Melamine cladding ammonium polyphosphate Appearance White powder Whiteness (reflectance), % 92 min Ph, 10% slurry, 25¦ 7.5-9.0 Solubility , 25¦, g/100mlh2o 0.15 max Total nitrogen, % 18.0 min Phosphorus (as p2o5), % 68.0 min True density, g/cm3 About 1.9 Viscosity, 10% slurry, 25¦, mpa.S 20 max Degree of polymerization 1000 min Thermal decomposition onset, scan rate 30¦/min, ¦ 290 min Average particle size, 50%pass, um 10-25 Particle size, 98%pass, um 15-43 Key properties: Gd-app102 melamine cladding ammonium polyphosphate is gd-app101ammonium polyphosphate modified by melamine on the surface. 1, very low water solubility -gd-app102 has low water solubility that is no more than 0.10g/100mlh2o at 20¦, which makes it useful in application where the product is exposed to high humidity conditions or water. 2, high phosphorus content and nitrogen content-gd-app102 contains 68.0% phosphorus (as p2o5) and 18.0%nitrogen which makes it a very effective fire retardant. 3, low viscosity +c viscosity of gd-app102 is below 20mpa.S. 4, thermal decomposition onset that is above 295¦, which makes it be widely used to plastic with different melt-point temperature. 5, non-halogen-gd-app102 is a highly effective non-halogen fire retardant. Applications: Gd-app102 is an effective fire retardant for applications such as: 1, intumescent latex and solvent based paints. 2, polymer systems such as polyethylene, polypropylene, polyurethane, rubbers, acrylics, polyterephthalate. 3, building materials such as wall coverings, ceiling tiles, roofing products, 4, wall panels, wood chip board. Fiber drum, kraft bag, woven pvc bag(polyethylene liner)
Epoxy resin cladding ammonium polyphosphate Appearance White powder Whiteness (reflectance), % 94 min Ph, 10% slurry, 25¦ 5.5-7.5 Solubility , 25¦, g/100mlh2o 0.1 max Total nitrogen, % 18.0 min Phosphorus (as p2o5), % 68.0 min True density, g/cm3 About 1.9 Viscosity, 10% slurry, 25¦, mpa.S 20 max Degree of polymerization 1000 min Thermal decomposition onset, scan rate 30¦/min, ¦ 290 min Average particle size, 50%pass, um 10-25 Particle size, 98%pass, um 20-43 Key properties: Gd-app103epoxy resin cladding ammonium polyphosphate is gd-app101 Ammonium polyphosphate modified by epoxy resin on the surface. Characteristic of gd-app103: 1, reduce water solubility; 2, reduce air hygroscopicity; 3, reduce viscosity in water; 4, obviously improve dispersibility and compatibility with plastic materials; 5, increase fluidity of powder; 6, improve thermal expansion efficiency during inflaming retarding process. Applications: Gd-app103 is an effective fire retardant for applications such as: 1, various kinds of expanding fire-refractory coating; 2, thermal plasticity polyolefin and unsaturated arene plastic; 3, isocyanurate foam; 4, epoxy resin and unsaturated resin; 5, cable and rubber; 6, plastic material of electron device. Fiber drum, kraft bag, woven pvc bag (polyethylene liner)
Ammonium polyphosphate Appearance White powder Whiteness (reflectance), % 92.0 min Ph, 10% slurry, 25¦ 6.0-7.5 Acid value, mgkoh/1gapp 1.0max Solubility in water , 25¦, g/100mlh2o 0.50 max Total nitrogen, % 14.0-15.0 Phosphorus (as p2o5), % 72.0-74.0 True density, g/cm3 About 1.9 Bulk density, g/cm3 0.6-0.7 Viscosity, 10% slurry, 25¦, mpa.S 80 max Degree of polymerization 1000 min Thermal decomposition onset, scan rate 30¦/min, ¦ 285 min Average particle size, 50%pass, um 5-25 Particle size, 98%pass, um 10-43 Key properties: 1, low water solubility gd-app101 has low water solubility which makes it useful in application where the product is exposed to high humidity conditions or water. 2, high phosphorus content -gd-app101 contains 72.5% phosphorus (as p2o5) which makes it a very effective fire retardant. 3, nearly neutral ph-gd-app101 can be neutralized or brought to the alkaline side by the addition of small amounts od ammonium hydroxide. 4, non-halogen-gd-app101 is a highly effective non-halogen fire retardant. Applications: Gd-app101 is an effective fire retardant for applications such as: 1, intumescent latex and solvent based paints. 2, intumescent mastic, caulks and putties. 3, polymer systems such as polyethylene, polypropylene, polyurethane, 4, rubbers, acrylics, polyterephthalate. 5, building materials such as wall coverings, ceiling tiles, roofing products, wall panels, wood chip board. Fiber drum, kraft bag, woven pvc bag(polyethylene liner)
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
3ply face mask comfortable for user. The face mask is latex free and use brand new hypoallergenic material, odourless and lint free. Product Disposable 3-Ply Non-Woven Face Mask with Ear Loop Size 18cm x 9.5cm (18cm after expended) Color Blue/Green/White/Yellow/Pink or can be customized Outer Layer Spund-bound PP Nonwoven: 20 - 25 gsm Filter Medium Meltblown PP Nonwoven: 18 - 20gsm Inner Layer Lint free ES Nonwoven: 25 gsm Nose Piece Aluminum Packaging 50 pieces per box or 50pcs per bag; 10 boxes/bags per carton. 1600 cartons/20 ft container , 3200 carton/40 HQ container. MOQ 50,000 pieces min order Quantity: 10,000PCS/Day MOQ : 10,000 pieces Packaging: 50 pieces per box/bag; 40 boxes per carton. Payment condition: TT Shipping Duration: 7 Days ( ONE WEEK) Origin: Thailand/China Condition: Subject to availability
Product Name Fashion Consumable Personal Protection Particulate N95 Mask Material Non woven fabric+ Melt Blown Filter+ Non Woven Fabric Shape Molded Cup/Cone Application Farm buildings, Mining, Weaving,Polishing,Pharmacy,Hardware,Cement Size 190*130mm Carton size 310*200*145mm Packing details 50pcs/Carton Product's details Adjustable aluminum nose clip to offer better fit
Jumbo Bags : Name : Big bag/Bulk bag/Jumbo bag/FIBC/Super sack/Ton bag Raw Material : Polypropylene virgin material Color : White, blue, Beige, or whatever Printing : Onside or both sides in multi-colors,offset print color print Size : As the customers requirement Type of bag : U-panel,Circular,baffle Weave : 10x10,12x12,can be customized or as the customer requirement Denier : 700D to1000D Weights/m2 : 120gm to 240 gm or as the customers requirement Feature : Breathable and airy, anti-static, UV stabilization, reinforcement dust-proof, moisture- proof Sealing : Single/double fold saw bottom Top Filling : Top full open,top skirt,top filling spout Bottom : Flat bottom,discharge spout Saftey factory : From 3:1 to 6:1 Liner : coated or with liner bag for moisture proof Usage : sand,cement, chemical,mineral,sugar,food,flour,etc. Packing : 20pcs/bundle(bale), or as the customized MOQ : Above 1000pcs Delivery Time : 20-30 days after place an order Trade Term : FOB Payment Term : T/T