**Now Available in a Canister with 100 wipes. 12 canisters per case.** 70% Isopropyl Alcohol and 30% Water HEAVY DUTY CLEAN WIPES 150 large surface area (7"x 7") wipes are ideal for solder paste stencils, equipment wrap and general purpose wipe downs and cleaning. Uses light weight cellulose/polyester nonwoven material suitable for ISO Class 5-8, Cleanroom Class 100 -100,000, EU Grade B/C/D and USP EPA COMPLIANT Applications in Sanitizing Surfaces in ISO Class 5 and higher cleanroom environments, USP applications in General equipment wraps, and wipe downs, applying and removing disinfectants n Cleaning of lab equipment and solder paste stencils n General wiping in component prep, compounding, and wash areas Benefits n Dries to zero residue n Non-Ozone depleting n Low extractable levels and particle counts in Economical Method of Use. Use at room temperature. Donot elevate above flash point temperature. Drying can be enhanced with SMT Soft Wipes or air knife. Test a small sample for suitability. Technical Data Wipe Size: 7 x 7 inch; 150 per case 55% cellulose/45% polyester nonwoven cleanroom wiper Vapor Pressure: 1.2 (mmHg) @ 68F Evaporation Rate: .17 (Butyl Acetate=1)* Boiling Point: 346-406F (176-209C) Flash Point: 125F (52C), TCC Specific Gravity: 0.759 (Water = 1) Volatility: 100% Solubility: Slight Hazard: 1 Fire: 2 Toxicity: 1 Reactivity: 0 DOT Rating: Flammable Liquid**N.O.S *Drying time on stencil is under 1 minute. **Flammable Liquid fumes can ignite from direct source of ignition, such as a spark. Effective October 1, 1993, any liquid with a flash point below 140F is considered a flammable liquid by the DOT. This is for shipping purposes only. Disposal Incineration may be acceptable depending on other waste products present in the solvent. Consult your waste hauler. Precautions Keep out of reach of children. Always wear natural rubber gloves, safety glasses and work in a well-ventilated area. Avoid frequent contact with skin. May affect latex painted surfaces. Avoid contact with some vinyl such as ABS and Styrene. Made in the U.S.A
Food product, fmcg products, toothpaste, toothbrush, mouthwash, soap bar, liquid hand wash, body wash, face wash, shampoo & conditioner, body lotion, body cream, body moisturiser, sun control, shaving razor, shaving cartridges, shaving blade, shaving gel, shaving foam, shaving cream, after shave, hair colour, talcum powder, fairness cream, deodorant, roll on, deodorant spray, sanitary napkins, baby diapers, baby wipes, detergent powder, liquid detergent, detergent bar, cleaning powder, cleaning liquid, liquid hand sanitizer, antiseptic liquid, disinfected spray, beverages, tea bag, loose tea, flavoured herbal tea, baby food, candy, chocolate, confectionery, office stationery, and snuff , condoms, beverage and cold drink.
Multifunctional water-based cleaner specially formulated to remove stubborn stains like oil, grease, and dust on machines, metal, plastic, glass, floors, and various other surfaces. It remains safe when it comes into contact with skin. The perfect solution to maintain cleanliness and performance of parts in your company, R219 is odorless and contains a corrosion inhibitor that effectively prevents rust, ensuring equipment remains protected and durable. Clean thoroughly and quickly without the risk of damage! Highly recommended for use : Automotive, Manufacturing, Oil and Gas, Paper Mills, Mining, Food Processing Plants, Heavy Equipment, Construction, Marine, Utilities and Power Generation, Steel Fabrication Industry, etc.
Hand Sanitizer Clean Gel and Spray 1. Excellent removal of varlous harmful bacteria - Removal of various harmful bacteria that cause cold, food poisoning, and eye disease 2. Powerful cleaning - Optimal bactericidal effect containing a high concentration of 70% ethanol 3. Easily without water and soap - Easy to use without water and soap and towels * Price specially negotiable for larger quantities over 10,000pcs and 100,000 pcs respecitvely
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
60*60cm, 5pcs/bag, 10bags/carton. Carton size:31*18*30cm
Woodpulp fabric has high water absorption and the polyester fabric has great strength. White creped surface is very popular type in the global market. The fabric usually use for industrial cleaning fields like machinery car cleaning, machine cleaning. It is worth mentioning that the "Creped" surface can wipe off the dust better.
ITEM NO. : SB # 2202 S/3 DESCRIPTION : STORAGE BOXES TRUNKS Set of Three Finish : Leather Sizes : Large : 56 * 40.5 * 40.5 cm Medium : 48 * 34 * 34 cm Small : 40.5 * 28 * 28 cm
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
1) sushi ginger, wasabi (powder/paste), soy sauce, mirin 2 wet/dry wipes,tissues, and towels,hand sanitizer liquid/gel 3) kraft paper bags for food and gifts, paper containers, stationery.Fob/c&f/exw
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
6N toothbrushes in a blister pack 80 such packs in a case 20 such cases on a pallet pallet size 120 x 100 x 135 by air OR 36 such cases on a pallet pallet size 120 x 100 x 231 by sea OR 500 such cases direct on floor without pallet in a 20 dry container OR 1075 such cases direct on floor without pallet in a 40 dry container OR 1300 such cases direct on floor without pallet in a 40 HC dry container
Each toothbrush in a blister pack 10+2Free blister packs in a hang on card / strip / calendar 48 such hang on cards / strips / calendar in a case i.e. 576 pcs. in a case 16 such cases on a pallet (pallet size 120 x 100 x 127) by air OR 24 such cases on a pallet (pallet size 120 x 100 x 183) by sea OR 425 such cases direct on floor, without pallet in a 20' dry container OR 900 such cases direct on floor, without pallet in a 40â?? dry container OR 900 such cases direct on floor, without pallet in a 40â?? HC dry container.
Each toothbrush in a blister pack 10+2Free blister packs in a hang on card / strip / calendar 48 such hang on cards / strips / calendar in a case i.e. 576 pcs. in a case 20 such cases on a pallet (pallet size 120 x 100 x 115) by air OR 40 such cases on a pallet (pallet size 120 x 100 x 215) by sea OR 475 such cases direct on floor, without pallet in a 20' dry container OR 1,000 such cases direct on floor, without pallet in a 40â?? dry container OR 1,250 such cases direct on floor, without pallet in a 40â?? HC dry container.