Find Verified Olefin Co Polymer Viscosity Improvr Suppliers, Manufacturers and Wholesalers

Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).

4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /

Polypropylene Co-Polymer resins primarily made from battery and industrial waste, with black color, suitable for injection applications, MFR 10.0-12.0 g/10min-2.16kg @230 C. degree.

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade. Guar has now assumed a larger role among the domesticated plants due to its unique functional properties. India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds. Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average. Composition is: Hydrocolloid: 23% Fats: 40% Proteins: 34% The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .

PET polyester chips/ PET bottle grade chips PET chip is TPA-based polyethylene terephthlic copolymer designed for various applications, especially for the bottle like drinking water & food container. It is a high molecular weight polymer with an 0.80 intrinsic viscosity. Applications: Used for packing bottles for drinking water such as pure water, natural mineral water and distilled water etc. The products are good processing performance. Mineral water, edible oil, hot fill bottle grade, food bottle grade Bottle-grade polyester chips are suitable for making the packing bottles for pure water, natural mineral water, distilled water, drinking water, flavoring and candy containers, PET sheet material etc

Dadmac (Quaternary Ammonium Monomer) DADMAC is a high purity, aggregated, quaternary ammonium salt and high charge density cationic monomer. Its appearance is colorless and transparent liquid without an irritating smell. DADMAC can be dissolved in water very easily. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction. The features of DADMAC are: very stable in normal temperature, unhydrolyzed and noninflammable, low irritation to skins and low toxicity. Use: It can be used as cationic monomer to produce mono-polymer or co-polymers with other monomers. The polymers can be used as formaldehyde-free color-fixing agent in the textile dyeing and finishing auxiliaries, film forming on the fabric and improve the color fastness; In paper-making additives can be used as retention agent, paper coating anti-static agent, AKD sizing promoter; Can be used in decoloring flocculation in the process of water treatment and purification with high efficiency and non-toxic;In daily chemicals, can be used as shampoo combing agent, wetting agent and the anti-static agent; In oilfield chemicals can be used as clay stabilizer, cationic additive in acid and fracturing fluid and so on. Its main role is electric neutralization, adsorption, flocculation, cleaning, decoloring, especially assynthetic resin modifier for conductivity and anti-static property. Applications: Water Treatment Paper Textile & Dyeing Oil drilling Mining CodeItem AMZCD101 AMZCD102 AMZCD103 Appearance Clear transparent liquid Solid Content 601 615 651 pH 5070 ColorAPHA 50 NaCI 20

Diethylene glycol is an organic compound. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. Compared to MEG, it has a higher boiling point, viscosity and specific gravity. Application: Polyester resins, polyurethanes, plasticizers, Antifreeze additive, Unsaturated polyester resins, Softening Agent, Solvents Coupler, Heat transfer agents or fluids, Chemical intermediates etc. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Appearance : colorless Purity: 99.8 wt % min MEG: 0.05 wt % max TEG 0.05 wt %: max Water: 0.05 wt % max Colour (pt-Co): 10 max Specific Gravity, 20/20 C: 1.1175-1.1195 5% vol: Min 242 C 95% vol: Max 250 C Acidity (as acetic acid): 50 mg/kg max Ash: 50 mg/kg max

Cosmetic: PVP-K series can be used as film-forming agent, viscosity-enhancing agent, lubricator and adhesive in hair sprays, mouses, hair-fixing gels and colution. They are also useful auxiliary materials in skin-care product, hair-dying reagent, shapoo, lipstick, deodorant, sunscreen and dentifrice. Pharmaceutical: PVP-K30 (pharmaceutical grade) is a kind of new excellent pharmaceutical excipient. It is mainly used as binder for tablet and granule, dissovlving assistant for injection, flow assistant for capsule, dispersant for liquid medicine and pigment, stabilizer for enzyme and heat-sensitive drug, co-precipitant for poorly soluble drugs, lubricator and antitoxic assistant for eye drug. PVP has been used as excipient in more than one hundred drugs. Other Utility: Suspensant, dispersant and emulsifier disinfector Paint and coating Printing ink Textile and dyestuff Building material Paper making TV kinescope Polymer ultra-filtration membrance, micro-filtration membrance Glass fiber

Sodium polyacrylate is a white powder. Odorless and tasteless. Very hygroscopic. Polymer compounds with hydrophilic and hydrophobic groups. Slowly dissolves in water to form a very viscous transparent liquid. The viscosity of its 0.5% solution is about Paâ?¢s. The viscosity is not caused by water absorption and swelling (such as CMC, sodium alginate), but due to the many anionic groups in the molecule. The ionic phenomenon causes the molecular chain to grow and the viscosity increases to form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heat treatment, neutral salts, and organic acids have little effect on its viscosity, but when it is alkaline, the viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. The long-term viscosity changes very little, and it is not easy to decay. Because it is an electrolyte, it is susceptible to the influence of acid and metal ions, and the viscosity is reduced.

Bicomponent fibers are defined as fibers produced by extruding two different polymers from the same spinneret, allowing both polymers to coexist within a single filament. This innovative structure provides unique properties that neither polymer could achieve on its own. A related term, "co-spun fiber," refers to filaments made from different polymers, with each filament containing only one component. In some regions, particularly in Asia, the term "conjugate fibers" is used interchangeably with bicomponent fibers. The primary goal of creating bicomponent fibers is to harness the distinct capabilities of each polymer to enhance performance and functionality. One notable example of bicomponent fibres is those constructed with a polyethylene sheath surrounding a polypropylene core. These fibers are crucial in the nonwoven fabric market, offering benefits such as improved durability, resilience, and thermal bonding properties.

PET Chip for Spunbond Non-Woven Fabric Semi-dull Grade Specialty Polymer for Nonwovens Product Description: Our non-woven fabric polyester chip is a high-viscosity PET material designed specifically for the production of spunbond nonwoven fabrics. Unlike traditional textile production processes, nonwovens are created directly from fiber or polymer without the need for yarn spinning. PET chips are an essential raw material in this process. This newly developed polymer is widely used in various industries, including medical treatment, home decoration, filtration materials, and insulating materials. The high-viscosity PET chips offer enhanced device performance and flexible polyester capacity, significantly improving the quality of non-woven products. Key Features: High Intrinsic Viscosity (IV): The intrinsic viscosity of regular polyester chips typically ranges between 0.64-0.68 dl/g. Our high-viscosity chips reach an IV of 0.71 dl/g, offering improved durability and product performance. Stable Carboxyl Terminal Value and Melting Point: Ensures consistency and quality during the manufacturing process. Enhanced Non-woven Product Quality: The high-viscosity nature of the chips improves the overall strength and reliability of the final non-woven fabric. SPECIFICATIONS: Intrinsic Viscosity: 0.711 dl/g Colour Value: L: 83.2 b: 5.9 COOH Content: 25.8 mol/t DEG Content: 1.14% Melting Point: 261.0C Water Content: 0.05% Ash Content: 0.03% Irregular Chip Content: 0% Powder Content: 0% TiOâ?? Content: 0.29% Weight (g/100 chips): 2.918 g Remarks: IV Testing Method: The solvent used is a 1:1 mixture of phenol and tetrachlorethane, tested at a temperature of 25C. Testing Standard: Complies with GB/T 14190-2017.