the order for the hydraulic valve block. For the sincerity of cooperation, Joshua also frankly told why he moved the hydraulic valve block order to AAK. The original hydraulic valve block manufacturer made samples for two times, and the parameters of each hydraulic valve block were not very stable. Some hydraulic valve block sample had very good accuracy, while others were very poor, which wasted 3 weeks of time. Joshua also checked with other manufacturers. All of them are not confident to achieve the accuracy that is 5% higher than that of HydraForce series. Another 2 weeks were wasted again. The customer was very angry that the order has been placed for 5 weeks, but the sample of the hydraulic valve block still could not be approved. Joshua felt that only AAK can make the sample successfully at one time. Even if it is 12% more expensive, it is acceptable. Aware of Joshua's dilemma, we specially spare a high-precision DMG five axis machining center lathe to arrange the proofing of this hydraulic valve block. A week later, AAK sent the hydraulic valve block samples. After 10 days, there was still no feedback from Joshua about the hydraulic valve block samples. We asked Joshua to know that he was also waiting nervously. Until Joshua's email last week, we know that his customer was very surprised that the accuracy of this hydraulic valve block sample not only exceeded 5% that of the HydraForce series, but the parameter stability of AAK hydraulic valve block was also more than 30% higher than that last time. Frankly, we were not surprised by this data, because more than one customer was surprised by the accuracy parameters of AAK hydraulic valve blocks. The reason why the accuracy of AAK hydraulic valve block exceeds 5% of HydraForce series is that it firstly benefits from the continuous updating of the equipment. When the vast majority of hydraulic valve block

For Hydraulic Electro-Proportional Priority Flow Control Valve Cartridge equivalent to HydraForce PV72-30, received re-order from client This Monday, we launched an Electro-Proportional Priority Flow Regulator Valve Cartridge equivalent to HydraForce standard part PV72-30. It is a solenoid operated, pressure compensated, spool type, normally closed, proportional priority flow control valve. The features of this proportional priority flow control valve: Excellent linearity and hysteresis characteristics. Optional coil voltages and terminations. Efficient wet-armature construction. Cartridges are voltage-interchangeable. Unitized, molded coil design. Coil waterproofing standard. Manual Override option. A customer in placed a test order for 10 pcs last June in 2022. After 1 year of testing, it proves that the function and performance of hydraulic proportional priority flow control valve benchmarked the quality of HydraForce PV72-30. Today, we received their re-peat order for 1,000 pcs qty. hydraulic solenoid operated proportional priority flow control valve 2 advantages: 1. Internal leakage: 0.38 lpm Max. at 207 bar (3000 psi), 0 current, benchmarking HydraForce 2. Its service life is 2 times that of its peers Technical parameters of E-PV72-30 hydraulic solenoid operated proportional priority flow control valve: Max. Operating Pressure: Port 1: 240 bar (3500 psi); Port 2 and 3: 207 bar (3000 psi) Flow: See PRESSURE DROP VS. FLOW graph Internal Leakage: 0.38 lpm (0.1 gpm) Note: Max. at 207 bar (3000 psi), 0 current Cavity: 12-3 The newly launched E-PV72-30 hydraulic solenoid operated proportional priority flow control valve, benchmarking HydraForce PV72-30, has been approved by customer in after 1 year of testing. You are welcome to try it out.

For Solenoid Cartridge Valve equivalent to HydraForce SF08-22, a new Italian customer placed the trial order with AAK Last Friday, a new Italian customer had an online video conference with us, as well as visited our factory via the video. Actually, the customer tried to visit our factory in person. Due to the schedule conflicts, they had to visit us online. During the meeting, the customer placed the trial order for 3 hydraulic solenoid cartridge valves equivalent to HydraForce standard parts, one of them is SF08-22, which is a solenoid operated, poppet type, normally closed (energized: bidirectional flow) two way cartridge. It is intended for use in mineral based or synthetic (with lubricating properties) hydraulic fluids as a low leakage in higher pressure load-holding applications. In Ningbo China, there are only a few hydraulic cartridge valve manufacturers who have this model. Today, we delivered the test order samples for all 3 models. It may take 2 â?? 3 months for customers to test them at their applications. We are confident that there will be good news from customer at the end of this year or early next year. AAK hydraulic solenoid cartridge valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SF08-22 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 350 bar (5000 psi) Flow: 40 lpm (10 gpm) Internal Leakage: 3 drops/min max. at 350 bar (5000 psi) Operating Fluid Temperature: - 40�°C ~ 120�°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SF08-22 Hydraulic solenoid cartridge valve, benchmarking HydraForce SF08-22, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (821) 2024-11-04

For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, Russian Customer placed annual order with AAK again Early Last year, a Russian customer placed their trial order with AAK for a hydraulic solenoid cartridge valve equivalent to HydraForce SV12-34. It is a solenoid operated, two position, three way, direct acting spool valve. Last November, for the testing result was very good, the customer was very happy and placed their annual order with us for the year of 2024. 1 year has passed, they received positive feedback from market, the sales for this hydraulic solenoid cartridge valve are very stable and they are going to be out of stock in 2 months. Per customer, they will place their annual order with us for E-SV12-34 next week for the sales in 2025. AAK hydraulic solenoid cartridge valve E-SV12-34 two advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-34 hydraulic solenoid cartridge valve: Max.Pressure Rating: 240 bar (3500 psi) Flow Rating: 60 lpm (16 gpm) Max. Internal Leakage: 410 cc/minute (25 cu. in./minute) max. at 207 bar (3000 psi) Temperature: - 40 ~ + 120 (Std. Buna N Seals) Cavity: VC12-3 AAK E-SV12-34 hydraulic solenoid cartridge valve, benchmarking HydraForce SV12-34, has been approved by customer in Russia. its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (819) 2024-10-21