High Speed M2 1 3343 Jis Skh51 Tool Steel Suppliers and Manufacturers

High-speed copper plating of welding wire is brown brown liquid, which is used for non electrodeposition of high-speed copper plating film on iron to facilitate wire drawing process. It can make copper ions deposit orderly, make copper deposit compact, and have strong adhesion. At the same time, the complexing agent can also effectively complexe excessive iron ions in the tank solution, so that the tank solution remains stable. The deposition film is golden yellow and pink, which is loved by users. It can be used as immersion or continuous production line. The weight of copper film is 5-20g/m2

Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4

Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers

Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container

High hardness stainless steel bee hive tool/beekeeping tool/mini beehive tool Basic Information Place of Origin: china Brand Name: super-sweet Certification: ISO Model Number: hivetools Minimum Order Quantity: 100 Packaging Details: standard carton package Delivery Time: 5 WORKING DAYS Payment Terms: Western Union, MoneyGram, T/T Supply Ability: 100000PCS

Special Use: Cold Heading Steel Material: 45# /60#/70# High Carbon Steel Model Number: 45# - 70# Standard: AISI,ASTM,BS,DIN,GB,JIS Application: Construction

1) galvanized steel zinc coating from 60g/m2 to 150g/m2 2) galvalume steel( Aluzinc steel) AZ30 to AZ150 3) prepainted steel ( color coated steel) top side 18-25micro; back side 5-10micro color: top side can be made as RAL Code

Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.

SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Root vegetable /shellfish cleaning peeling machine : Root vegetable/shellfish cleaning peeling machine adopts the principle of low speed brush cleaning and high speed peeling with sand roller.This machine has the characteristics of small energy consumption,small volume ,light weight,beautiful appearance and convenient operation.The box is made of high quality stainless steel material,no corrosion,clean and hygienic ,the roller is not easy to deform,the brush is made of nylon rope rolling ,durable . Capacity 300-800kg/hour ,power 1.5-2.2kw .

Root vegetable cleaning peeling machine : Root vegetable/shellfish cleaning peeling machine adopts the principle of low speed brush cleaning and high speed peeling with sand roller.This machine has the characteristics of small energy consumption,small volume ,light weight,beautiful appearance and convenient operation.The box is made of high quality stainless steel material,no corrosion,clean and hygienic ,the roller is not easy to deform,the brush is made of nylon rope rolling ,durable . Capacity 300-800kg/hour ,power 1.5-2.2kw .

2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.

Cherry Olive Date Core or Seeds Removing Machine are necessary machine for fruit process . Fruit Seeds Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi plum /Nut and butter/Litchi/ Pear nuclear machine Longan /Automatic nuclear removal machine of large-scale red date Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ... Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.

Olive Cherry Date seeds Removing Machine Fruit seeds stone Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi /Nut and butter/Litchi/ Pear stone removing machine Longan /Automatic stone core removal machine of large-scale red date automatic jujube type /Hawthorn / Beach date /Prunus cherry and so on ...about 20-40kind fruit can be stone removing machine Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.

Fruit Stone Seeds Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine Longan /Automatic nuclear removal machine of large-scale red date Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ... Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.

Fruit Seeds Removing machine series fruit different capacity different ,machine are little different ) Apricot kernel remover stone /core removing machine Peach core remover Apricot,Peach,Jujube nut removing machine Red date/Peach and apricot /Green plum / Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine Longan /Automatic nuclear removal machine of large-scale red date Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ... Technology advantage : 1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal. 2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life. 4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.

Frozen meat slicing machine Frozen meat grater is made of high quality stainless steel ,beautiful appearance ,generous,safe and simple operation,easy to disassemble and clean.The cutting knife to rotate at high speed to cut the frozen meat into slices of different thickness.The meat cut into slices without thawing,to save the frozen meat thawing process and improve the working efficiency .With the chopping machine supporting use ,not only extended the life of the chopping machine ,but also in the meat processing is necessary equipment . Capacity 600-1200kg/hour, power 4kw . Capacity 6-8T/hour ,power 7.5kw . Overall size : 1300*910*1300mm, 1500*720*1400mm.