Cemented carbide sleeve adopts raw and auxiliary materials such as primary saturated tungsten carbide, high-purity ultra-fine cobalt powder, precise carbon blending, tilt ball milling, vacuum stirring drying, precision pressing, digital degreasing sintering and pressure sintering personalized post-processing and other advanced powder metallurgy processes. Hard alloy sleeve is widely used in special valve industry, with long service life and reliable quality.
Cemented carbide sleeve adopts raw and auxiliary materials such as primary saturated tungsten carbide, high-purity ultra-fine cobalt powder, precise carbon blending, tilt ball milling, vacuum stirring drying, precision pressing, digital degreasing sintering and pressure sintering personalized post-processing and other advanced powder metallurgy processes. Hard alloy sleeve is widely used in special valve industry, with long service life and reliable quality.
Size: 5-300mm Material: yg6,yg8,yg10,yg12,yg15,yg20,ywn6,ywn8.... Hardness: 89-91HRA Density: 14.5-15.0g/mm3 Machine: OEM customize base on drawing
Tungsten carbide bushing supplier Tungsten carbide wear parts manufacturer We produce many kinds of tungsten carbide wear parts,including tungsten carbide bushing,tungsten carbide rod,tungsten carbide strips,tungsten carbide plated etc. Our tungsten carbide bushing mainly made according to customer's drawing. All different shapes and different specification can be manufacutered. Material grades depends on the bushing's application.
High Quality Tungsten Carbide Wear Bush Surface Machined with OD 50mm to 100mm Tungsten carbide is ideally suited for wear parts, other machine parts and dies which are subject to severe service conditions, such as high temperatures, corrosion and abrasion. In recent years, tungsten carbide has emerged as a superior alternative to steel in many industrial applications. Brief Introduction of Tungsten Carbide Wear Bush: Material: 100% virgin raw material with submicron and average grain size. Tolerance: strict tolerance extent control, which can reach +/-0.01mm; Grades: K10, K20, K30, YG6, YG8, YG8C, YG11C,YG15C and so on. Can be produced as per customers' drawings Advantages of Tungsten Carbide Wear Bush: Abrasive resistant,corrosion free,good compression property,the most wear-resistant bushing ,heat resistance,low maintenance The hardness is 10 times of gold,5 times of tool steel, 4 times of titanium , oil resistance, separate the harmful medium No shape change or twist when temparature is above 1000 �°C or below 500 �°C, long service life , the maximum height can reach 270mm. High precision,whose tolerance can be +/-0.002mm. HIP processed. Professional designed moulds to get complicated shape and high precision tolerances.
Our good quality tungsten carbide is used in drills, saws, die etc. We export our items worldwide as well as China mailand.
Specifications 1.Iso 9001:2008 2.100% virgin raw material 3.From zhuzhou city-tungsten carbide kingdom 4.Hip sintered 5.Having 8 patents In waterproof and shockproof carton
Surgical gown aami level 4 gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; � With knitted cuffs; � Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Disposable surgical gowns level 2 3 4 CE&FDA approved SMS fabric hospital medical surgical gowns With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Surgical gown aami level 3 protective gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Disposable surgical gowns with CE&FDA approved SMS fabric hospital medical surgical gowns With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Surgical gown aami level 4 gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Gown Isolation Wholesale High Quality CPE Gown Plastic PE/CPE Isolation Gown with elastic cuff Long sleeve with elastic cuff ,Tie-on neck and waist provide added comfort  With elastic cuffs; Individual sterile bag packing; PE/CPE material� for durability and protection Lightweight, closed-back design, secured with adjustable ties for maximum comfort  Low-linting material helps to provide a clean environment
Specification: Materialï¼?PP SMS SMMS, PP+PE Gram Weight:30-35g Item Size:115*137CM ,120*140CM ,125*150CM Packageï¼?1pc/bag, 50pcs/ctn Certificatesï¼?CE & FDA Featuresï¼? With 4 waist belts;With Hook & Loop at neck;With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Surgical Gown LEVEL 2-LEVEL 4Blue AMMI Level 2-3 Gown Disposable Medical PP Non-woven Gown SURGICAL GOWNS � Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. � Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. � Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
Recycle surgical gowns hospital medical use green gown reuse over 100 times Surgical Gowns Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. � Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
Surgical gowns 35g level 2 disposable blue surgical medical gowns SURGICAL GOWNS Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. � Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. � Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. � Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
What are details of tungsten carbide ring ? Name Tungsten Carbide,Tungsten Carbide Ring,Tungsten Features 1. High hardness and wear-resistance 2.Good anti-corrosion and heat-resisting 3.High strength and good toughness 4.The hardness and the wear-resistance will not change in 500°C.Even in 1000 °C it still has a high hardness. 5.It is a cemented carbid Representative products 1. Tungsten steel rod 2. Tungsten steel strip 3. Tungsten steel discs 4. Tungsten steel sheet Sizes According to your requirments Packing Normal packing or according t customer's requests. Price The price will change according to the weight of the steel you need. What is the tungsten steel grades? SONGSHUN CB CARBIDE KENNA KYORITSU FUJILLOY ROBLLOY CERATIZIT MG10 KG6 CD-50 TB6 G55 VA40 HC60 MG10.1 EA65 CDKR3150 TB7 G65 VA50 HC70 MG20 ST7 CD60 TB7 G70 VA60 HC80 MG60 VA95 CD70 G8 C95 VA70 HC50 MG80 WF25 CD18 KD10/KD20 F20 RD25 HC40 PD650 WF30 CD650/KR887 KD20 D40 RD30 HC30 PV20 WF40 CD650 KD20 D40 RD40 HC25 PV30 WF30/KG5 KR887 kD40 D50 RD50 HC20 VG1 KG1 CD630 G1 F20 VA30 HC10 VG2 KG2 CD30 G2 F10 VA35 HC20 VG3 KG3 CD35 G3 D30/D40 REA25 HC10 VG4 KG4 CD40 G4/G5 D40/D50 REA30 HC03 PG05 WF05 CD630 KD05 N10 DA10 SMX PG06 WF10 CD-KR885 KD10 F10 FD25 SMS PG07 WF20 CD635 KD05/KD10 D10 RD20 S3X7 PG08 WF15 CD-KR855 KD05/EF10 D20 KA20 S4X7 These are our main products, other tungsten steel can also produce.
CAS No: 1314-34-7 UN No.: 2860 Application As material be used in vanadium battery. As material manufacturing VCl3. Colouring for ceramic industry and glasses industry. Catalyst for Petroleum Processing. Grain refining in tungsten carbides. Be used in capacitor material, electronic components, switch material(magnetic switch, thermal switch, electro-optical switch) etc. Magnetic material.
CAS No: 1314-62-1 UN No.: 2862 Application Catalysts for sulphuric acid, maleic anhydride, adipic acid. Colouring and glaze for ceramic industry. Enameling frits for porcelain or aluminum coating. Pigment and absorption of ultraviolet light or infrared light for glass industry. DeNOx FCC additives for Petroleum Processing. Corrosion inhibition in carbon dioxide scrubbers for gas sweetening of types Benfield, Ventrocoke. Grain refining in tungsten carbides. Manufacturing vanadium aluminum. Additive for Li rechargeable batteries or light emitting substances for display screens. Magnetic material.
