A slurry pump refers to a machine that increases the energy of a solid-liquid mixed medium through the action of centrifugal force (the rotation of the pump's impeller), and is a device that converts electrical energy into kinetic energy and potential energy of the medium. Mainly applicable to: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industries.
Product Name: Heavy duty trash can liners Material: HDPE/LDPE Sealing & Handle: Hot sealing Surface: Gravure Printing Color: Black,Red,Green,Blue,Clear,or Pantone color as choice and Customize Size: Custom LOGO Usage: Garbage&household & grocery etc.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
Heavy Duty Plastic Bin Bags Disposable Garbage Bags Plastic Packing Bags Black Color from Thailand
Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains high eï¬?ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant. Pump range: Discharge Size: 1" to 18" Capacity: 4 to 5400 m³/h Heads: 5 to 75 m Typical application: - Mill discharge - Coarse sand - Tailings - Mineral concentration - Heavy media - Coal washing - FGD - Process chemical - Bottom / fly ash - Metal smelting Product features; - Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life - Large diameter, high eï¬?ciency impellers designed to oï¬?er maximum wear life and low operating cost, wide options of impeller for speciï¬?c applications - Gland, expeller or mechanical seals are available to suite diï¬?erent working conditions - The bearing can be grease or oil lubricated which oï¬?er ease of maintenance and reduced downtime - The pump can be installed in multi-stage high pressure operation - Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost Contact us for more information: Amanda Chen +86 19921054564
As a premium slurry pump manufacturer, we are committed to providing customers with pumps that fully meet ISO9001. Our supeior capabilities and competitive strengths are ideally placed to supply the optimum all kinds of slurry pumps for your business. These pumps can be driven by electric or diesel. Tech-macro AH series Pump Specification: Size range (discharge) : 1 inch to 18 inch (25 mm to 450 mm ) Capacities: to 5,000 m3/hr (to 22,000 gpm) Heads(TDH): to 73 m (to 240 feet) Hard metal slurry pump is successfully applying the range within a wide variety of market sectors and applications; a few of which are specified below: Mining and mineral processing Power generation and steel Aggregate and mineral slurries; mineral and ore processing; cyclone feed and under-flow; tailings disposal; lime and clay slurries; classifier under-flow; dewatering, washdown and sluicing; high density slurries and sludges; highly abrasive solids in suspension; coal preparation; coal and ash slurries; metal waste separation/Recovery Industrial effluents and liquors All abrasive slurries and sludges; abrasive chemical and process liquors; hard solids entrained liquors; sand filter recovery; beach(sand) recovery/ dispersal.
Slurry pumps Our xh model=ah model 1) about us: 1. We are over 10 years leading professional slurry pump manufacturer in china. 2. Top quality of raw material castings. 3. Advanced equipment with mature experiences engineers. 4. Large size factory with strictly quality control system. 2) slurry pump parameter: 1. Size range (discharge):1-18inch 2. Capacity: 10-5400 m3/h 3. Head: 5-125m 4. Impeller type: non-clog (open &close) 5. Shaft sealing: packing/gland packing & mechanical Wooden box
Horizontal Slurry Pumps, Metal Lined Slurry Pumps, Heavy Duty Slurry Pumps Model: SH/100D, SH/150E, SH/200F Series: Metal Lined Slurry Pumps General Introduction: Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance. The pumps are in a wide range of sizes, available with both high chrome and ruber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomer to suit the specific application. Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal. Our metal lined slurry pumps are designed for heavy duty industrial applications, to handle the most arduous slurries. Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures. Applications: Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates Driven Type: DC(z): The pump and the engine is directly connected by a coupling. Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).
Heavy duty slurry pumps are the most comprehensive range of Centrifugal Slurry Pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry. It is including Heavy Media Slurry Pump, Press Feeding Slurry Pump, Wet Crusher Slurry Pump , Fly Ash Slurry Pump, Flotation Slurry Pump, Mineral Processing Slurry Pump, Mineral Concentrate Slurry Pump, Coal Washing Slurry Pump, SAG Mill Discharge Slurry Pump , Thickner Underflow Pump , Mineral Sand Slurry Pump and Hydrocyclone Feed Slurry Pump.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Zidong horizontal slurry pump, centrifugal, double casing structure, international quality, warman replacement pump. It is specially designed to convey solid-liquid mixtures containing high concentration, corrosive and abrasive, hard solid particles, such as: ore slurry, ash, slurry, gravel, etc. It is widely used in mining, metallurgy, power plant, chemical industry, etc.
Shijiazhuang Jiemu Machinery Equipment Co.,Ltd. This Series of Slurry pumps are used conveying abrasive or corrosive slurry, especially clinker of power plants in electric power, bardge,flue gas desulphurization, metallurgy, mineral processing, mining tailings, coal washing, coal ash, paper and pulp, ball mill, filter press.
Tobee 6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids. Design Features: Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely. Interchangeable anti-abrasive wet parts made of high-chrome alloys. The discharge branch can be oriented to any eight positions at the interval of 45 degrees. Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc. The shaft seal uses the packing seal, expeller seal and mechanical seal.
The horizontal slurry pump is a cantilever centrifugal slurry pump, which is suitable for conveying abrasive or corrosive slurry and is widely used in metallurgy, mining, petroleum, chemical industry, coal, electric power, transportation, river dredging, building materials and municipal engineering and other departments. PH pumps have fitted with thicker wear-parts and large-duty frame, suitably transporting highly abrasive high density slurry or lower density high head slurry. Within the maximum allowable working pressure range of the pump, multiple stages can be used in series. For PHJ pumps, the wetted parts of the pump are made of rubber materials. Its pump body, pump cover and transmission parts are the same as PH pumps; it is suitable for conveying fine particles and corrosive slurry.
The horizontal slurry pump is a cantilever centrifugal slurry pump, which is suitable for conveying abrasive or corrosive slurry and is widely used in metallurgy, mining, petroleum, chemical industry, coal, electric power, transportation, river dredging, building materials and municipal engineering and other departments. PH pumps have fitted with thicker wear-parts and large-duty frame, suitably transporting highly abrasive high density slurry or lower density high head slurry. Within the maximum allowable working pressure range of the pump, multiple stages can be used in series. For PHJ pumps, the wetted parts of the pump are made of rubber materials. Its pump body, pump cover and transmission parts are the same as PH pumps; it is suitable for conveying fine particles and corrosive slurry.
ITEM NO. : SB # 2202 S/3 DESCRIPTION : STORAGE BOXES TRUNKS Set of Three Finish : Leather Sizes : Large : 56 * 40.5 * 40.5 cm Medium : 48 * 34 * 34 cm Small : 40.5 * 28 * 28 cm
Application and features: Type ms, hs and hhs pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series. The frame plates for type ms, hs pumps are made of interchangeable, hard metal or pressure moulded elastomer liners. The impellers are made of hard metal or pressure moulded elastomer liners. The frame plate liner and impeller for hhs pump are made of hard metal only. The shaft seal for type ms, hs and hhs pumps is gland seal or centrifugal shaft seal. The discharge branch can be positioned at intervals of 45¡ã by request and oriented to any eight positions to suit installations and applications.
