5.8GHz C-band microwave, tri-level dimming function; Input voltage: 12/24V DC; Input current: â?¥25mA; 1~10V DC dimming output signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real daylight minitoring function for built-in application; 8 pin DIP switch setting, multiple options to meet different customer demands; Detection range up to 12m in diameter; Operation temperature: -20~+70 degree; RoHS compliant The price is to be negotiated
5.8GHz C-band microwave motion sensor, tri-level dimming control; Operation voltage: 120-277V AC, 50/60Hz; Rated load: 400W@120V AC(capactive), 800W@200-277V AC(capactive); Stand-by power:
Size: 75.1*26.6*13.8mm; 5.8GHz C-band microwave, on/off function; Input voltage: 12/24V DC ( 5V DC version available on request); Input current: â?¥25mA; 5V DC high-low voltage output signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real Lux-off function for built-in application; 8 pin DIP switch setting, multiple options to meet different customer demands; Detection range up to 12m in diameter; Mounting height: 3-6m; Operation temperature: -20~+70 degree; RoHS compliant The price is to be negotiated
DC motion sensor with 1~10V Dc output; 5.8GHz C-band microwave, tri-level dimming control; Input voltage: 12/24V DC 1~10V DC putput signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real Lux-off & daylight monitoring function for built-in application; IR remote commissioning, easy setting and user friendly; Detection range up to 12m in diameter; Mounting height: 3~6m; Operation temperatue: -20~+70degree; RoHS compliant; The price is to be negotiated
DC motion sensor with 0~10V Dc output; 5.8GHz C-band microwave, tri-level dimming control; Input voltage: 12/24V DC Input curent: â?¥25mA; 0~10V DC putput signal; Super compact size, easy to be integrated; Dual-processor technology, real Lux-off & daylight monitoring function for built-in application; IR remote commissioning, easy setting and user friendly; Detection range up to 16~18m in diameter; Mounting height: max.12m; Operation temperatue: -20~+70degree; RoHS compliant; The price is to be negotiated
Low cost; 5.8GHz C-band miniature transceiver; Patch antenna, antenna gain:2 dBi. Beam aperture: 30º; 2 balanced mixer; 5dBm EIRP output power; Receiver bandwidth: 1Hz ~ 2KHz; Operating current(CW mode):13.5mA@5V; Low power consumption (Pluse mode); Average current:1.5mA typ. Pulse width (min.):10~50μs(10kHz~2kHz); Duty cycle:10% DC RoHS compliant Tested to EN300 400
Standard Motion Sensor Module DC Input Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS102 5.8GHz C-band microwave, tri-level dimming function. Input voltage: 12V DC (5V & 24V DC version available on request). Input current: 25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage: 12V DC (5V & 24V DC version available on request). Input current: �?� 25mA. 0~10V DC dimming output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�??~ +70�?? . RoHS compliant. Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s# sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC PWM output or 0~10V DC signal. Super compact, flexible to be integrated in t o any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature; -20? ~ + 70?. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. ?+? means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. Daylight monitoring function Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough). This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation. Note: Lux-Off sampling time?30s; Lux-On sampling time?10s. Lux-On function takes effect only when standby dimming period set at+?
DC motion sensor with 0~10V DC dimming and daylight harvest function 5.8GHz C-band microwave; Input voltage: 12/24V DC; Input current: â?¥25mA; 0~10V DC ouput signal; Super compact, flexible to be integrated into any suitable fixtures; Dual-processor technology, real daylight monitoring function for built-in application; Dual-processor technology, daylight harvest function, ideal for office / commercial lighting; IR remote commissioning, easy setting and user friendly; Detection rang up to 12m in diameter; Mounting height: 3~6m; Operation temperature: -20~+70 degree; RoHS compliant; The price is to be negotiated.
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:�?�25mA. 5V DC high-low voltage output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Lux-Off function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�?? ~ +70�??. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. -
5V/12V DC Input Microwave Motion Sensor Remote Controllable Version Remote Control DC Input Motion Sensor Motion Sensor Module DC Input HNS111 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage & PWM output signal(0~10v version available on request) Super compact, flexible to be integrated into any suitable fixtures. Dual - PD technology, real Lux -Off & Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor ?? Remote Controllable Version HNS112 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave, tri-level dimming control. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 12m in diameter. Mounting height: 3~6m. RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ??ON/OFF?? button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the ??Dim?? button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings?? Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technolo gy, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~1 2m. Operation temperatur e: -2 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, r eal Lux-Off function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold� to enable or disable the sensor function. "Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark.
APM PRO Analyzer Series: Newly designed for greater clarity and precision, delivering superior performance to exceed your customers' expectations compared to traditional devices. APM PRO 200 for Skin Analysis Measurement Mode: 1. Customer Face 2. Hair Loss Status 3. Scalp Status 4. Hair Density 5. Keratin of Scalp 6. Sensitivity 7. Hair Thickness 8. Hair Pore Status 9. Cuticle Status Unlock sales potential with the power of information: With a wide touch panel and dual lenses, build your own customer CRM. Capture detailed facial images using the x1 lens and store customer information for future business opportunities. Easily compare before-and-after results to enhance customer engagement and satisfaction. Mirroring Function: APM's wide screen expands even further with the mirroring function, allowing customers to view the same screen in real-time during the analysis. At the end of the process, all images and results can be easily shared for a seamless experience. Email Function: Share all analysis images and data effortlessly. Eliminate the need for paper receipts or customer cards. customers can conveniently check their beauty results anytime via email. SPECIFICATION: - Processor: ARM Cortex A7 [Octa Core] - Memory : eMMC 32GB - OS :Android 6.01 [ Marshmallow ] - Image Camera Sensor : Dual Camera Sensor - 1/4 inch Color CMOS [5 Mega Pixel] X1 Camera Sensor / High Magnification Camera Sensor - Sensor Pixel : Total Pixel: 5,038,848 Pixel, Effective Pixel:4,915,200 Pixel - Image Capture Size: VGA: 640(H) X 480(V) / 5 M: 2592(H) X 1944(V) - LED : Dip LED X8 - Motion : 3 Axis - Focusing : VCM Auto Focusing / VCM Manual Focusing - Touch LCD : Type: C-Touch TFT LCD / Size: 4 inch / Resolution: WVGA [480 x 800] - Battery : Type: Li-Ion / Typical Capacity: 2,000 mAh - Normal Voltage: 3.7 V - DC IN Adaptor: 5 V DC / 3 A - Out Dimension : 62 (W) X 138 (H) X 50 (D) mm (with Skin Lens) - Weight : About 120 g (with Battery) - Cradle : Charger / Audio AMP & Speaker - Display Mirroring : Wi-Fi [Wireless LAN] : Smartphone / Tablet [iOS, android] / PC [Windows, Mac]
Power (W): 25/30/50; CCT (K): 5000/6500; Luminous flux (lm): 2100/3200/4600; CRI: >70 Life span (hrs): 30,000/50,000; IP66; Solar Panel: Poly Crystalline Technology, Power (W): 25/65/95, Voltage (V): 5/6, Lifespan: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 20/50/65, Voltage (V): 3.2, Lifespan: 10 years; Five-level dimming with remote control, On/ off lighting by using the ambient light sensor; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
