We bring to our esteemed clients a range of innovative Sheet, Plates & Coils that have been developed to meet the requirements of the changing trends. These efficient Sheet, Plates & Coils are used in a various mechanical and general engineering industries.
1518 Anodes Of 88 Kg Each With A Total Of 121.5 Tons. Approx. Value Usd917.05 Ex Work Mine. Skills Requirement Anodes: Technical Description: 1. The Surface Of The Anode Plate Is A Lead-based Alloy Rolled Plate, And The Composition Of The Lead Alloy Plate: Sn: 0.8â?¡0.02%, Ca: 0.08-0.1%; 2. Lead Raw Materials Used In Lead Alloys Are Pb 99.99 Lead Ingots Specified In Gb/t 469: The Chemical Composition Of Copper Conductive Beams Is T2 Red Copper Specified In Gb5231; 3. The Quality Of Lead Alloy Plate Refers To Ys/t 498-2006, The Surface Is Smooth, Clean And Flat, No Cracks, Layers And Slag Inclusions Are Allowed; 4. The Thickness Of The Lead-coated Layer Is Uniform And Tightly Bonded With The Copper Rod, The Surface Is Smooth Without Flash, Burr, Pores And Inclusions, And The Surface Has No Deep Scratches; 5. The Welding Seam Is Welded By The Reverse Button Method (the Plate And The Beam Have Dovetail Grooves) To Ensure The Welding Seam Of The Beam And The Plate Is Firm.
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
Unik brand unformed lead plates din type 18 or 19 tubes or bs type 15 tubes suitable for forklift / golf cart etc. (traction & semi traction) batteries. Seaworthy cartons stacked in fumigated wooden pallets
Lead slag produced from rotary furnace lead percentage is 20 to 25%
Lead powder and lead concentrate are different forms of lead that serve various industrial purposes. Here's an overview of each: Lead Powder: Form: Lead powder refers to finely ground particles of lead metal, typically in powder or granular form. Uses: Battery Manufacturing: Lead powder is often used in the production of lead-acid batteries. Radiation Shielding: Lead is known for its ability to absorb and shield against radiation, and lead powder can be used in various applications where radiation protection is required. Ammunition: Lead powder is a component in the production of ammunition and bullets. Metal Coatings: It may be used in the manufacturing of certain types of paints and coatings. Lead Concentrate: Form: Lead concentrate is a raw material derived from the mining and processing of lead ores. It is not a pure form of lead but rather a mixture containing lead and other minerals. Composition: Lead concentrate typically contains lead sulfide (galena) as the primary mineral, along with other sulfide minerals. Processing: The lead concentrate is further processed through smelting to extract pure lead metal. Uses: Lead concentrate is a crucial intermediate product in the production of refined lead. It is an essential raw material for lead smelters, where the lead is separated from impurities and processed into the desired forms. Lead concentrate may also contain valuable by-products such as silver and zinc.
Pure Lead Ingots (99.97% to 99.985%) Lead Selenium Alloys Lead Antimony - Arsenic Alloys Lead Calcium Alloy Lead Tin Alloys Special Custom Alloys as per specification We have Inhouse Spectro Laboratory and QA/QC team. We have the capability to manufacture any custom lead alloys as per customer requirements and assure supply consistency and in-house logistic team to arrange delivery on Ex-Factory or CIF/DDP to your facility around the world.
We can manufacture multiple grades, thickness and size of lead sheets used for medical purposes, scientific & research organizations, and industrial application as per our customer requirements.
Lead Ore
We can manufacture any custom lead products that may be used in Marine & Fishing Industry, Medical, Industrial, Research and other Defense & Military applications. We have in-house capability for design and molding as per customer requirements
item value Place of Origin UK Model Number lead ingot Dimensions 25kg Chemical Composition Sb Sn Zn Fe Cd Pb (Min) 99.99% Alloy Or Not Non-Alloy Secondary Or Not Non-secondary Product name Lead Ingot Pb99.99 Grade and Specification ASTM B749-03 Lead content 99.99% 99.98% 99.9% 99.5% 99.8% Keyword 99.994% High Purity Lead Ingot Color Silver White Packing Customer's Requirements Purity 99.97%Min
Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality. They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.
