ZLYJ Series Gearboxes for Plastic and Rubber Single Screw Rod Extruder is a kind of special reducer researched
and developed by importind the most advanced technology of the hard teeth-surface in the world. For recent ten years, they
are widely used in top and middle grade plastic, rubber and chemical fiber extruders, sell well in the country and are exported
abroad. With a higher reputation in the industry, it has features as follows:
1. The whole machine looks beautiful and liberal, and can be used both vertically and horizontally. It can suit multiple
requirement of assembling.
2. The gear data and box structure are optimally designed by the computer. The gears are made of top grade low carbon
alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the
teeth surface is 54 - 62 HRC. The gear pair has stable running, low noisy and has high driving efficiency.
3. The assembling connector has the precision of radial run-out and end face run-out at international level, and can be
easily connected with screw rod of the machine barrel.
4. The bearing structure of the output shaft has a unique style, which can effectively prolong service life of the bearings.
5. All standard parts such as bearing, oil seal, lubricant oil pump etc. are all top quality products selected from domestic
famous manufacturers. They can be also selected from imported products as per requirement of customer.
SZ series gearbox for conical twin-screw extruder is a special driving unit matched with conical twin-screw rod extruder. It consists of two parts, namely, the reduction box and the distribution box. After reducing speed and increasing torque of the motor, it outputs the motive power to the distribution box, then drives the double output shafts (the included angle is the same with that of twin-screw rods) via a pair of small conical spiral gears with driving ration of 1:1,thus to drive screw rods to rotate outward with different direction.
Product Feature
1.There are involute cylindrical gearbox, which data and structure are optimally designed by the computer.
2.The gears are made of top-quality high strength low carbon alloy steel after carbon penetrating, quench and teeth grinding. It has high hardness on teeth surface, large bearing ability, small noise, smooth operation and high driving efficiency.
3.The material of the distribution box is nodular graphite casting iron and the gears have high-strength ground teeth, in which snake-shaped cooling water pipes are distributed.
4.The maximum input speed of the gearbox is normally not larger than 1500 rpm.
5.The temperature in work environment is -10-45.When temperature is lower than 0,the lubricant oil should be preheated to + 10 before starting.
YPS series gearbox is a standard driving part designed and developed for counter-rotating parallel twin screw extruder. Its gear is made of low carbon alloy steel by carbon penetrating, quench and teeth grinding to reach high strength and precision. The output shaft is finely made of special alloy steel to suit the requirement of large output torque. The thrust bearing group is a combination design that adopts advanced tandem thrust cylindrical roller bearing and full complement cylindrical roller bearings which have a large bearing capacity. The lubrication style adopts oil immersion and spray lubrication and it can also be equipped with pipe style cooling system based on the different requirements of the machine. The whole machine has a well-balanced appearance advanced structure superior bearing performance and smooth operation. It is an ideal selection of counter-rotating parallel twin screw extruder gearbox.
F-53507.T6ARTandem Thrust bearings are comprised of "stages" which include precision ground and matched thrust plates. These bearings also include compression sleeves separated by cylindrical roller assemblies. This design enables the Tandem Thrust bearings to provide a solution in a radial restricted envelope. The bearings are available in multiple stages, 2-8 to accommodate your design requirements. Depending on your preference, these bearings are available in a wide variety of sizes and options.
TandemThrust Bearings can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictional power. In addition, these bearings are moved by oil lubrication. Also thesetandem thrust bearings are used principally in gear boxes for single & twin screw extruders in the rubber and plastic industries.
6679 Extruder Gearbox Suppliers
Short on time? Let Extruder Gearbox sellers contact you.
EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch.
EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.
FEATURES AND BENEFITS:
ï?· Helps to reduce cooking time.
ï?· Reducing oil consumption.
ï?· Improves Crispiness
ï?· Improves Expansion & Volume
ï?· Improves texture.
ï?· Enhance product's flavor.
ï?· 100% Natural and 100% vegetarian product
APPLICATION:
*EXTRUPLUS P1(POTATO BASED) can be used in all type of extruded products like corn puffs, veggie straw snacks, pork rinds, cheese snacks (puffs and curls), Tortilla/Tostada Chips.
*EXTRUPLUS P1(POTATO BASED) is also suitable for Bajji Bonda Mix.
*EXTRUPLUS P1(POTATO BASED) can be applied for Pasta and Noodles.
*Replace 2-5 % of rice flour with EXTRUPLUS P1(POTATO BASED) and add at the time of blending, after adding all raw materials.
DOSAGE
For excellent results, use 2-5% EXTRUPLUS P1(POTATO BASED) of total batch size.
The gearbox of a wind turbine is one of the key components in wind power generation equipment, used to transfer the kinetic energy of the rotating wind turbine to the generator, thereby generating electrical energy. It is usually composed of multiple gears, which increase the speed of the wind turbine through precise transmission ratios and convert it into a speed suitable for the operation of the generator. Usually, the speed of the wind turbine is very low and far from the required speed for the generator to generate electricity. It must be achieved through the speed increasing effect of the gearbox gear pair, so the gearbox is also called a speed increasing gearbox.
JH series gear reducers for cement kilnsare involute cylindrical gear units with parallel shafts which has four reduction stages.This series has four basic structure including over 50 types.Thanks to the standardized,series and modulated design,the reducers can be manufactured according to standard or specific requirements at customers'choice with good reliabiity and maintenance.
The latest XB series gear reducers for roller presses includes totaly 33 models with transmission powerup to 4,000kW and a torque transmission capacity up to 5300KN.m.
According to different cement production lines with transmission power up to 8400kW and ratio from 35:1 to 80:1,we can match JS JST,JD(X)and MDH series central driving mil reducers to meet needs for various cement lines of daily output 2500-10,000 tons.
The variable pitch gear box is an important part of the fan variable pitch system, its main function is to increase the torque of the variable pitch motor on the variable pitch bearing, drive the blade to change the blade pitch Angle at different wind speeds, so that the blade is in the best state of absorbing wind energy, and can drive the blade feathering brake when the wind speed exceeds the cutting wind speed, so as to ensure the machine to run efficiently and smoothly.
The variable gear box transmission mechanism is composed of multiple planetary gear trains, usually 3 stages, and the planetary transmission form is NGW type.
EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate.