Product Name Lead ingot sheet/plate Materials GB:Pb1, Pb2, Pb3, PbSb0.5, PbSb2, PbSb4, PbSb6, PbSb8,PbSb3.5, PbSn4.5-2.5, PbSn2-2, PbSn6.5ASTM: UNSL50006, UNSL50021, UNSL50049, UNSL51121, UNSL53585, UNSL53565, UNSL53346, UNSL53620, YT155A, Y10A �?�¡�¢ï¼?C0ï¼?C1ï¼?C2ï¼?C3ï¼?ETC Brinell Hardness 5.0 HB=38.3 MPa Length As required Width 600-2200mm as required Thickness 0.3-500mm or as required Application Anti Radiation ,X-Ray Shielding.X-Ray Room,DR Room,CT Room, Use of a safety beam to ensure safe access of persons
Lead acid battery plates.
We deals in the following products :- 1) Lead Ingots 2) ZInc Ingots
1980 Cathodes of 42 kg each with a total of 83 tons. Approx. value USD467.17 ex work mine. Skills requirement Cathodes: Technical Description: Board surface: 316L stainless steel, surface finish: 2R (Ra0.30-0.50um), there should be no micro-cracks and no obvious scratches or scratches on the board surface, and no deformation such as unevenness, delamination, etc. is allowed. The flatness of the board surface is less than or equal to $1.5mm, the plumbness of the board surface: the error at the bottom of the board surface is less than or equal to 3mm, and the difference between the diagonal lines is less than or equal to $1.5mm. Conductive rod (steel-copper composite rod): The conductive rod is clad with copper, the copper is T2 electrolytic copper, and the steel is 316L stainless steel. The center line of the conductive rod coincides with the surface of the board, and the perpendicularity (drape) of the board surface and the conductive plane of the conductive end is +3mm; the parallelism of the two conductive planes of the end of the conductive rod is $0.5mm. The bottom milling "V°-shaped groove is opened, and the conductive beam and the stainless steel plate are fully welded by fully automatic laser on both sides.
Nigeria is one of the Africa countries with abundant lead natural resources deposits and minerals. Lead is a metallic element primarily produced from the mineral, galena. Most mineral ore contains lead with only about 3 of these minerals commercially viable, they are galena, cerussite, and anglesite and are mostly found in conjunction with other metals like zinc and silver. We have the capacity to supply more than 1000MT monthly.
Are you in search of a reliable source for high-quality lead? We have the perfect solution for you! We are delighted to offer you top-notch lead (Pb), tailored to your specific requirements. Here are all the details: **Details and Characteristics:** - Product: Lead (Pb) - Shipping Port: To Be Announced (TBA), Peru - Origin: Peru - Dispatch Quantity: 10,000 metric tons per month (120,000 metric tons per year) or even more! - Price: FOB (Free On Board) -17% according to the LME (London Metal Exchange) - Net Price after Commissions: 14% - Seller Side Commission: 1.5% (Closed) - Buyer's Side Commission: 1.5% (Open) - Delivery Time: 45 days from the issuance of the Bank Instrument - Contract Duration: From 1 to 3 years - Payment Terms: 100% FOB upon presenting SGS and sales documents reflecting the mineral's value based on the LME valuation of the day. Payment will be made via bank transfer, along with the issuance of a non-transferable Letter of Credit in "MT 760" (SBLC) format in favor of the Seller. We are committed to providing you with a consistent and reliable supply of lead, and we are ready to tailor our offering to meet your specific needs and preferences. Please do not hesitate to get in touch with us if you have any questions or need additional information! Our dedicated team is here to assist you in every way possible. Thank you for considering our offer. We eagerly await the opportunity to collaborate with you. Your satisfaction is our priority, and we are confident that our product and terms will exceed your expectations.
Can be cater made to suit requirement at Constructions ( Plumbing and Roofing), Foundation ( Shock observer), Copper Recovery Refineries, Ferrous Tank Linings and for Radiation protection ( Hospitals and Nuclear plants)
We can manufacture custom lead and lead alloy wires as per our customer requirements. Lead wire is used for a variety of applications such as lead anodes, lead weights, lead cable sheathing and manufacturing of various mechanical and industrial parts
